Analysis of drying wood based on nondestructive measurements and numerical tools

Improved understanding of moisture and mechanical behaviour is a general objective for wood drying research. The main objective of this doctoral thesis was to develop nondestructive experimental me ...

[1]  Paul Geladi,et al.  Principal Component Analysis , 1987, Comprehensive Chemometrics.

[2]  Ulf Edlund,et al.  Prediction of strength parameters for softwood kraft pulps , 1998 .

[3]  Medical CT-scanners for non-destructive wood density and moisture content measurements , 1992 .

[4]  William T. Simpson,et al.  AN INVERSE MOISTURE DIFFUSION ALGORITHM FOR THE DETERMINATION OF DIFFUSION COEFFICIENT , 2001 .

[5]  Mikael Sjödahl.  Strain field measurements using electronic speckle photography : a comparison , 1994 .

[6]  J. L. Thorpe,et al.  Image analysis to measure strain in wood and paper , 1991, Wood Science and Technology.

[7]  H. Pfeifer.  Principles of Nuclear Magnetic Resonance Microscopy , 1992 .

[8]  C. Foley,et al.  A three-dimensional paradigm of fiber orientation in timber , 2001, Wood Science and Technology.

[9]  J. Danvind.  Measuring strain and moisture content in a cross section of drying wood using Digital Speckle Photography and Computerised X-ray Tomography , 2003 .

[10]  A. Hukka,et al.  The Effective Diffusion Coefficient and Mass Transfer Coefficient of Nordic Softwoods as Calculated from Direct Drying Experiments , 1999 .

[11]  J. Danvind.  PLS prediction as a tool for modeling wood properties , 2002, Holz als Roh- und Werkstoff.

[12]  B. Kowalski,et al.  Partial least-squares regression: a tutorial , 1986 .

[13]  J. Blomberg.  Compression mechanisms and strenght properties of semi-isostatically densified wood , 2004 .

[14]  Mats Ekevad,et al.  Method to compute fiber directions in wood from computed tomography images , 2004, Journal of Wood Science.

[15]  T. Morén,et al.  Using X-ray CT scanning for moisture and displacement measurements in knots and their surroundings , 2004 .

[16]  Paul Glover,et al.  High Resolution Measurement of the Surface Layer Moisture Content during Drying of Wood Using a Novel Magnetic Resonance Imaging Technique , 2002 .

[17]  M. Sjödahl.  Electronic speckle photography applied to in-plane deformation and strain field measurements , 1995 .

[18]  Anders Grönlund,et al.  Predicting spiral grain by computed tomography of Norway spruce , 2002, Journal of Wood Science.

[19]  Erik Johansson,et al.  QSAR Model Validation , 2000 .

[20]  Olle Hagman,et al.  Real-time spectral classification of compression wood inPicea abies , 1999, Journal of Wood Science.

[21]  K. Lindberg,et al.  Interaction between wood and polyurethane‐alkyd lacquer resulting in a decrease in the glass transition temperature , 2002 .

[22]  Jesper Arfvidsson,et al.  Measurement and Evaluation of Moisture Transport Coefficients During Drying of Wood , 1997 .