Roll to roll compatible fabrication of inverted organic solar cells with a self-organized charge selective cathode interfacial layer

We successfully demonstrate a simple approach to printing efficient, inverted organic solar cells (OSCs) with a self-organized charge selective cathode interface layer based on the small-molecule Phen-NaDPO. Different from previous studies, Phen-NaDPO molecules were blended into a polymer/fullerene blend, comprising a low bandgap diketopyrrolopyrrole–quinquethiophene alternating copolymer pDPP5T-2 and phenyl-C61-butyric acid methyl ester (PC61BM), and processed by doctor blading in air. We observed a spontaneous, surface energy driven migration of Phen-NaDPO towards the ZnO interface and a subsequent formation of electron selective and barrier free extraction contacts. In the presence of 0.5 wt% Phen-NaDPO, a PCE of 5.4% was achieved for the inverted device based on an ITO/ZnO cathode. Notably, the photovoltaic performances remained at the same level with increasing the Phen-NaDPO concentration in the active layer from 0.25 to 1 wt%. Furthermore, this approach could be proven to effectively work with other cathodes such as bare ITO and ITO/AZO. The self-organization of Phen-NaDPO through spontaneous vertical phase separation is mainly attributed to its high surface energy and strong interaction with the cathode material. The present results highlight that a self-organized cathode interfacial material processed from a “ternary” active layer is fully compatible with the requirements for roll-to-roll fabrication of inverted organic solar cells.

[1]  C. Brabec,et al.  A solution-processed barium hydroxide modified aluminum doped zinc oxide layer for highly efficient inverted organic solar cells , 2014 .

[2]  Jack F. Douglas,et al.  The Critical Role of Solvent Evaporation on the Roughness of Spin-Cast Polymer Films , 2001 .

[3]  Mikkel Jørgensen,et al.  Fabrication of Polymer Solar Cells Using Aqueous Processing for All Layers Including the Metal Back Electrode , 2011 .

[4]  Steven Abbott,et al.  Determination of the P3HT:PCBM solubility parameters via a binary solvent gradient method: Impact of solubility on the photovoltaic performance , 2012 .

[5]  Talha M. Khan,et al.  A Universal Method to Produce Low–Work Function Electrodes for Organic Electronics , 2012, Science.

[6]  Z. Deng,et al.  Efficient polymer solar cells with polyethylene glycol cathode buffer layer and improved PEDOT:PSS conductivity , 2015 .

[7]  D. Qin,et al.  Electron-transporting third component modifying cathode for simplified inverted ternary blend solar cells , 2016 .

[8]  F. Krebs,et al.  A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies , 2009 .

[9]  Alex K.-Y. Jen,et al.  Polymer Solar Cells That Use Self‐Assembled‐Monolayer‐ Modified ZnO/Metals as Cathodes , 2008 .

[10]  Menglan Lv,et al.  Self-organization of amine-based cathode interfacial materials in inverted polymer solar cells. , 2014, ACS nano.

[11]  M. Halik,et al.  Morphology analysis of near IR sensitized polymer/fullerene organic solar cells by implementing low bandgap heteroanalogue C-/Si-PCPDTBT , 2014 .

[12]  Martin A. Green,et al.  Solar cell efficiency tables (version 46) , 2015 .

[13]  N. S. Sariciftci,et al.  Conjugated polymer-based organic solar cells. , 2007, Chemical reviews.

[14]  Kazuhito Hashimoto,et al.  Self‐Organized Buffer Layers in Organic Solar Cells , 2008 .

[15]  Yang Yang,et al.  A polymer tandem solar cell with 10.6% power conversion efficiency , 2013, Nature Communications.

[16]  Chain‐Shu Hsu,et al.  Self-Assembled Poly(ethylene glycol) Buffer Layers in Polymer Solar Cells: Toward Superior Stability and Efficiency , 2012 .

[17]  Frank W. Fecher,et al.  Guidelines for Closing the Efficiency Gap between Hero Solar Cells and Roll‐To‐Roll Printed Modules , 2015 .

[18]  T. Anthopoulos,et al.  An Air-Stable DPP-thieno-TTF Copolymer for Single-Material Solar Cell Devices and Field Effect Transistors. , 2015, ACS applied materials & interfaces.

[19]  Valentin D. Mihailetchi,et al.  Device Physics of Polymer:Fullerene Bulk Heterojunction Solar Cells , 2007 .

[20]  Christoph J. Brabec,et al.  Organic photovoltaics: technology and market , 2004 .

[21]  Ping Chen,et al.  Lending Triarylphosphine Oxide to Phenanthroline: a Facile Approach to High‐Performance Organic Small‐Molecule Cathode Interfacial Material for Organic Photovoltaics utilizing Air‐Stable Cathodes , 2014 .

[22]  Miao Xu,et al.  Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure , 2012, Nature Photonics.

[23]  Mikkel Jørgensen,et al.  High‐Volume Processed, ITO‐Free Superstrates and Substrates for Roll‐to‐Roll Development of Organic Electronics , 2014, Advanced science.

[24]  C. Bailly,et al.  Localization of carbon nanotubes at the interface in blends of polyamide and ethylene-acrylate copolymer , 2010 .

[25]  Kilho Yu,et al.  Simplified Tandem Polymer Solar Cells with an Ideal Self‐Organized Recombination Layer , 2015, Advanced materials.

[26]  Christoph J. Brabec,et al.  Interface materials for organic solar cells , 2010 .

[27]  Shijun Jia,et al.  Polymer–Fullerene Bulk‐Heterojunction Solar Cells , 2009, Advanced materials.

[28]  Christoph J. Brabec,et al.  Highly efficient organic tandem solar cells: a follow up review , 2013 .

[29]  D. K. Owens,et al.  Estimation of the surface free energy of polymers , 1969 .

[30]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[31]  Yongfang Li,et al.  Single‐Junction Polymer Solar Cells Exceeding 10% Power Conversion Efficiency , 2015, Advanced materials.

[32]  Shigeo Asai,et al.  Dispersion of fillers and the electrical conductivity of polymer blends filled with carbon black , 1991 .

[33]  Christoph J. Brabec,et al.  Nanowire Interconnects for Printed Large‐Area Semitransparent Organic Photovoltaic Modules , 2015 .

[34]  C. Brabec,et al.  Plastic Solar Cells , 2001 .

[35]  Gang Li,et al.  For the Bright Future—Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4% , 2010, Advanced materials.

[36]  M. Halik,et al.  Overcoming interface losses in organic solar cells by applying low temperature, solution processed aluminum-doped zinc oxide electron extraction layers , 2013 .

[37]  Yiwang Chen,et al.  Self-Organized Hole Transport Layers Based on Polythiophene Diblock Copolymers for Inverted Organic Solar Cells with High Efficiency , 2013 .