Phenomenology during the loss of residual heat removal system at midloop conditions with pressurizer PORVs open: Associated boron dilution

Abstract The loss of residual heat removal system (RHRS) at midloop operation is an important risk contributor at low power and shutdown conditions. In this kind of transient the reflux-condensation can play an important role during the sequence to avoid the core damage. Several simulations concerning the loss of the RHRS in a PWR-W with the pressurizer PORVs open have been carried out with TRACE code considering the availability of steam generators. The present study aims to analyze, firstly, the thermal-hydraulic behavior after the loss of RHRS at midloop conditions throughout different configurations with reflux-condensation as the sole cooling mechanism available, and secondly, the issue related to the boron dilution that takes place during this kind of transient. The simulation results show that in the open RCS configuration, an equilibrium pressure is obtained in all cases and the reflux-condensation removes an important part of the decay heat. Moreover, in some configurations, this mechanism may cause the formation of an unborated water slug in the crossover leg that can lead to a boron dilution sequence.

[1]  Juhani Hyvärinen,et al.  The inherent boron dilution mechanism in pressurized water reactors , 1993 .

[2]  Kostadin Ivanov,et al.  Numerical diffusion and the tracking of solute fields in system codes: Part III. Application to a boron dilution transient analysis in the AP600 , 1998 .

[4]  Frank-Peter Weiss,et al.  Experimental and Numerical Investigation of Boron Dilution Transients in Pressurized Water Reactors , 2003 .

[5]  C. H. Lee,et al.  Investigation of mid-loop operation with loss of RHR at INER integral system test (IIST) facility , 1996 .

[6]  A. Kumbaro,et al.  An Approximate Linearized Riemann Solver for a Two-Fluid Model , 1996 .

[7]  Lionel Sainsaulieu,et al.  Finite volume approximation of two phase-fluid flows based on an approximate Roe-type Riemann solver , 1995 .

[8]  Rafael Macian-Juan,et al.  Numerical diffusion and the tracking of solute fields in system codes: Part II. Multi-dimensional flows , 1998 .

[9]  M. Rajamaeki.  Elimination of numerical diffusion in 1 - phase and 2 - phase flows , 1997 .

[10]  I. Toumi,et al.  An upwind numerical method for two-fluid two-phase flow models , 1996 .

[11]  M. Y. Young,et al.  Flooding in the pressurizer surge line of AP600 plant and analyses of APEX data , 1999 .

[12]  César Queral,et al.  TRACE Model of Almaraz Nuclear Power Plant , 2005 .

[13]  I. Toumi,et al.  FLICA-4: a three-dimensional two-phase flow computer code with advanced numerical methods for nuclear applications , 2000 .

[14]  R. Deruaz,et al.  Loss of residual heat removal during mid-loop operation : BETHSY experiments , 1994 .

[15]  E. Hughes,et al.  Thermal-hydraulic processes during reduced inventory operation with loss of residual heat removal , 1992 .