Time-dependent reliability analysis for function generation mechanisms with random joint clearances

[1]  Milton Abramowitz,et al.  Handbook of Mathematical Functions with Formulas, Graphs, and Mathematical Tables , 1964 .

[2]  M. Abramowitz,et al.  Handbook of Mathematical Functions With Formulas, Graphs and Mathematical Tables (National Bureau of Standards Applied Mathematics Series No. 55) , 1965 .

[3]  J. Chakraborty,et al.  Synthesis of mechanical error in linkages , 1975 .

[4]  Sanjay G. Dhande,et al.  Mechanical Error Analysis of Spatial Linkages , 1978 .

[5]  Sanjay G. Dhande,et al.  Analysis and synthesis of mechanical error in path-generating linkages using a stochastic approach , 1987 .

[6]  Xu Wei-Liang,et al.  Probabilistic analysis and Monte Carlo simulation of the kinematic error in a spatial linkage , 1989 .

[7]  Pardeep Kumar Bhatti.  Probabilistic modeling and optimal design of robotic manipulators , 1989 .

[8]  Jaehoon Choi,et al.  Stochastic Linkage Modeling for Mechanical Error Analysis of Planar Mechanisms , 1998 .

[9]  Jianmin Zhu,et al.  The effects of joint clearance on position and orientation deviation of linkages and manipulators , 2000 .

[10]  Jianmin Zhu,et al.  Uncertainty analysis of planar and spatial robots with joint clearances , 2000 .

[11]  Carlo Innocenti,et al.  Kinematic Clearance Sensitivity Analysis of Spatial Structures With Revolute Joints ( , 2002, DAC 2002.

[12]  Jorge Ambrósio,et al.  Revolute joints with clearance in multibody systems , 2004 .

[13]  Ming-June Tsai,et al.  Kinematic sensitivity analysis of linkage with joint clearance based on transmission quality , 2004 .

[14]  Vincenzo Parenti-Castelli,et al.  Clearance influence analysis on mechanisms , 2005 .

[15]  Qiang Cheng,et al.  Robust synthesis of path generating linkages , 2005 .

[16]  Jorge Ambrósio,et al.  A study on dynamics of mechanical systems including joints with clearance and lubrication , 2006 .

[17]  Weidong Wu,et al.  Uncertainty analysis and allocation of joint tolerances in robot manipulators based on interval analysis , 2007, Reliab. Eng. Syst. Saf..

[18]  Paul V. Preckel,et al.  Gaussian cubature: A practitioner's guide , 2007, Math. Comput. Model..

[19]  Selçuk Erkaya,et al.  A neural–genetic (NN–GA) approach for optimising mechanisms having joints with clearance , 2008 .

[20]  Ming-June Tsai,et al.  Accuracy analysis of a multi-loop linkage with joint clearances , 2008 .

[21]  Xiaoping Du,et al.  Robust Mechanism synthesis with random and interval variables , 2009 .

[22]  S. Erkaya,et al.  Determining link parameters using genetic algorithm in mechanisms with joint clearance , 2009 .

[23]  Zouhaier Affi,et al.  Prediction of the pose errors produced by joints clearance for a 3-UPU parallel robot , 2009 .

[24]  Jian Meng,et al.  Accuracy Analysis of Parallel Manipulators With Joint Clearance , 2009 .

[25]  Selçuk Erkaya,et al.  Optimization of transmission angle for slider-crank mechanism with joint clearances , 2009 .

[26]  Paulo Flores,et al.  Modeling and simulation of wear in revolute clearance joints in multibody systems , 2009 .

[27]  Jorge Ambrósio,et al.  On the contact detection for contact-impact analysis in multibody systems , 2010 .

[28]  B. Kang,et al.  Stochastic approach to kinematic reliability of open-loop mechanism with dimensional tolerance , 2010 .

[29]  Jorge Ambrósio,et al.  Numerical and experimental investigation on multibody systems with revolute clearance joints , 2011 .

[30]  Xiaoping Du,et al.  Time-Dependent Reliability Analysis for Function Generator Mechanisms , 2011 .

[31]  Margarida F. Machado,et al.  A new model for dry and lubricated cylindrical joints with clearance in spatial flexible multibody systems , 2011 .

[32]  M. Bergamasco,et al.  A new screw theory method for the estimation of position accuracy in spatial parallel manipulators with revolute joint clearances , 2011 .

[33]  Xiaoping Du,et al.  Time-dependent probabilistic synthesis for function generator mechanisms , 2011 .

[34]  Xiaoping Du,et al.  Hybrid dimension reduction for mechanism reliability analysis with random joint clearances , 2011 .

[35]  Selçuk Erkaya,et al.  Investigation of joint clearance effects on welding robot manipulators , 2012 .

[36]  M. Pandey,et al.  System reliability analysis of the robotic manipulator with random joint clearances , 2012 .

[37]  Selçuk Erkaya,et al.  Trajectory optimization of a walking mechanism having revolute joints with clearance using ANFIS approach , 2013 .

[38]  Genliang Chen,et al.  A unified approach to the accuracy analysis of planar parallel manipulators both with input uncertainties and joint clearance , 2013 .

[39]  Xiaoping Du.  Time-Dependent Mechanism Reliability Analysis With Envelope Functions and First-Order Approximation , 2014 .

[40]  Xianmin Zhang,et al.  Dynamic analysis of a 3-RRR parallel mechanism with multiple clearance joints , 2014 .

[41]  Liang Xu,et al.  A Kriging Model for Dynamics of Mechanical Systems With Revolute Joint Clearances , 2014 .

[42]  S. M. Varedi,et al.  Optimal dynamic design of a planar slider-crank mechanism with a joint clearance , 2015 .