Thermal behavior optimization in multi-MW wind power converter by reactive power circulation

In the paper, an actively controlled reactive power influence to the thermal behavior of multi-MW wind power converter with Doubly-Fed Induction Generator (DFIG) is investigated. The allowable range of internal reactive power circulation is firstly mapped depending on the DC-link voltage as well as the induction generator and power device capacity. Then the effects of reactive power circulation towards current characteristic and thermal distribution of the two-level back-to-back power converter is analyzed and compared. Finally the thermal-oriented reactive power is introduced to the system in the conditions of constant wind speed and during wind gust. It is concluded that the thermal performance will be improved by injecting proper reactive power circulation in the wind turbine system and thereby be able to reduce the thermal cycling and enhance the reliability.

[1]  Lixiang Wei,et al.  Analysis of PWM Frequency Control to Improve the Lifetime of PWM Inverter , 2011, IEEE Transactions on Industry Applications.

[2]  W. Hofmann,et al.  Investigation of thermal stress in the rotor of Doubly-Fed Induction Generators at synchronous operating point , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[3]  L. Dupont,et al.  Temperature Measurement of Power Semiconductor Devices by Thermo-Sensitive Electrical Parameters—A Review , 2012, IEEE Transactions on Power Electronics.

[4]  F. Blaabjerg,et al.  Power electronics as efficient interface in dispersed power generation systems , 2004, IEEE Transactions on Power Electronics.

[5]  P. Rodriguez,et al.  Power Capability Investigation Based on Electrothermal Models of Press-Pack IGBT Three-Level NPC and ANPC VSCs for Multimegawatt Wind Turbines , 2012, IEEE Transactions on Power Electronics.

[6]  Frede Blaabjerg,et al.  An overview of the reliability prediction related aspects of high power IGBTs in wind power applications , 2011, Microelectron. Reliab..

[7]  Frede Blaabjerg,et al.  Design for reliability of power electronic systems , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[8]  T. Ueta,et al.  A Fast Loss and Temperature Simulation Method for Power Converters, Part I: Electrothermal Modeling and Validation , 2012, IEEE Transactions on Power Electronics.

[9]  Wilfried Hofmann,et al.  Reactive Power Control Design in Doubly Fed Induction Generators for Wind Turbines , 2009, IEEE Transactions on Industrial Electronics.

[10]  Bin Lu,et al.  A Literature Review of IGBT Fault Diagnostic and Protection Methods for Power Inverters , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[11]  Wenyuan Li,et al.  Effect of Wind Speed on Wind Turbine Power Converter Reliability , 2012, IEEE Transactions on Energy Conversion.

[12]  Marco Liserre,et al.  Overview of Multi-MW Wind Turbines and Wind Parks , 2011, IEEE Transactions on Industrial Electronics.

[13]  R.W. De Doncker,et al.  Reliability Prediction for Inverters in Hybrid Electrical Vehicles , 2006, IEEE Transactions on Power Electronics.

[14]  Yantao Song,et al.  Survey on Reliability of Power Electronic Systems , 2013, IEEE Transactions on Power Electronics.

[15]  Zhe Chen,et al.  A Review of the State of the Art of Power Electronics for Wind Turbines , 2009, IEEE Transactions on Power Electronics.

[16]  Mahera Musallam,et al.  Impact of different control schemes on the life consumption of power electronic modules for variable speed wind turbines , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[17]  Frede Blaabjerg,et al.  Thermal analysis of multi-MW two-level wind power converter , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[18]  R. W. De Doncker,et al.  Reliability Prediction for Inverters in Hybrid Electrical Vehicles , 2007 .