A New Criterion for Rupture Assessment of Rubber‐Like Materials under Mode‐I Crack Loading: The Effective Stretch Criterion

A new criterion is presented for fracture assessment of rubber-like materials weakened by a mode I crack. The criterion is based on two main assumptions: the existence of a damage zone around the crack tip and the dominant uniaxial nature of the stress field near the crack in rubber-like materials. Considering these key features and employing the concepts of well-known eight-chain model, first, a failure criterion called the “Effective Stretch Criterion” has been proposed. Then, a procedure has been elaborated to calibrate the material parameters in the criterion. The criterion, finally, has been validated by using two sets of experimental data available in the literature.

[1]  H. Stumpf,et al.  The singular elastostatic field due to a crack in rubberlike materials , 1993 .

[2]  M. Wang,et al.  Statistical Theory of Networks of Non‐Gaussian Flexible Chains , 1952 .

[3]  Serdar Göktepe,et al.  A micro-macro approach to rubber-like materials—Part I: the non-affine micro-sphere model of rubber elasticity , 2004 .

[4]  N. Aït Hocine,et al.  Experimental and numerical investigation on single specimen methods of determination of J in rubber materials , 1998 .

[5]  Hao-Yun Tan,et al.  Experimental analysis of crack tip fields in rubber materials under large deformation , 2012 .

[6]  François Hild,et al.  A critical local energy release rate criterion for fatigue fracture of elastomers , 2011 .

[7]  Cheng Bo Zhang,et al.  Experimental Analysis of the Damage Zone around Crack Tip for Rubberlike Materials under Mode-I Fracture Condition , 2013 .

[8]  F. S. Wong,et al.  Large plane deformations of thin elastic sheets of neo-Hookean material , 1969 .

[9]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[10]  Y. Gao,et al.  Large Strain Field Near a Crack Tip in a Rubber Sheet , 2001 .

[11]  Hubert M. James,et al.  Theory of the Elastic Properties of Rubber , 1943 .

[12]  G. Sih.  Strain-energy-density factor applied to mixed mode crack problems , 1974 .

[13]  M. Boyce,et al.  Constitutive models of rubber elasticity: A review , 2000 .

[14]  M. Ayatollahi,et al.  Mixed mode fracture analysis of polycrystalline graphite – A modified MTS criterion , 2008 .

[15]  M. Mooney.  A Theory of Large Elastic Deformation , 1940 .

[16]  Konstantin Y. Volokh,et al.  Cracks in rubber , 2008 .

[17]  L. Treloar,et al.  The elasticity of a network of long-chain molecules.—III , 1943 .

[18]  James K. Knowles,et al.  Finite-deformation analysis of the elastostatic field near the tip of a crack: Reconsideration and higher-order results , 1974 .

[19]  N. Aït Hocine,et al.  Fracture problems of rubbers: J-integral estimation based upon η factors and an investigation on the strain energy density distribution as a local criterion , 2002 .

[20]  R. Rivlin,et al.  Rupture of rubber. I. Characteristic energy for tearing , 1953 .

[21]  M. Boyce,et al.  A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials , 1993 .

[22]  Y. C. Gao,et al.  Elastostatic crack tip behavior for a rubber-like material , 1990 .

[23]  T. Y. Yang,et al.  Plane stress finite element prediction of mixed-mode rubber fracture and experimental verification , 1990 .

[24]  Chung-Yuen Hui,et al.  Finite strain analysis of crack tip fields in incompressible hyperelastic solids loaded in plane stress , 2011 .

[25]  K. Volokh.  Characteristic Length of Damage Localization in Rubber , 2011 .

[26]  Zhi Yu Wang.  Finite Strain Analysis of Crack Tip Fields in Yeoh-Model-Based Rubber-Like Materials which Are Loaded in Plane Stress , 2011 .

[27]  A. Fakhimi,et al.  Process zone and size effect in fracture testing of rock , 2013 .

[28]  D. Durban,et al.  The crack tip field in a rubber sheet , 1995 .

[29]  Martin Kroon,et al.  Asymptotic mechanical fields at the tip of a mode I crack in rubber-like solids , 2014 .

[30]  James K. Knowles,et al.  An asymptotic finite-deformation analysis of the elastostatic field near the tip of a crack , 1973 .

[31]  L. Treloar.  The photoelastic properties of short-chain molecular networks , 1954 .

[32]  E. Giessen,et al.  On Improved Network Models for Rubber Elasticity and Their Applications to Orientation Hardening in Glassy Polymers , 1993 .

[33]  P. Flory,et al.  Statistical Mechanics of Cross‐Linked Polymer Networks I. Rubberlike Elasticity , 1943 .

[34]  A. A. Griffith.  The Phenomena of Rupture and Flow in Solids , 1921 .

[35]  G. J. Lake.  Fatigue and Fracture of Elastomers , 1995 .

[36]  Liviu Marsavina,et al.  Tensile properties of semi-crystalline thermoplastic polymers: Effects of temperature and strain rates , 2013 .

[37]  Majid R. Ayatollahi,et al.  Fracture analysis of V-notched components – Effects of first non-singular stress term , 2011 .

[38]  Noureddine Benseddiq,et al.  Fracture of elastomers under static mixed mode: the strain-energy-density factor , 2007 .

[39]  Lallit Anand,et al.  A constitutive model for compressible elastomeric solids , 1996 .

[40]  Y. C. Gao,et al.  Large deformation field near a crack tip in rubber-like material , 1997 .

[41]  Z. Wang,et al.  Large strain field near a notch-tip under tension , 1997 .

[42]  Filippo Berto,et al.  A criterion based on the local strain energy density for the fracture assessment of cracked and V-notched components made of incompressible hyperelastic materials , 2015 .