On the finite element modelling of balloon-expandable stents.

Finite element method (FEM) has been extensively applied in the analyses of mechanical and biomechanical properties of stents. Geometrically, a closed-cell stent is an assembly of a number of repeated unit cells and exhibits periodicity in both longitudinal and circumferential directions. The objective of this paper is to study the FEM models for the analysis of stents. To this end, three models, termed respectively as the Panel, RUC (repeated unit cell) and RUC(+) (repeated unit cell with a free end) models, are proposed incorporating rotationally symmetrical, periodic and free edge conditions. The proposed models are applied to the analysis of stents of Palmaz-Schatz and sinusoidal types. The Panel model reduces the size of the numerical model from the full, half or quarter stent to a strip of it without losing the computational accuracy. The RUC model gives satisfactory results for the inner part of the stent except for the two ends. The RUC(+) model, described here for the first time, provides accurate results for both the inner part and the distal ends of the stent. In addition, it allows the prediction of the well-known phenomenon of "dog-boning", in which the balloon is excessively expanded at the two ends of the stent.

[1]  D. Stoeckel,et al.  A survey of stent designs , 2002, Minimally invasive therapy & allied technologies : MITAT : official journal of the Society for Minimally Invasive Therapy.

[2]  Zihui Xia,et al.  A general finite element analysis method for balloon expandable stents based on repeated unit cell (RUC) model , 2007 .

[3]  Peter E. McHugh,et al.  Analysis of the mechanical performance of a cardiovascular stent design based on micromechanical modelling , 2004 .

[4]  Zbigniew Paszenda,et al.  Experimental and numerical biomechanical analysis of vascular stent , 2005 .

[5]  Weiqiang Wang,et al.  Analysis of the transient expansion behavior and design optimization of coronary stents by finite element method. , 2006, Journal of biomechanics.

[6]  Xinwei Wang,et al.  On selection of repeated unit cell model and application of unified periodic boundary conditions in micro-mechanical analysis of composites , 2006 .

[7]  F. D. Whitcher,et al.  Simulation of in vivo loading conditions of nitinol vascular stent structures , 1997 .

[8]  S. Chua,et al.  Finite element simulation of slotted tube (stent) with the presence of plaque and artery by balloon expansion , 2004 .

[9]  E. Edelman,et al.  Balloon-artery interactions during stent placement: a finite element analysis approach to pressure, compliance, and stent design as contributors to vascular injury. , 1999, Circulation research.

[10]  S. Chua,et al.  Finite-element simulation of stent expansion , 2002 .

[11]  F. Etave,et al.  Mechanical properties of coronary stents determined by using finite element analysis. , 2001, Journal of biomechanics.

[12]  P. Prendergast,et al.  Cardiovascular stent design and vessel stresses: a finite element analysis. , 2005, Journal of biomechanics.

[13]  S. Chua,et al.  Finite element simulation of stent and balloon interaction , 2003 .

[14]  C Dumoulin,et al.  Mechanical behaviour modelling of balloon-expandable stents. , 2000, Journal of biomechanics.

[15]  Marcin Kaczmarek,et al.  Biomechanical analysis of stent–oesophagus system , 2005 .

[16]  S. Chua,et al.  Effects of varying slotted tube (stent) geometry on its expansion behaviour using finite element method , 2004 .

[17]  Lorenza Petrini,et al.  A predictive study of the mechanical behaviour of coronary stents by computer modelling. , 2005, Medical engineering & physics.