Nanosecond laser induced damage in RbTiOPO4: the missing influence of crystal quality.

Nanosecond laser induced damage in RbTiOPO(4) (RTP) an isomorphic material to the more widely known KTiOPO(4) (KTP) is studied in crystals with varying properties. The ionic conductivity along the z-axes of the tested crystals ranged from 1.5 10(-9) S/cm to 1.1 10(-12) S/cm. Further, different growth sectors with different absorption in the range of hundreds of ppm/cm and differing zones in inhomogeneous crystals have been investigated. Despite these important differences in crystal quality, no significant difference could be observed in the laser damage resistance at 1064 nm. Thus growth induced defects only play a minor role in nanosecond laser induced damage in RTP. Transient, laser induced defects are discussed in analogy with KTP as possible laser damage precursors.

[1]  N. Angert,et al.  Oxide crystals for electro-optic Q-switching of lasers , 2005 .

[2]  A. Migdall,et al.  A versatile waveguide source of photon pairs for chip-scale quantum information processing. , 2009, Optics express.

[3]  L. Lamaignère,et al.  An accurate, repeatable, and well characterized measurement of laser damage density of optical materials. , 2007, The Review of scientific instruments.

[4]  H. Yoshida,et al.  Dependences of Laser-Induced Bulk Damage Threshold and Crack Patterns in Several Nonlinear Crystals on Irradiation Direction , 2006 .

[5]  S. Verma,et al.  Imaging techniques for mapping solution parameters, growth rate, and surface features during the growth of crystals from solution , 2008 .

[6]  S G Demos,et al.  Expedited laser damage profiling of KDxH(2-x)PO4 with respect to crystal growth parameters. , 2006, Optics letters.

[7]  Robert L. Byer,et al.  Absolute and relative nonlinear optical coefficients of KDP, KD*P, BaB/sub 2/O/sub 4/, LiIO/sub 3/, MgO:LiNbO/sub 3/, and KTP measured by phase-matched second-harmonic generation , 1990 .

[8]  V. Mürk,et al.  Gray tracks in KTiOPO4: Mechanism of creation and bleaching , 1998 .

[9]  M. Roth,et al.  Growth of high resistivity RbTiOPO4 crystals , 2008 .

[10]  Laurent Gallais,et al.  Optimized metrology for laser-damage measurement: application to multiparameter study. , 2003, Applied optics.

[11]  A. Hildenbrand,et al.  Laser damage resistance of RbTiOPO(4): evidence of polarization dependent anisotropy. , 2007, Optics express.

[12]  Thomas C. Sidler,et al.  High-power long-pulse second harmonic generation and optical damage with free-running Nd:YAG laser , 2003 .

[13]  M. Roth,et al.  EPR and ENDOR study of an oxygen-vacancy-associated Ti3+ center in RbTiOPO4 crystals , 2007 .

[14]  Anne Hildenbrand,et al.  Laser damage investigation in KTiOPO4 (KTP) and RbTiOPO4 (RTP) crystals: threshold anisotropy and the influence of SHG , 2007, SPIE Laser Damage.

[15]  A. Hildenbrand,et al.  Laser-induced damage investigation at 1064 nm in KTiOPO4 crystals and its analogy with RbTiOPO4. , 2009, Applied optics.

[16]  M Commandré,et al.  Effect of multiple laser irradiations on silica at 1064 and 355 nm. , 2005, Optics letters.

[17]  Martin M. Fejer,et al.  UV and visible absorption in LiTaO3 , 1999, Photonics West.

[18]  M. Roth,et al.  On the optical quality of KTP crystals for nonlinear optical and electro-optic applications , 2001 .

[19]  Fredrik Laurell,et al.  Dynamics of green light-induced infrared absorption in KTiOPO4 and periodically poled KTiOPO4 , 2004 .

[21]  Laurent Gallais,et al.  Investigation of nanoprecursors threshold distribution in laser-damage testing , 2005 .

[22]  Anne Hildenbrand,et al.  Accurate metrology for laser damage measurements in nonlinear crystals , 2008 .