Investigations on dimensional accuracy of the components prepared by hybrid investment casting

Abstract The rapid prototyping technologies (RP) are very useful when a limited number of pieces are promptly required like: in making/testing prototypes, design iterations and design optimisations. The fused deposition modelling (FDM) is one of the RP technologies that can use thermoplastic for making sacrificial patterns used in investment casting (IC) applications. Investment casting, often known as precision casting process, is used to produce parts with controlled dimensional tolerances. In the present study, dimensional accuracy of hip joints prepared with FDM assisted IC process has been optimised using a design of experiments technique. The effect of process parameters on FDM assisted IC process has been evaluated and studied using ANOVA. The results of the present study indicated that hip joint castings are acceptable as per the international tolerance grades.

[1]  Christopher B. Williams,et al.  A Functional Classification Framework for the Conceptual Design of Additive Manufacturing Technologies , 2011 .

[2]  B. J. Alvarez,et al.  Dimensional accuracy improvement of FDM square cross-section parts using artificial neural networks and an optimization algorithm , 2013 .

[3]  M. Macků,et al.  Applying RP-FDM Technology to Produce Prototype Castings Using the Investment Casting Method , 2012 .

[4]  Luigi Maria Galantucci,et al.  Direct Digital Manufacturing of ABS parts: an Experimental Study on Effectiveness of Proprietary Software for Shrinkage Compensation , 2012 .

[5]  M. Greul,et al.  Rapid prototyping of functional metallic parts , 1995 .

[6]  Simranpreet Singh Gill,et al.  Efficacy of powder-based three-dimensional printing (3DP) technologies for rapid casting of light alloys , 2011 .

[7]  Neri Volpato,et al.  The influence of support base on FDM accuracy in Z , 2014 .

[8]  Pio G. Iovenitti,et al.  Part Build Orientations Based on Volumetric Error in Fused Deposition Modelling , 2000 .

[9]  Steve Upcraft,et al.  The rapid prototyping technologies , 2003 .

[10]  Chee Kai Chua,et al.  Rapid investment casting: direct and indirect approaches via model maker II , 2005 .

[11]  William N. Sharpe,et al.  Evaluation of a modified monotonic Neuber relation , 1991 .

[12]  Qiao Sun,et al.  Composite Modeling and Analysis for Fabrication of FDM Prototypes with Locally Controlled Properties , 2002 .

[13]  Inderpreet Singh Ahuja,et al.  Application of fusion deposition modelling for rapid investment casting – a review , 2012 .

[14]  Jingyan Dong,et al.  Hybrid hierarchical fabrication of three-dimensional scaffolds , 2014 .

[15]  Seok-Hee Lee,et al.  Representation of surface roughness in fused deposition modeling , 2009 .

[16]  S. Jayanthi,et al.  Accuracy Improvement in Rapid Prototyping Machine (FDM-1650) , 2001 .

[17]  Luigi Maria Galantucci,et al.  Validation Study of an Analytical Model of FDM Accuracy , 2011 .

[18]  Chee Kai Chua,et al.  Rapid prototyping and tooling techniques: a review of applications for rapid investment casting , 2005 .

[19]  Alberto Boschetto,et al.  Accuracy prediction in fused deposition modeling , 2014 .

[20]  Srinivasa Prakash Regalla,et al.  Multi-objective optimisation of strength and volumetric shrinkage of FDM parts , 2014 .

[21]  Sadegh Rahmati,et al.  Dimensional accuracy analysis of wax patterns created by RTV silicone rubber molding using the Taguchi approach , 2007 .

[22]  Mohd Rizal Alkahari,et al.  Analysis on fused deposition modelling performance , 2010 .

[23]  Chua Chee Kai,et al.  Integrating rapid prototyping and tooling with vacuum casting for connectors , 1998 .

[24]  A. K. Sood,et al.  Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method , 2009 .

[25]  Hua Guo,et al.  Research on the Impacting Factors of Dimensional Accuracy with Silicone Mold Casting Products Based on FDM , 2014 .

[26]  Rupinder Singh,et al.  Investigations for Dimensional Accuracy of Investment Casting Process after Cycle Time Reduction by Advancements in Shell Moulding , 2014 .

[27]  Rupinder Singh,et al.  Wear modelling of Al-Al2O3 functionally graded material prepared by FDM assisted investment castings using dimensionless analysis , 2015 .

[28]  Akhil Garg,et al.  A Fuzzy-Taguchi Approach for Improving Dimensional Accuracy of Fused Deposition Modelling (FDM) Built Parts , 2010 .

[29]  Rupinder Singh,et al.  Process capability study of polyjet printing for plastic components , 2011 .

[30]  Wan Sharuzi Wan Harun,et al.  Evaluation of ABS patterns produced from FDM for investment casting process , 2009 .

[31]  A. Farzadi,et al.  Effect of layer printing delay on mechanical properties and dimensional accuracy of 3D printed porous prototypes in bone tissue engineering , 2015 .

[32]  Sanjay B. Joshi,et al.  Error compensation for fused deposition modeling (FDM) machine by correcting slice files , 2008 .