Experimental investigation of underwater laser beam micromachining (UW-LBμM) on 304 stainless steel

[1]  Bijoy Bhattacharyya,et al.  Generation of microfeatures on stainless steel by electrochemical micromachining , 2015 .

[2]  S. Park,et al.  Micromachining of stainless steel–polymer composites using nanosecond and femtosecond UV lasers , 2014 .

[3]  Janakarajan Ramkumar,et al.  Simulations and experiments on excimer laser micromachining of metal and polymer , 2014 .

[4]  C. Fanara,et al.  Underwater-laser drilling of aluminum , 2013 .

[5]  S. Mitra,et al.  An experimental investigation on Nd:YAG laser microchanneling on polymethyl methacrylate submerged in water , 2013 .

[6]  Lin Li,et al.  Underwater femtosecond laser micromachining of thin nitinol tubes for medical coronary stent manufacture , 2012 .

[7]  Wei Wang,et al.  CO2 laser underwater machining of deep cavities in alumina , 2011 .

[8]  A. Nath,et al.  Temperature and intensity dependence of Yb-fiber laser light absorption in water. , 2011, Applied optics.

[9]  G. Lim,et al.  Solvent‐Assisted Laser Drilling of Silicon Carbide , 2011 .

[10]  E. Lam,et al.  Liquid-immersion laser micromachining of GaN grown on sapphire , 2011 .

[11]  David Whitehead,et al.  Comparison of dry and wet fibre laser profile cutting of thin 316L stainless steel tubes for medical device applications , 2010 .

[12]  C. Chung,et al.  CO2 laser micromachined crackless through holes of Pyrex 7740 glass , 2010 .

[13]  C. Leone,et al.  AISI 304 stainless steel marking by a Q-switched diode pumped Nd:YAG laser , 2010 .

[14]  A. Nath,et al.  A study on laser drilling of thin steel sheet in air and underwater , 2010 .

[15]  Sungho Jeong,et al.  Application of etchant jet for laser micromachining of metal channels , 2009 .

[16]  P. R. Miller,et al.  Laser micromachining for biomedical applications , 2009 .

[17]  E. Kannatey-Asibu.  Principles of Laser Materials Processing , 2009 .

[18]  N. Mansour,et al.  Nanosecond pulsed laser ablation of silicon in liquids , 2009 .

[19]  Jussi A. Karjalainen,et al.  Cutting thin sheet metal with a water jet guided laser using various cutting distances, feed speeds and angles of incidence , 2007 .

[20]  Graham Rutterford,et al.  Micro-machining of metals, ceramics and polymers using nanosecond lasers , 2007 .

[21]  Lin Li,et al.  Effect of beam angle on HAZ, recast and oxide layer characteristics in laser drilling of TBC nickel superalloys , 2006 .

[22]  C. Fotakis,et al.  Laser micro machining of 3C-SiC single crystals , 2006 .

[23]  Hong Yang,et al.  Water-assisted drilling of microfluidic chambers inside silica glass with femtosecond laser pulses , 2006 .

[24]  A. Khalil,et al.  Study of experimental and numerical simulation of laser ablation in stainless steel , 2005 .

[25]  D. Kothwala,et al.  Development and assessment of 316LVM cardiovascular stents , 2004 .

[26]  R. Xu,et al.  Mechanisms of laser drilling of metal plates underwater , 2004 .

[27]  A. Kruusing.  Underwater and water-assisted laser processing: Part 2—Etching, cutting and rarely used methods , 2004 .

[28]  Arvi Kruusing,et al.  Underwater and water-assisted laser processing: Part 1-general features, steam cleaning and shock processing [review article] , 2004 .

[29]  J. Jones,et al.  Melt ejection during laser drilling of metals , 2003 .

[30]  Lin Li,et al.  Comparative statistical analysis of hole taper and circularity in laser percussion drilling , 2002 .

[31]  Kai Chen,et al.  Process Optimisation in Pulsed Laser Micromachining with Applications in Medical Device Manufacturing , 2000 .