Observation of particle ejection behavior following laser-induced breakdown on the rear surface of a sodium chloride optical window

Abstract. Laser-induced rear surface breakdown process of sodium chloride (NaCl) optical window was investigated based on the time-resolved shadowgraphy and interferometry. Violent particle ejection behavior lasting from tens of nanoseconds to tens of microseconds after the breakdown was observed. Classified by the particle velocity and propagating direction, the ejection process can be divided into three phases: (1) high-speed ejection of liquid particles during the first 100-ns delay; (2) micron-sized material clusters ejection from ∼100-ns to ∼1-μs delay; (3) larger and slower solid-state particles ejection from ∼1  μs to tens of microseconds delay. The moving directions of particles in the first and third phases are both perpendicular to the sample surface while particles ejected in the second phase exhibits angular ejection and present a V-like particle pattern. Mechanisms include explosive boiling, impact ejection, and shockwave ejection are discussed to explain this multiple phase ejection behavior. Our results highlight the significance of impact ejection induced by recoil pressure and backward propagating internal shockwave for laser-induced rear surface breakdown events of optical materials with low melting point.

[1]  Peter Berger,et al.  Time-resolved observation of gas-dynamic discontinuities arising during excimer laser ablation and their interpretation , 1995 .

[2]  Cristian Porneala,et al.  Time-resolved dynamics of nanosecond laser-induced phase explosion , 2009 .

[3]  P. Miller,et al.  Fracture-induced subbandgap absorption as a precursor to optical damage on fused silica surfaces. , 2010, Optics letters.

[4]  Expansion of the laser ablation vapor plume into a background gas: Part A, Analysis , 2006 .

[5]  Haofeng Hu,et al.  Neutrals ejection in intense femtosecond laser ablation. , 2011, Optics letters.

[6]  Leonid V. Zhigilei,et al.  Dynamics of the plume formation and parameters of the ejected clusters in short-pulse laser ablation , 2003 .

[7]  A. Matsunawa,et al.  The role of recoil pressure in energy balance during laser materials processing , 1997 .

[8]  R. Negres,et al.  Dynamics of the plume containing nanometric-sized particles ejected into the atmospheric air following laser-induced breakdown on the exit surface of a CaF2 optical window , 2014 .

[9]  Shenglin Jiang,et al.  Molecular dynamics simulation of shock induced ejection on fused silica surface , 2014 .

[10]  T. Glover,et al.  Hydrodynamics of particle formation following femtosecond laser ablation , 2003 .

[11]  S. Mao,et al.  Delayed phase explosion during high-power nanosecond laser ablation of silicon , 2002 .

[12]  Masaaki Sakakura,et al.  Transient Stress Imaging after Irradiation with a Focused Femtosecond Laser Pulse inside a Single Crystal , 2012 .

[13]  Alfred Vogel,et al.  Material ejection in nanosecond Er:YAG laser ablation of water, liver, and skin , 2005 .

[14]  Stavros G. Demos,et al.  Time-resolved microscope system to image material response following localized laser energy deposition: exit surface damage in fused silica as a case example , 2010 .

[15]  Tayyab I. Suratwala,et al.  Metallic-like photoluminescence and absorption in fused silica surface flaws , 2009 .

[16]  Leonid V. Zhigilei,et al.  Mechanisms of laser ablation from molecular dynamics simulations: dependence on the initial temperature and pulse duration , 1999 .

[17]  D. Geohegan,et al.  Nanoparticle generation and transport resulting from femtosecond laser ablation of ultrathin metal films: Time-resolved measurements and molecular dynamics simulations , 2014 .

[18]  C. Lim,et al.  Interferometric investigation of the influence of argon buffer gas on the characteristics of laser-induced aluminum plasmas. , 2014, Applied optics.

[19]  J Bude,et al.  High fluence laser damage precursors and their mitigation in fused silica. , 2014, Optics express.

[20]  Efficiency of various mechanisms of the laser damage in transparent solids , 2002 .

[21]  Dai Yifan,et al.  Time-resolved imaging of filamentary damage on the exit surface of fused silica induced by 1064 nm nanosecond laser pulse , 2015 .

[22]  Saulius Juodkazis,et al.  Time-resolved interferometry of femtosecond-laser-induced processes under tight focusing and close-to-optical breakdown inside borosilicate glass. , 2011, Optics express.

[23]  J. Ramos-Barrado,et al.  Micro- and nanoparticle generation during nanosecond laser ablation: correlation between mass and optical emissions. , 2014, Optics express.

[24]  Chunyi Liu.  A study of particle generation during laser ablation with applications , 2005 .

[25]  C. Lim,et al.  Interferometric Analysis of 1064-nm Nanosecond Laser Induced Copper Plasma , 2014, IEEE Transactions on Plasma Science.

[26]  A. Vogel,et al.  Mechanisms of pulsed laser ablation of biological tissues. , 2003, Chemical reviews.

[27]  Alberto Salleo,et al.  Energy deposition at front and rear surfaces during picosecond laser interaction with fused silica , 2001 .

[28]  N. Zhang,et al.  Time-resolved shadowgraphs of material ejection in intense femtosecond laser ablation of aluminum. , 2007, Physical review letters.

[29]  Andrew G. Glen,et al.  APPL , 2001 .

[30]  Cristian Porneala,et al.  Observation of nanosecond laser-induced phase explosion in aluminum , 2006 .

[31]  J. D. Bude,et al.  Laser-supported solid-state absorption fronts in silica , 2010 .

[32]  S. Mao,et al.  Initiation of an early-stage plasma during picosecond laser ablation of solids , 2000 .

[33]  Hassan Akhouayri,et al.  Catastrophic nanosecond laser induced damage in the bulk of potassium titanyl phosphate crystals , 2014 .

[34]  Stavros G. Demos,et al.  Material response during nanosecond laser induced breakdown inside of the exit surface of fused silica , 2013 .

[35]  R. Russo,et al.  Evidence for phase-explosion and generation of large particles during high power nanosecond laser ablation of silicon , 2000 .

[36]  Stavros G. Demos,et al.  Kinetics of ejected particles during breakdown in fused silica by nanosecond laser pulses , 2011 .

[37]  R. Russo,et al.  Expansion of the laser ablation vapor plume into a background gas. I. Analysis , 2007 .

[38]  M. Feit,et al.  Characterization of ejected fused silica particles following surface breakdown with nanosecond pulses. , 2012, Optics express.

[39]  M. F. Koldunov,et al.  Thermoelastic and ablation mechanisms of laser damage to the surfaces of transparent solids , 1998 .

[40]  Xun Gao,et al.  Characteristics of plasma plume expansion from Al target induced by oblique incidence of 1064 and 355 nm nanosecond Nd : YAG laser , 2013 .

[41]  Stavros G. Demos,et al.  Relaxation dynamics of nanosecond laser superheated material in dielectrics , 2015 .

[42]  Shyam L. Gupta,et al.  Optical probe investigation of laser ablated carbon plasma plume in nitrogen ambient , 2013 .

[43]  Michael D. Feit,et al.  Comparison of material response in fused silica and KDP following exit surface laser- induced breakdown , 2013, Laser Damage.

[44]  J. Ramos-Barrado,et al.  Particle formation and plasma radiative losses during laser ablation suitability of the Sedov-Taylor scaling. , 2014, Optics express.

[45]  Stavros G. Demos,et al.  Role of phase instabilities in the early response of bulk fused silica during laser-induced breakdown , 2011 .

[46]  S G Demos,et al.  Localized dynamics during laser-induced damage in optical materials. , 2004, Physical review letters.