论文信息 - Cutting performance of nanocomposite Cr–C–N, Cr–Si–N and Cr–Si–C–N coated tools for micro end-milling operation - 字舞流文

Cutting performance of nanocomposite Cr–C–N, Cr–Si–N and Cr–Si–C–N coated tools for micro end-milling operation

T. Je | Hyun-Seok Tak | Maengsuk Kim | I. Park | M. Kang | Kun-Il Kim

[1] K. Kim,et al. Cutting performance using high reliable device of Ti–Si–N-coated cutting tool for high-speed interrupted machining , 2005 .

[2] F. Lévy,et al. Structural and mechanical properties of sputtered cubic and hexagonal NbNx thin films , 2004 .

[3] P. Panjan,et al. Properties of Cr(C,N) hard coatings deposited in ArC2H2N2 plasma , 2003 .

[4] Mi-Hye Lee,et al. Effects of Si addition on the microstructural evolution and hardness of Ti–Al–Si–N films prepared by the hybrid system of arc ion plating and sputtering techniques , 2003 .

[5] Yun-han Ling,et al. Corrosion resistance of duplex and gradient CrNx coated H13 steel , 2003 .

[6] A. Hashimoto,et al. Oxidation resistance of Cr1-XAlXN and Ti1-XAlXN films , 2003 .

[7] A. Kromka,et al. Diamond film coated on WC/Co tools by double bias-assisted hot filament CVD , 2002 .

[8] I. Milošev,et al. Industrial applications of CrN (PVD) coatings, deposited at high and low temperatures , 1997 .

[9] P. Panjan,et al. Novel applications of CrN (PVD) coatings deposited at 200 °C , 1995 .

[10] Y. Jeong,et al. Tool life of nanocomposite Ti–Al–Si–N coated end-mill by hybrid coating system in high speed machining of hardened AISI D2 steel , 2009 .