PECVD low stress silicon nitride analysis and optimization for the fabrication of CMUT devices

Two technological options to achieve a high deposition rate, low stress plasma-enhanced chemical vapor deposition (PECVD) silicon nitride to be used in capacitive micromachined ultrasonic transducers (CMUT) fabrication are investigated and presented. Both options are developed and implemented on standard production line PECVD equipment in the framework of a CMUT technology transfer from R & D to production. A tradeoff between deposition rate, residual stress and electrical properties is showed.The first option consists in a double layer of silicon nitride with a relatively high deposition rate of ~100 nm min−1 and low compressive residual stress, which is suitable for the fabrication of the thick nitride layer used as a mechanical support of the CMUTs. The second option involves the use of a mixed frequency low-stress silicon nitride with outstanding electrical insulation capability, providing improved mechanical and electrical integrity of the CMUT active layers. The behavior of the nitride is analyzed as a function of deposition parameters and subsequent annealing. The nitride layer characterization is reported in terms of interfaces density influence on residual stress, refractive index, deposition rate, and thickness variation both as deposited and after thermal treatment. A sweet spot for stress stability is identified at an interfaces density of 0.1 nm−1, yielding 87 MPa residual stress after annealing. A complete CMUT device fabrication is reported using the optimized nitrides. The CMUT performance is tested, demonstrating full functionality in ultrasound imaging applications and an overall performance improvement with respect to previous devices fabricated with non-optimized silicon nitride.