Modelling study of the low-pump-power demand constructal T-shaped pipe network for a large scale radiative cooled-cold storage system

Abstract To provide supplemental cooling to air cooled condenser (ACC) based thermo-electric power plants, radiative cooling is one of the options to ensure comparable efficiency as water cooled power plants. However, radiative cooling has relatively low energy intensity, about 100 W/m 2 cooling power on daily average. To work with power plants generally at few hundreds of megawatts, an intermediate system is needed to bridge this huge energy intensity mismatching at low energy cost. A low-pump-power demand pipe network is proposed to collect cold energy generated by the radiative cooling surfaces using water as the heat transfer fluid and the cold water is thus stored in intermediate storage devices. In this work, head loss and heat loss analysis models have been developed for the proposed constructal T-shaped network design, which provides convenience to integrate and scale up the radiative cooling modules to a large system to meet megawatt power plant’s supplemental cooling demand. A large radiative cooling system may consist of hundreds to thousand radiative cooled-cold (RadiCold) storage subsystems at a size of about 200-kW th each. Design of the 200-kW th RadiCold subsystem with constructal T-shaped network shows 11 kWh/day for pump electricity consumption and delivers cold energy of 4096 kW th /day.

[1]  A. Bejan,et al.  The constructal law and the thermodynamics of flow systems with configuration , 2004 .

[2]  Y. Azoumah,et al.  Optimal design of tree-shaped water distribution network using constructal approach: T-shaped and Y-shaped architectures optimization and comparison , 2012 .

[3]  Paul F. Boulos,et al.  Convergence of Newton method in nonlinear network analysis , 1995 .

[4]  C D Murray,et al.  The Physiological Principle of Minimum Work: I. The Vascular System and the Cost of Blood Volume. , 1926, Proceedings of the National Academy of Sciences of the United States of America.

[5]  Alibakhsh Kasaeian,et al.  Numerical simulation of combined solar passive heating and radiative cooling for a building , 2015 .

[6]  Adrian Bejan,et al.  Tree-shaped insulated designs for the uniform distribution of hot water over an area , 2001 .

[7]  Ahmet Z. Sahin,et al.  Maintaining uniform surface temperature along pipes by insulation , 2005 .

[8]  Adrian Bejan,et al.  Constructal tree-shaped flow structures , 2007 .

[9]  Adrian Bejan,et al.  Distributed energy storage: Time-dependent tree flow design , 2016 .

[10]  Michael Schlegel,et al.  Maximum Entropy Analysis of Hydraulic Pipe Flow Networks , 2016 .

[11]  Adrian Bejan,et al.  Design with constructal theory , 2008 .

[12]  Y. Azoumah,et al.  Optimization of drinking water distribution networks: Computer-based methods and constructal design , 2012, Comput. Environ. Urban Syst..

[13]  Elizaldo Domingues dos Santos,et al.  Constructal Design of Complex Assembly of Fins , 2011 .

[14]  Mohammad Reza Tavakoli,et al.  Design of bifurcating microchannels with/without loops for cooling of square-shaped electronic components , 2016 .

[15]  Antonio F. Miguel,et al.  Dendritic structures for fluid flow: Laminar, turbulent and constructal design , 2010 .

[16]  Argimiro Resende Secchi,et al.  Novel method for looped pipeline network resolution , 2017, Comput. Chem. Eng..

[17]  Alexandre K. da Silva,et al.  Experimental thermal–hydraulic evaluation of constructal microfluidic structures under fully constrained conditions , 2011 .

[18]  Khosrow Jafarpur,et al.  Thermal resistance in conductive constructal designs of arbitrary configuration: A new general approach , 2012 .

[19]  D'arcy W. Thompson.  On growth and form i , 1943 .

[20]  A. Bejan.  Shape and Structure, from Engineering to Nature , 2000 .

[21]  A. Bejan.  Constructal-theory network of conducting paths for cooling a heat generating volume , 1997 .

[22]  Dejan Brkić,et al.  Iterative Methods for Looped Network Pipeline Calculation , 2011 .

[23]  Adrian Bejan,et al.  Thermodynamic optimization of geometry: T- and Y-shaped constructs of fluid streams , 2000 .

[24]  Jerald D. Parker,et al.  Heating, Ventilating, and Air Conditioning: Analysis and Design , 1977 .