Evaluation of vertical and horizontal bearing capacities of bucket foundations in clay

Abstract The present paper presents the results of three-dimensional finite element analyses of bucket foundations in normally consolidated uniform clay under undrained conditions. The stress–strain response of clay was simulated using the Tresca criterion. The bearing capacities were calculated and found to be largely dependent on the aspect ratio of the bucket foundation. Based on the results of the analyses, new equations were proposed for calculating vertical and horizontal bearing capacities. In the proposed equations, the vertical capacity consisted of an end-bearing resistance and a skin friction resistance, whereas the horizontal capacity consisted of a normal resistance, a radial shear resistance, and a base shear resistance. Comparison of the numerical results showed that the proposed equations properly predicted the capacities of the bucket foundations in uniform or non-uniform clays.

[1]  George Eason,et al.  The plastic indentation of a semi-infinite solid by a perfectly rough circular punch , 1960 .

[2]  T. R. Chari,et al.  Lateral capacity of model rigid piles in cohesionless soils. , 1999 .

[3]  Mark Cassidy,et al.  Investigating the response of offshore foundations in soft clay soils , 2002 .

[4]  Susan Gourvenec,et al.  Effect of strength non-homogeneity on the shape of failure envelopes for combined loading of strip and circular foundations on clay , 2003 .

[5]  Beena Sukumaran,et al.  Efficient finite element techniques for limit analysis of suction caissons under lateral loads , 1999 .

[6]  Mark Randolph,et al.  THE EFFECT OF EMBEDMENT DEPTH ON THE UNDRAINED RESPONSE OF SKIRTED FOUNDATIONS TO COMBINED LOADING , 1999 .

[7]  S. Bang,et al.  Ultimate Horizontal Loading Capacity of Suction Piles , 2002 .

[8]  Mark Randolph,et al.  Shallow foundations subject to combined loadings , 1997 .

[9]  S. Gourvenec.  Effect of embedment on the undrained capacity of shallow foundations under general loading , 2008 .

[10]  Guy T. Houlsby,et al.  Calculation of Stresses on Shallow Penetrometers and Footings , 1984 .

[11]  Roy E. Olson,et al.  Components of suction caisson capacity measured in axial pullout tests , 2005 .

[12]  H. Abdul Razak,et al.  Finite element modeling of suction anchors under combined loading , 2009 .

[13]  Mark Fraser Bransby,et al.  The undrained capacity of skirted strip foundations under combined loading , 2009 .

[14]  Charles I. Mansur,et al.  Pile Tests, Low-Sill Structure, Old River, Louisiana , 1958 .

[15]  Mark Randolph,et al.  Installation and pull-out capacity of stiffened suction caissons in cohesive sediments , 2001 .

[16]  T. I. Tjelta,et al.  Novel Foundation Concept for a Jacket Finding Its Place , 1993 .

[17]  Mark Fraser Bransby,et al.  THE UNDRAINED VERTICAL BEARING CAPACITY OF SKIRTED FOUNDATIONS , 2007 .

[19]  John P. Carter,et al.  Numerical studies of the bearing capacity of shallow foundations on cohesive soil subjected to combined loading , 2000 .

[20]  Byron W. Byrne,et al.  Model testing of suction caissons in clay subjected to vertical loading , 2010 .

[21]  Rodrigo Salgado,et al.  Two- and three-dimensional bearing capacity of foundations in clay , 2004 .

[22]  Mark Randolph,et al.  Combined loading of skirted foundations , 1998 .

[23]  Gijae Yun,et al.  The horizontal-moment capacity of embedded foundations in undrained soil , 2007 .

[24]  Kazuo Tani,et al.  BEARING CAPACITY OF CIRCULAR FOUNDATIONS ON SOFT CLAY OF STRENGTH INCREASING WITH DEPTH , 1995 .

[25]  Alec Westley Skempton,et al.  The bearing capacity of clays , 1951 .

[26]  A. Ghahramani,et al.  Experimental Study of Bearing Capacity of Granular Soils, Reinforced with Innovative Grid-Anchor System , 2008 .

[27]  J. Brinch Hansen.  AKADEMIET FOR DE TEKNISKE VIDENSKABER , 2008 .

[28]  George Geoffrey Meyerhof,et al.  Some recent research on the bearing capacity of foundations , 1963 .