Effect of ZnO filler on PVA-alkaline solid polymer electrolyte for aluminum-air battery applications

[1]  Mohamad Kamal Harun,et al.  Electrical conductivity studies on PVA/PVP-KOH alkaline solid polymer blend electrolyte , 2005 .

[2]  M. Teridi,et al.  Effect of radiation on conductivity of solid PVA–KOH–PC composite polymer electrolytes , 2006 .

[3]  Chun–Chen Yang,et al.  Alkaline Zn-air and Al-air cells based on novel solid PVA/PAA polymer electrolyte membranes , 2006 .

[4]  Ahmad Azmin Mohamad,et al.  Electrochemical properties of aluminum anodes in gel electrolyte-based aluminum-air batteries , 2008 .

[5]  Shangbin Sang,et al.  Preparation of alkaline solid polymer electrolyte based on PVA–TiO2–KOH–H2O and its performance in Zn–Ni battery , 2008 .

[6]  L. Wang,et al.  The corrosion and electrochemical behavior of pure aluminum in additive‐containing alkaline methanol–water mixed solutions , 2009 .

[7]  T. Okada,et al.  Alkali doped poly(vinyl alcohol) for potential fuel cell applications , 2010 .

[8]  H. Lv,et al.  Alkali Doped Poly(vinyl alcohol) (PVA) for Anion-exchange Membrane Fuel Cells: Ionic Conductivity, Chemical Stability and FT-IR Characterizations , 2010 .

[9]  Biao Wang,et al.  Effects of [Bmim]OH on structure and conductive properties of alkaline PVA/[Bmim]OH membranes , 2010 .

[10]  César A.C. Sequeira,et al.  Polymer electrolytes : fundamentals and applications , 2010 .

[11]  Jianshe Liu,et al.  Alkaline solid polymer electrolyte membranes based on structurally modified PVA/PVP with improved alkali stability , 2010 .

[12]  Mohd Yusri Abd Rahman,et al.  Effect of ZnO nanoparticles filler concentration on the properties of PEO-ENR50-LiCF3SO3 solid polymeric electrolyte , 2011 .

[13]  Bruno Scrosati,et al.  A safe, high-rate and high-energy polymer lithium-ion battery based on gelled membranes prepared by electrospinning , 2011 .

[14]  H. Shao,et al.  The effects of polyethylene glycol (PEG) as an electrolyte additive on the corrosion behavior and electrochemical performances of pure aluminum in an alkaline zincate solution , 2011 .

[15]  Aniruddha B. Pandit,et al.  Improved active anticorrosion coatings using layer-by-layer assembled ZnO nanocontainers with benzotriazole , 2012 .

[16]  Robert J.K. Wood,et al.  Developments in electrode materials and electrolytes for aluminium-air batteries , 2013 .

[17]  Quanan Li,et al.  Effects of acidity and alkalinity on corrosion behaviour of Al–Zn–Mg based anode alloy , 2013 .

[18]  Cuie Wen,et al.  High Energy Density Metal-Air Batteries: A Review , 2013 .

[19]  Quanan Li,et al.  Electrochemical polarization and corrosion behavior of Al–Zn–In based alloy in acidity and alkalinity solutions , 2013 .

[20]  Soumya Pandit,et al.  Application of PVA-PDDA polymer electrolyte composite anion exchange membrane separator for improved bioelectricity production in a single chambered microbial fuel cell. , 2014 .

[21]  Moon-Sung Kang,et al.  On-site crosslinked quaternized poly(vinyl alcohol) as ionomer binder for solid alkaline fuel cells , 2014 .

[22]  B. Ramezanzadeh,et al.  Electrochemical investigation of the properties of Co doped ZnO nanoparticle as a corrosion inhibitive pigment for modifying corrosion resistance of the epoxy coating , 2014 .

[23]  Jen-Ming Yang,et al.  Preparation and characterization of poly(vinyl alcohol)/sodium alginate blended membrane for alkaline solid polymer electrolytes membrane , 2014 .

[24]  N. R. Dhineshbabu,et al.  Electrical measurement of PVA/graphene nanofibers for transparent electrode applications , 2014 .

[25]  B. Nagabhushana,et al.  Synthesis, characterization and optical properties of hybrid PVA–ZnO nanocomposite: A composition dependent study , 2014 .

[26]  Yu Song,et al.  All-solid-state Al–air batteries with polymer alkaline gel electrolyte , 2014 .

[27]  Yunfeng Zhu,et al.  Alkaline poly(vinyl alcohol)/poly(acrylic acid) polymer electrolyte membrane for Ni-MH battery application , 2014, Ionics.

[28]  Jinbao Zhao,et al.  Cross-linked anion exchange membranes with pendent quaternary pyrrolidonium salts for alkaline polymer electrolyte membrane fuel cells , 2015 .

[29]  S. Moulay.  Review: Poly(vinyl alcohol) Functionalizations and Applications , 2015 .

[30]  E. Fatas,et al.  Performance of commercial aluminium alloys as anodes in gelled electrolyte aluminium-air batteries , 2015 .

[31]  R. Marcilla,et al.  Recent Advances in Innovative Polymer Electrolytes based on Poly(ionic liquid)s , 2015 .

[32]  H. Kaddami,et al.  Potential of blend of kappa-carrageenan and cellulose derivatives for green polymer electrolyte application , 2015 .

[33]  Huimin Lu,et al.  Performance of fine structured aluminum anodes in neutral and alkaline electrolytes for Al-air batteries , 2015 .

[34]  A. Zendehnam,et al.  Fabrication of polyvinylchloride based nanocomposite thin film filled with zinc oxide nanoparticles: Morphological, thermal and optical characteristics , 2015 .

[35]  V. Mottaghitalab,et al.  Fabrication of a supercapacitor with a PVA-KOH-KI electrolyte and nanosilver flexible electrodes , 2015 .

[36]  N. H. Hassan,et al.  Biopolymer electrolytes based on carboxymethyl ҡ-carrageenan and imidazolium ionic liquid , 2016, Ionics.

[37]  Ryohei Mori.  Addition of Ceramic Barriers to Aluminum–Air Batteries to Suppress By-product Formation on Electrodes , 2015 .

[38]  N. H. Hassan,et al.  Bifunctional ionic liquid in conductive biopolymer based on chitosan for electrochemical devices application , 2015 .

[39]  Zejie Zhang,et al.  Zinc electrode with anion conducting polyvinyl alcohol/poly(diallyldimethylammonium chloride) film coated ZnO for secondary zinc air batteries , 2015 .

[40]  W. Daud,et al.  Recent developments in materials for aluminum–air batteries: A review , 2015 .

[41]  M. S. Su’ait,et al.  Review on polymer electrolyte in dye-sensitized solar cells (DSSCs) , 2015 .

[42]  Jen-Ming Yang,et al.  Preparation of graphene-based poly(vinyl alcohol)/chitosan nanocomposites membrane for alkaline solid electrolytes membrane , 2015 .

[43]  D. Frihi,et al.  Optimization of the crystallinity of polypropylene/submicronic-talc composites: The role of filler ratio and cooling rate , 2016 .

[44]  Tong Lin,et al.  Synergistic effects of carboxymethyl cellulose and ZnO as alkaline electrolyte additives for aluminium anodes with a view towards Al-air batteries , 2016 .

[45]  Darwin Sebayang,et al.  Preliminary study on aluminum-air battery applying disposable soft drink cans and Arabic gum polymer , 2017 .

[46]  A. Sharma,et al.  Effect of variation of different nanofillers on structural, electrical, dielectric, and transport properties of blend polymer nanocomposites , 2018, Ionics.

[47]  F. Ren,et al.  Influences of L-Cysteine/Zinc Oxide Additive on the Electrochemical Behavior of Pure Aluminum in Alkaline Solution , 2018 .

[48]  T. Kuruganti,et al.  Laser Sintering of Printed Anodes for Al-Air Batteries , 2018 .