Constitutive modeling of metastable austenitic stainless steel

A constitutive model is developed for the prediction of the mechanical behavior of metastable austenitic stainless steels that undergo phase transformation during deformation. A transformation model is proposed that is based on the action of applied stress through the concept of mechanical driving force. The transformation plasticity phenomenon is incorporated by considering the relative orientation of transforming grains. Furthermore, a mean-field homogenization algorithm is utilized to compute the mechanical behavior of the elastic-plastic composite during transformation.

[1]  J. Lof,et al.  Adaptive return mapping algorithms for J2 elasto‐viscoplastic flow , 2001 .

[2]  G. W. Greenwood,et al.  The deformation of metals under small stresses during phase transformations , 1965, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[3]  H. Yu,et al.  Transformation behavior of retained austenite under different deformation modes for low alloyed TRIP-assisted steels , 2006 .

[4]  J. Ganghoffer,et al.  A micromechanical model of the martensitic transformation , 1998 .

[5]  Michael T. Heath,et al.  Scientific Computing: An Introductory Survey , 1996 .

[6]  Issam Doghri,et al.  Micromechanical modeling and computation of elasto-plastic materials reinforced with distributed-orientation fibers , 2005 .

[7]  A. Combescure,et al.  Experimental study of the phase transformation plasticity of 16MND5 low carbon steel induced by proportional and nonproportional biaxial loading paths , 2004 .

[8]  T. Angel,et al.  Formation of Martensite in Austenitic Stainless Steels , 1954 .

[9]  Fpt Frank Baaijens,et al.  An approach to micro-macro modeling of heterogeneous materials , 2001 .

[10]  E. Kozeschnik,et al.  Mechanical stabilisation of eutectoid steel , 2007 .

[11]  Z. Tourki,et al.  The kinetic of induced martensitic formation and its effect on forming limit curves in the AISI 304 stainless steel , 2005 .

[12]  I. Tamura,et al.  Deformation-induced martensitic transformation and transformation-induced plasticity in steels , 1982 .

[13]  S. Zwaag,et al.  Micromechanical predictions of TRIP steel behavior as a function of microstructural parameters , 2007 .

[14]  R. Hill.  Elastic properties of reinforced solids: some theoretical principles , 1963 .

[15]  Yoshihiro Tomita,et al.  Investigation on deformation mode dependence of strain-induced martensitic transformation in trip steels and modelling of transformation kinetics , 1998 .

[16]  R. Hill.  A self-consistent mechanics of composite materials , 1965 .

[17]  Tae-Ho Lee,et al.  A model for deformation behavior and mechanically induced martensitic transformation of metastable austenitic steel , 2004 .

[18]  R. D. Wood,et al.  Nonlinear Continuum Mechanics for Finite Element Analysis , 1997 .

[19]  S. Shtrikman,et al.  A variational approach to the theory of the elastic behaviour of multiphase materials , 1963 .

[20]  J. Llorca,et al.  A self-consistent approach to the elasto-plastic behaviour of two-phase materials including damage , 2000 .

[21]  Akhtar S. Khan,et al.  Continuum theory of plasticity , 1995 .

[22]  J. Serri,et al.  Finite element analysis of the effects of martensitic phase transformation in TRIP steel sheet forming , 2005 .

[23]  K. Mori,et al.  Finite element analysis of the formability of an austenitic stainless steel sheet in warm deep drawing , 2003 .

[24]  Wei Min Huang,et al.  “Yield” surfaces of shape memory alloys and their applications , 1999 .

[25]  H. Bhadeshia,et al.  Driving force for martensitic transformation in steels , 1981 .

[26]  V. V. Kosarchuk,et al.  Influence of phase transformations on the mechanical properties of austenitic stainless steels , 2000 .

[27]  J. Mackenzie,et al.  The crystallography of martensite transformations III. Face-centred cubic to body-centred tetragonal transformations , 1954 .

[28]  J. C. Rice,et al.  On numerically accurate finite element solutions in the fully plastic range , 1990 .

[29]  J. Huetink.  On the simulation of thermo-mechanical forming processes , 1986 .

[30]  Issam Doghri,et al.  Effective elasto-plastic properties of inclusion-reinforced composites. Study of shape, orientation and cyclic response , 2005 .

[31]  H. Bhadeshia,et al.  Crystallographic texture and intervening transformations , 2007 .

[32]  Larry Kaufman,et al.  Thermodynamics and kinetics of martensitic transformations , 1958 .

[33]  Toshio Mura,et al.  Micromechanics of defects in solids , 1982 .

[34]  K. Tanaka,et al.  The hardening of crystals by non-deforming particles and fibres , 1970 .

[35]  Wing Kam Liu,et al.  Nonlinear Finite Elements for Continua and Structures , 2000 .

[36]  C. M. Wayman,et al.  Introduction to the crystallography of martensitic transformations , 1964 .

[37]  Sia Nemat-Nasser,et al.  Elastic-plastic composites at finite strains , 1985 .

[38]  Georges Cailletaud,et al.  Experimental Study of the Transformation-Induced Plasticity in a Cr-Ni-Mo-Al-Ti Steel , 1996 .

[39]  Dimitris C. Lagoudas,et al.  On the numerical evaluation of Eshelby's tensor and its application to elastoplastic fibrous composites , 1990 .

[40]  T. Iwakuma,et al.  Finite elastic-plastic deformation of polycrystalline metals , 1984, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[41]  Amine Ouaar,et al.  Homogenization of two-phase elasto-plastic composite materials and structures: Study of tangent operators, cyclic plasticity and numerical algorithms , 2003 .

[42]  F. Delannay,et al.  Multiscale mechanics of TRIP-assisted multiphase steels: I. Characterization and mechanical testing , 2007 .

[43]  J. D. Eshelby.  The determination of the elastic field of an ellipsoidal inclusion, and related problems , 1957, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[44]  Morris Cohen,et al.  Criterion for the action of applied stress in the martensitic transformation , 1953 .

[45]  H. Bhadeshia,et al.  Transformation induced plasticity assisted steels: Stress or strain affected martensitic transformation? , 2007 .

[46]  C. L. Magee,et al.  TRANSFORMATION KINETICS, MICROPLASTICITY AND AGING OF MARTENSITE IN FE-31 NI. , 1966 .

[47]  P ? ? ? ? ? ? ? % ? ? ? ? , 1991 .

[48]  André Zaoui,et al.  An extension of the self-consistent scheme to plastically-flowing polycrystals , 1978 .

[49]  Toshio Mura,et al.  The Elastic Field Outside an Ellipsoidal Inclusion , 1977 .

[51]  G. P. Tandon,et al.  Average stress in the matrix and effective moduli of randomly oriented composites , 1986 .

[52]  G. B. Olson,et al.  A MECHANISM FOR THE STRAIN-INDUCED NUCLEATION OF MARTENSITIC TRANSFORMATIONS* , 1972 .

[53]  G. Weng,et al.  An energy criterion for the stress-induced martensitic transformation in a ductile system , 1994 .

[54]  H. Bhadeshia,et al.  Transformation texture in deformed stainless steel , 2006 .

[55]  Rodney Hill,et al.  Continuum micro-mechanics of elastoplastic polycrystals , 1965 .

[56]  Gregory B Olson,et al.  Kinetics of strain-induced martensitic nucleation , 1975 .

[57]  M. Cherkaoui,et al.  Deformation behavior and microstructure/texture evolution of an annealed 304 AISI stainless steel sheet. Experimental and micromechanical modeling , 2007 .

[58]  G. B. Olson,et al.  Distributed-activation kinetics of heterogeneous martensitic nucleation , 1992 .

[59]  E. Kröner.  Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls , 1958 .

[60]  Matti Ristinmaa,et al.  A constitutive model for the formation of martensite in austenitic steels under large strain plasticity , 2007 .

[61]  A. Reid,et al.  A continuum description of dislocations in elastically nonlinear media: martensitic embryo formation , 2001 .

[62]  G. B. Olson,et al.  Continuum modeling of strain-induced martensitic transformation at shear-band intersections , 1998 .

[63]  R. G. Stringfellow,et al.  A constitutive model for transformation plasticity accompanying strain-induced martensitic transformations in metastable austenitic steels , 1992 .

[64]  Y. Benveniste,et al.  A new approach to the application of Mori-Tanaka's theory in composite materials , 1987 .

[65]  F. Fischer,et al.  A micromechanical study on the coupling effect between microplastic deformation and martensitic transformation , 1994 .

[66]  Robert Davis Cook,et al.  Finite Element Modeling for Stress Analysis , 1995 .

[67]  Sia Nemat-Nasser,et al.  Averaging theorems in finite deformation plasticity , 1999 .

[68]  Yoshihiro Tomita,et al.  Constitutive modeling of TRIP steel and its application to the improvement of mechanical properties , 1995 .

[69]  G. Bolling,et al.  The plastic deformation of ferromagnetic face-centred cubic Fe-Ni-C alloys , 1969 .

[70]  J. Mackenzie,et al.  The crystallography of martensite transformations II , 1954 .

[71]  A. Schlömerkemper,et al.  Comparison of several models for the determination of the phase transformation yield surface in shape-memory alloys with experimental data , 2007 .