论文信息 - Prediction of Dynamic Cutting Coefficients from Steady-State Cutting Data

Prediction of Dynamic Cutting Coefficients from Steady-State Cutting Data

An analytical method is presented with which the dynamic cutting coefficients can be derived from steady state cutting data. The technique is used for predicting the experimental results of previous investigators, covering wave cutting and removing tests as well as two actual stability charts, and good correspondence is noted.

M. M. Sadek | S. A. Tobias | M. M. Nigm

[1] W. A. Knight,et al. Application of the universal machinability chart to the prediction of machine tool stability , 1968 .

[2] M. M. Sadek. Stability of centre lathes in orthogonal cutting , 1974 .

[3] W. A. Knight,et al. Chatter in turning: Some effects of tool geometry and cutting conditions , 1972 .

[4] C. Rubenstein,et al. An experimental investigation of the dynamic cutting of steel , 1973 .

[5] M. M. Sadek,et al. The Reliability of the C.I.R.P. Calibrating Rig for Testing Machine Tools , 1973 .

[6] S. A. Tobias,et al. The dynamic cutting of metals , 1961 .

[7] C. Andrew,et al. Machining Forces: Some Effects of Removing a Wavy Surface , 1966 .

[8] C. Andrew,et al. Machining Forces: Some Effects of Tool Vibration: , 1965 .

[9] R. Connolly,et al. The mechanics of continuous chip formation in orthogonal cutting , 1968 .

[10] M. M. Sadek,et al. Comparative Dynamic Acceptance Tests for Machine Tools Applied to Horizontal Milling Machines , 1970 .

[11] W. A. Knight,et al. Some observations on the vibratory metal cutting process employing high speed photography , 1970 .

[12] W. A. Knight,et al. TORSIONAL VIBRATIONS AND MACHINE-TOOL STABILITY , 1970 .

[13] S. A. Tobias,et al. The relation between the static and the dynamic cutting of metals , 1967 .

[14] N. Zorev. Metal cutting mechanics , 1966 .