Mechanical and electrical properties of PANI-based conductive thermosetting composites

Polyaniline (PANI) is one of the most studied intrinsic electrically conductive polymer in recent years. In the present work, PANI-based conductive composites have been prepared using dodecylbenzenesulphonic acid (DBSA) as a dopant and divinylbenzene (DVB) as a cross-linking polymer to enhance the rigidity. In this mixture, DBSA acts as the dopant of PANI as well as the curing agent of DVB, and this means that doping and curing of the composite occur simultaneously. PANI–DBSA mixture has been prepared by physical mixing using centrifugal mixer. The ratio of PANI and DBSA has been kept constant in weight ratio 30:70. Furthermore, DVB content has been varied to prepare the different samples. It has been found that with the increase in DVB content, a good dispersion of PANI–DBSA/DVB solution is achieved. However, significant improvement in the electrical conductivity of the samples is observed with the increase in PANI content. Mechanical flexural test has been performed on the prepared samples using a three-point bending configuration. It has been found that the flexural modulus and brittleness of the prepared samples increase with the increase in the content of DVB in the composite. Morphology of the composite surfaces has been also studied and it has been found that low concentration of DVB results into a poor dispersion and hence agglomeration of PANI–DBSA in composite can be seen clearly in the images.