Analysis of a Micro Gas Turbine Fed by Natural Gas and Synthesis Gas: MGT Test Bench and Combustor CFD Analysis

In recent years, the interest in the research on energy production systems fed by biofuels has increased. Gaseous fuels obtained through biomass conversion processes such as gasification, pyrolysis and pyrogasification are generally defined as synthesis gas (syngas). The use of synthesis gas in small-size energy systems, such as those used for distributed micro-cogeneration, has not yet reached a level of technological maturity that could allow a large market diffusion. For this reason, further analyses (both experimental and numerical) have to be carried out to allow these technologies to achieve performance and reliability typical of established technologies based on traditional fuels. In this paper, a numerical analysis of a combustor of a 100-kW micro gas turbine fed by natural gas and biomass-derived synthesis gas is presented. The work has been developed in the framework of a collaboration between the Engineering Department of the University of Ferrara, the Istituto Motori - CNR (Napoli), and Turbec S.p A. of Corporeno di Cento (FE). The main features of the micro gas turbine Turbec T100, located at the Istituto Motori - CNR, are firstly described. A decompression and distribution system allows the feeding of the micro gas turbine with gaseous fuels characterized by different compositions. Moreover, a system of remote monitoring and control together with a data transfer system has been developed in order to set the operative parameters of the machine. The results of the tests performed under different operating conditions are then presented. Subsequently, the paper presents the numerical analysis of a model of the micro gas turbine combustor. The combustor model is validated against manufacturer performance data and experimental data with respect to steady state performance, i.e., average outlet temperature and emission levels. A sensitivity analysis on the model capability to simulate different operating conditions is then performed. The combustor model is used to simulate the combustion of a syngas, composed of different ratios of hydrogen, carbon monoxide, methane, carbon dioxide and water. The results in terms of flame displacement, temperature and emission distribution and values are analyzed and compared to the natural gas simulations. Finally, some simple modifications to the combustion chamber are proposed and simulated both with natural gas and syngas feeding.

[1]  S. Turns.  Introduction to Combustion , 1995, Aerothermodynamics and Jet Propulsion.

[2]  Peter Dirk Jilles Hoppesteyn.  Application of Low Calorific Value Gaseous Fuels in Gas Turbine Combustors , 1999 .

[3]  Michele Pinelli,et al.  CFD Simulation of a Microturbine Annular Combustion Chamber Fuelled With Methane and Biomass Pyrolysis Syngas: Preliminary Results , 2009 .

[4]  T. Lieuwen,et al.  Fuel Flexibility Influences on Premixed Combustor Blowout, Flashback, Autoignition, and Stability paper addresses the impact of fuel composition on the operability of lean premixed , 2006 .

[5]  Stephen F. Gillette.  Comparison of Microturbines and Reciprocating Engine Generator Sets , 2008 .

[6]  Chiun-Hsun Chen,et al.  Numerical analyses and experiment investigations of an annular micro gas turbine power system using fuels with low heating values , 2009 .

[7]  Francesco Martelli,et al.  Evaluation of a Micro Gas Turbine Fed by Blends of Biomass Producer Gas and Natural Gas , 2008 .

[8]  Svend Bram,et al.  Combustion of syngas in a pressurized microturbine-like combustor: Experimental results , 2010 .

[9]  Don Ferguson,et al.  Fuel Interchangeability for Lean Premixed Combustion in Gas Turbine Engines , 2008 .

[10]  W. P. Jones,et al.  Global reaction schemes for hydrocarbon combustion , 1988 .

[11]  Umberto Desideri,et al.  Gas Turbines Fired With Biomass Pyrolysis Syngas: Analysis of the Overheating of Hot Gas Path Components , 2010 .

[12]  Hiroaki Watanabe,et al.  Numerical simulation of coal gasification in entrained flow coal gasifier , 2006 .

[13]  T. Nussbaumer,et al.  Gas cleaning for IC engine applications from fixed bed biomass gasification , 1999 .

[14]  A. Lefebvre.  Gas Turbine Combustion , 1983 .

[15]  Mauro Venturini,et al.  Assessment of Energy Chains for Distributed Generation: Agricultural and Thermoeconomic Analyses within Emilia-Romagna Region , 2010 .