Effects of spalling fault on dynamic responses of gear system considering three-dimensional line contact elasto-hydrodynamic lubrication

[1]  W. Zhai,et al.  Vibration feature of spur gear transmission with non-uniform depth distribution of tooth root crack along tooth width , 2021, Engineering Failure Analysis.

[2]  W. Zhai,et al.  An improved dynamic model of spur gear transmission considering coupling effect between gear neighboring teeth , 2021, Nonlinear Dynamics.

[3]  Aijun Hu,et al.  Failure dynamic modelling and analysis of planetary gearbox considering gear tooth spalling , 2021, Engineering Failure Analysis.

[4]  R. Zhu,et al.  An improved mesh stiffness model for double-helical gear pair with spalling defects considering time-varying friction coefficient under mixed EHL , 2020 .

[5]  Kaiyun Wang,et al.  Improved analytical calculation model of spur gear mesh excitations with tooth profile deviations , 2020 .

[6]  Fulin Wang,et al.  Vibration response and fault characteristics analysis of gear based on time-varying mesh stiffness , 2020 .

[7]  Hui Ma,et al.  Meshing and dynamic characteristics analysis of spalled gear systems: A theoretical and experimental study , 2020 .

[8]  Yimin Shao,et al.  Fault feature extraction of rotating machinery using a reweighted complete ensemble empirical mode decomposition with adaptive noise and demodulation analysis , 2020 .

[9]  W. Cao,et al.  Transient behaviors of friction, temperature and fatigue in different contact trajectories for spiral bevel gears , 2020 .

[10]  Jiaxu Wang,et al.  Calculation of Gear Meshing Stiffness Considering Lubrication , 2020 .

[11]  Bin Zhao,et al.  Three-dimensional mixed lubrication analysis of spur gears with machined roughness , 2019 .

[12]  B. Wen,et al.  Calculation of mesh stiffness of spur gears considering complex foundation types and crack propagation paths , 2019, Mechanical Systems and Signal Processing.

[13]  Changjiang Zhou,et al.  Tribo-dynamics model of a spur gear pair with gyroscopic effect and flexible shaft , 2019, Forschung im Ingenieurwesen.

[14]  Jinxi Zhang,et al.  Thermal elastohydrodynamic lubrication analysis of helical gear pair under starved lubrication condition , 2019, Lubrication Science.

[15]  Tongtong Liu,et al.  Improvement on Meshing Stiffness Algorithms of Gear with Peeling , 2019, Symmetry.

[16]  Bangchun Wen,et al.  Comparison of meshing characteristics of helical gears with spalling fault using analytical and finite-element methods , 2019, Mechanical Systems and Signal Processing.

[17]  Yang Luo,et al.  A shape-independent approach to modelling gear tooth spalls for time varying mesh stiffness evaluation of a spur gear pair , 2019, Mechanical Systems and Signal Processing.

[18]  Ming Liang,et al.  Dynamical modeling and experimental validation for tooth pitting and spalling in spur gears , 2019, Mechanical Systems and Signal Processing.

[19]  Liming Wang,et al.  A new adaptive evolutionary digital filter based on alternately evolutionary rules for fault detection of gear tooth spalling , 2019, Mechanical Systems and Signal Processing.

[20]  Wanming Zhai,et al.  Vibration feature evolution of locomotive with tooth root crack propagation of gear transmission system , 2019, Mechanical Systems and Signal Processing.

[21]  Hong Wang,et al.  Novel mathematical modelling methods of comprehensive mesh stiffness for spur and helical gears , 2018, Applied Mathematical Modelling.

[22]  Ming Liang,et al.  Evaluation of the time-varying mesh stiffness for gears with tooth spalls with curved-bottom features , 2018, Engineering Failure Analysis.

[23]  Changjiang Zhou,et al.  Stiffness and damping models for the oil film in line contact elastohydrodynamic lubrication and applications in the gear drive , 2018, Applied Mathematical Modelling.

[24]  Wennian Yu,et al.  A new dynamic model of a cylindrical gear pair with localized spalling defects , 2018 .

[25]  Henry Peredur Evans,et al.  Effects of profile errors on lubrication performance of helical gears , 2017 .

[26]  Sheng Li,et al.  A tribo-dynamic contact fatigue model for spur gear pairs , 2017 .

[27]  Liming Wang,et al.  Fault mode analysis and detection for gear tooth crack during its propagating process based on dynamic simulation method , 2017 .

[28]  Bangchun Wen,et al.  Time-varying mesh stiffness calculation of spur gears with spalling defect , 2016 .

[29]  J.-P. Stemplinger,et al.  Engineering Software Solution for Thermal Elastohydrodynamic Lubrication Using Multiphysics Software , 2016 .

[30]  D. M. McFarland,et al.  Analytical characterization of damping in gear teeth dynamics under hydrodynamic conditions , 2015 .

[31]  Hui Ma,et al.  Review on dynamics of cracked gear systems , 2015 .

[32]  Sheng Li,et al.  A tribo-dynamic model of a spur gear pair , 2013 .

[33]  Rui Ma,et al.  Research on dynamics and fault mechanism of spur gear pair with spalling defect , 2012 .

[34]  Wei Chen,et al.  A Three-Dimensional Deterministic Model for Rough Surface Line-Contact EHL Problems , 2007 .

[35]  Sandeep M. Vijayakar,et al.  A study of the relationship between the dynamic factors and the dynamic transmission error of spur gear pairs , 2007 .

[36]  Philippe Velex,et al.  Contribution of Gear Body to Tooth Deflections—A New Bidimensional Analytical Formula , 2004 .

[37]  D. C. H. Yang,et al.  A Rotary Model for Spur Gear Dynamics , 1985 .

[38]  T. F. Conry,et al.  The Effects of Surface Irregularities on the Elastohydrodynamic Lubrication of Sliding Line Contacts. Part I—Single Irregularities , 1984 .

[39]  D. Dowson,et al.  Elasto-Hydrodynamic Lubrication (International Series in Material, Science and Technology, Vol. 23) , 1978 .

[40]  Dennis P. Townsend,et al.  Elastohydrodynamic lubrication of a spinning ball in a nonconforming groove. , 1970 .