Abstract The aim of the present research was to investigate influence of surface preparation on roughness parameters and correlation between roughness parameters and friction and wear. First the correlation between different surface preparation techniques and roughness parameters was investigated. For this purpose 100Cr6 steel plate samples were prepared in terms of different average surface roughness, using different grades of grinding, polishing, turning and milling. Different surface preparation techniques resulted in different R a values from 0.02 to 7 μm. After this, correlation between surface roughness parameters and friction and wear was investigated. For this reason dry and lubricated pin-on-disc tests, using different contact conditions, were carried out, where Al 2 O 3 ball was used as counter-body. It was observed that parameters R ku , R sk , R pk and R vk tend to have influence on coefficient of friction.
[1]
D. Spaltmann,et al.
The influence of roughness on friction: Part I: The influence of a single step
,
2002
.
[2]
B. Bhushan.
Contact mechanics of rough surfaces in tribology: multiple asperity contact
,
1998
.
[3]
Andreas A. Polycarpou,et al.
Modeling the effect of skewness and kurtosis on the static friction coefficient of rough surfaces
,
2004
.
[4]
F. Svahn,et al.
The influence of surface roughness on friction and wear of machine element coatings
,
2003
.
[5]
Wen-Ruey Chang,et al.
The effects of cut-off length on surface roughness parameters and their correlation with transition friction
,
2004
.
[6]
Yuan-zhong Hu,et al.
Effect of surface roughness parameters on mixed lubrication characteristics
,
2006
.