Finite element computational dynamics of rotating systems

This bibliography lists references to papers, conference proceedings and theses/dissertations dealing with finite element analysis of rotor dynamics problems that were published in 1994–1998. It contains 319 citations. Also included, as separate subsections, are finite element analyses of rotor elements – discs, shafts, spindles, and blades. Topics dealing with fracture mechanics, contact and stability problems of rotating machinery are also considered in specific sections. The last part of the bibliography presents papers dealing with specific industrial applications.

[1]  Atcom,et al.  Aerodynamic and Numerical Issues for Coupling CFD into Comprehensive Rotorcraft Analysis , 1997 .

[2]  Eugene R. Reinhart,et al.  Independent life extension of a steam turbine rotor , 1996 .

[3]  Chia-Hsiang Menq,et al.  Characterization of Contact Kinematics and Application to the Design of Wedge Dampers in Turbomachinery Blading: Part 2—Prediction of Forced Response and Experimental Verification , 1998 .

[4]  Christophe Pierre,et al.  Reduced Order Modeling and Vibration Analysis of Mistuned Bladed Disk Assemblies With Shrouds , 1998 .

[5]  Seung Jo Kim,et al.  Aeroelastic Response of Composite Rotor Blades Considering Transverse Shear and Structural Damping , 1994 .

[6]  Malcolm C. Staddon,et al.  The Analysis and Resolution of a Fatigue Failure of a Low Pressure Turbine Blade Caused by the Excitation of a Bladed Disc Mode of Vibration , 1997 .

[7]  G Belloni,et al.  Fretting fatigue conditions for two types of turboalternator rotor , 1998 .

[8]  H. Irretier,et al.  Comparison of the Rotor Dynamic and Structure Dynamic Calculation of Compressors , 1997 .

[9]  良昭 山内,et al.  混合モード衝撃下における中央切欠円板の動的エネルギー解放率の評価( 材料・構造の衝撃問題) , 1997 .

[10]  W. J. Chen.  Instability threshold and stability boundaries of rotor-bearing systems , 1996 .

[11]  Theodore T. Allen,et al.  Robust Engineering Using Numerical Methods:Application to the Design of D-Shaped Shafts , 1998 .

[12]  T. Sawa,et al.  Elastoplastic finite element stress analysis and strength evaluation of adhesive lap joints of hollow shafts subjected to tensile loads , 1998 .

[13]  Satya N. Atluri,et al.  Effects of multiple blade interaction on the containment of blade fragments during a rotor failure , 1996 .

[14]  H. D. Nelson,et al.  A Study on the Dynamic Characteristics of Geared Rotor-Bearing System With Hybrid Method , 1994 .

[15]  Wei-Hua Chieng,et al.  Modeling and Analysis of the Intermediate Shaft Between Two Universal Joints , 1996 .

[16]  W. M. Mansour,et al.  Modal Parameters For Cracked Rotors: Models And Comparisons , 1994 .

[17]  V. Ramamurti,et al.  STUDIES ON THE DETERMINATION OF NATURAL FREQUENCIES OF INDUSTRIAL TURBINE BLADES , 1996 .

[18]  Giuseppe Sala,et al.  Environmental and Mechanical Fatigue of Wind Turbine Blades Made of Composites Materials , 1996 .

[19]  R. Sheehan,et al.  60MW high pressure turbine rotor brittle fracture analysis and remanent life investigation , 1996 .

[20]  Olivier A. Bauchau,et al.  Multi-body formulation for rotorcraft dynamic analysis , 1995 .

[21]  P. K. Sinha,et al.  Finite Element Free Vibration Analysis of Rotating Laminated Composite Pretwisted Cantilever Plates , 1997 .

[22]  Philip Clausen,et al.  STRUCTURAL DESIGN OF A COMPOSITE WIND TURBINE BLADE USING FINITE ELEMENT ANALYSIS , 1997 .

[23]  Leon M Keer,et al.  Critical speeds and buckling loads of a pre-twisted rotor , 1995 .

[24]  Eduardo Morgado Belo,et al.  Analysis and vibration control of a helicopter rotor blade , 1994 .

[25]  M. A. Mohiuddin,et al.  Modal characteristics of rotors using a conical shaft finite element , 1994 .

[26]  Jaewook Rhim,et al.  Vibration analysis of rotating composite beams using a finite element model with warping degrees of freedom , 1995 .

[27]  Shaker A. Meguid,et al.  Theoretical and experimental studies of structural integrity of dovetail joints in aeroengine discs , 1996 .

[28]  Yukinori Kobayashi,et al.  Free Vibration of a Rotating Disk–Blade Coupled System With Shrouds , 1996 .

[29]  Y. Huang,et al.  The stress and deflection analysis for the radial blades of the RCAC system , 1997 .

[30]  Gisli Sigurbjorn Ottarsson,et al.  Dynamic modeling and vibration analysis of mistuned bladed disks. , 1994 .

[31]  Qing Hua Qin,et al.  Coupled torsional-flexural vibration of shaft systems in mechanical engineering—II. FE-TM impedance coupling method , 1996 .

[32]  Yasutomo Kaneko,et al.  Noncontact Vibrational Measurement Technology of Steam Turbine Blade , 1995 .

[33]  J. Kicinski,et al.  The non-linear analysis of the effect of support construction properties on the dynamic properties of multi-support rotor systems , 1997 .

[34]  J. Yu,et al.  3-D solid finite element modeling of rotating shafts , 1997 .

[35]  Lien-Wen Chen,et al.  Whirl speeds and stability of rotating shaft subjected to end loads , 1995 .

[36]  Kenneth C. Hall,et al.  Helicopter rotor lift distributions for minimum induced power loss , 1994 .

[37]  A. A. Renshaw,et al.  ASYMMETRIC, SPEED DEPENDENT TENSIONING OF CIRCULAR ROTATING DISKS , 1998 .

[38]  A. de-Andrés,et al.  Elastoplastic finite element analysis of three-dimensional fatigue crack growth in aluminum shafts subjected to axial loading , 1999 .

[39]  B. O. Dirr,et al.  Detection and simulation of small trasverse cracks in rotating shafts , 1994, Archive of Applied Mechanics.

[40]  Joseph J. Hollkamp,et al.  Comparison of damping treatments for gas turbine blades , 1996, Smart Structures.

[41]  Ramesh Chandra,et al.  The Natural Frequencies of Rotating Composite Beams with Tip Sweep , 1996 .

[42]  M. Manivannan,et al.  Crack Detection , 1947, Nature.

[43]  O. Repetski,et al.  The Sensitivity Analysis for Life Estimation of Turbine Blades , 1997 .

[44]  Lien-Wen Chen,et al.  Dynamic Stability of Rotating Blades with Geometric Non-Linearity , 1995 .

[45]  Jaroslav Mackerle.  An information retrieval system for finite element and boundary element literature and software , 1993 .

[46]  Ming-Shaung Ju,et al.  Experimental Study on Vibration of a Rotating Blade , 1993 .

[47]  Tsunemoto Kuriyagawa,et al.  Development of Wheel Spindle for Ultra-High Speed Surface Grinding Machine. Studies on Ultra-High Speed Grinding. (1st Report). , 1996 .

[48]  Fehmi Cirak,et al.  ZEITSCHRIFT FÜR ANGEWANDTE MATHEMATIK UND MECHANIK , 1952, Über Stammfaktoren bei ternären quadratischen Formen.

[49]  Bernard Ross,et al.  Inordinate failures of rotating biological contactor (RBC) drive shafts in wastewater treatment plant service worldwide , 1994 .

[50]  A. S. Sekhar,et al.  Stability analysis of a rigid rotor supported on hydrodynamic journal bearings with rough surfaces using the stochastic finite element method , 1998 .

[51]  B. J. Hsieh.  Transient analysis of a flywheel battery containment during a full rotor burst event. , 1998 .

[52]  J. S. Rao,et al.  A Mixed Shell Element for Cambered Helicoidal Blades and Dynamic Stresses due to Aerodynamic Excitation , 1998 .

[53]  Martin N. Raftenberg,et al.  Close-in blast loading of a steel disc; sensitivity to steel strength modeling , 1997 .

[54]  Inderjit Chopra,et al.  Formulation of a rotor-system damage detection methodology , 1995 .

[55]  J. S. Rao,et al.  Vibration Analysis of Rotating Cambered Helicoidal Turbomachine Blades , 1997 .

[56]  J. F. Abel,et al.  Comparison of two finite element approaches for analysis of rotating bladed-disk assemblies , 1995 .

[57]  Yuan Kang,et al.  Development and modification of a unified balancing method for unsymmetrical rotor-bearing systems , 1997 .

[58]  Rajeev Jain,et al.  Rotating anisotropic disc of uniform strength , 1999 .

[59]  Inderjit Chopra,et al.  Detection of Helicopter Rotor System Simulated Faults Using Neural Networks , 1996 .

[60]  J. N Fawcett,et al.  Coupled torsional-lateral-axial vibration analysis of a geared shaft system using substructure synthesis , 1996 .

[61]  Nilanjan Mukherjee,et al.  A finite element free vibration analysis of a thermally stressed spinning plate , 1996 .

[62]  Qing Hua Qin,et al.  Coupled torsional-flexural vibration of shaft systems in mechanical engineering—I. Finite element model , 1996 .

[63]  A. S. Sekhar,et al.  Analysis of rotors considering distributed bearing stiffness and damping , 1996 .

[64]  Jin Kyung Choi,et al.  Characteristics of a spindle bearing system with a gear located on the bearing span , 1997 .

[65]  充広 岩田,et al.  多翼ファンの設計技術に関する研究(第2報,軸系のねじり振動モデルの基礎的検討) , 1996 .

[66]  L. San Andres,et al.  Imbalance response of a rotor supported on open-ends integral squeeze film dampers , 1999 .

[67]  Xiaoyang Shang,et al.  Aeroelastic stability of composite rotor blades in hover , 1995 .

[68]  S. Audebert,et al.  Multi-bearing rotor model updating using experimental modal and response data , 1997 .

[69]  D.Satish Kumar,et al.  Disc flexibility effects in rotor bearing systems , 1997 .

[70]  Giancarlo Genta,et al.  A harmonic finite element for the analysis of flexural, torsional and axial rotordynamic behaviour of discs , 1996 .

[71]  N. Ganesan,et al.  COMPARISON OF BEAM AND PLATE THEORIES FOR FREE VIBRATIONS OF METAL MATRIX COMPOSITE PRE-TWISTED BLADES , 1996 .

[72]  D.Nelson Harold,et al.  Rotordynamic Modeling and Analysis Procedures : A Review , 1998 .

[73]  Timothy L. Krantz.  NASA/Army Rotorcraft Transmission Research, a Review of Recent Significant Accomplishments , 1994 .

[74]  Inderjit Chopra,et al.  Air Resonance of Hingeless Rotor Helicopters in Trimmed Forward Flight , 1994 .

[75]  Erwin Krämer,et al.  Dynamics of Rotors and Foundations , 1993 .

[76]  T. E. Purcell.  Dynamic stress analysis of gas turbine rotor airfoils using thermoelastic techniques , 1996 .

[77]  Guido Dhondt,et al.  The effect of the geometry and the load level on the dynamic failure of rotating disks , 1999 .

[78]  T. K. Paul,et al.  A centrally cracked thin circular disk, Part II: mixed mode fatigue crack propagation , 1998 .

[79]  K. Kimura,et al.  Vibration analysis of a high speed and light weight rotor system subjected to a pitching or turning motion: II: A flexible rotor system on flexible suspensions , 1995 .

[80]  Dietmar K. Hennecke,et al.  Blade Vibrations of a High Speed Compressor Blisk-Rotor: Numerical Resonance Tuning and Optical Measurements , 1996 .

[81]  Yehia A. Khulief,et al.  COUPLED BENDING TORSIONAL VIBRATION OF ROTORS USING FINITE ELEMENT , 1999 .

[82]  B. O. Al-Bedoor,et al.  Dynamic model of coupled shaft torsional and blade bending deformations in rotors , 1999 .

[83]  I. Ballo,et al.  NON-LINEAR EFFECTS OF VIBRATION OF A CONTINUOUS TRANSVERSE CRACKED SLENDER SHAFT , 1998 .

[84]  Christophe Pierre,et al.  An Experimental Investigation of Vibration Localization in Bladed Disks: Part I — Free Response , 1997 .

[85]  A. S. Sekhar,et al.  VIBRATION CHARACTERISTICS OF A CRACKED ROTOR WITH TWO OPEN CRACKS , 1999 .

[86]  N. Ganesan,et al.  A modified semi-analytical approach towards the modelling of a shaft-disc system , 1996 .

[87]  Y.-M. Cheng,et al.  Aeroelastic response of a coupled rotor/fuselage system in hovering and forward flight , 1999 .

[88]  J. Mackerle.  BIBLIOGRAPHY: Smart materials and structures - a finite-element approach: a bibliography (1986-1997) , 1998 .

[89]  Glenn R. Heppler,et al.  The effect of rotating speed on the flexural vibration of a Timoshenko beam , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[90]  Nobuyuki Iwatsuki,et al.  Theoretical Modal Analysis of a Circular Plate with a Solid Shaft and a Solid Cylinder. , 1995 .

[91]  B. O. Al-Bedoor,et al.  Finite element dynamic modeling of a translating and rotating flexible link , 1996 .

[92]  S. Atluri,et al.  Dynamic analysis of planar flexible beams with finite rotations by using inertial and rotating frames , 1995 .

[93]  Jorgen L. Nikolajsen.  The effect of misalignment on rotor vibrations , 1998 .

[94]  M. Mase,et al.  Study On The Contact Analysis Technology And Optimal Figure Design Of The Root And Groove For Steam Turbine Long Blades , 1970 .

[95]  In Lee,et al.  Aeroelastic analysis of composite rotor blades in hover , 1998 .

[96]  Jaroslav Mackerle.  Finite element analysis of machine elements , 1999 .

[97]  George H. Quentin,et al.  Life Assessment of Gas Turbine Blades and Vanes , 1997 .

[98]  M. O. Dedekind,et al.  Implementation of creep-fatigue model into finite element code to assess cooled turbine blade , 1994 .

[99]  Gao-Lian Liu.  The Generalized Untwist Problem of Rotating Blades: A Coupled Aeroelastic Formulation , 1994 .

[100]  Ali Durdu,et al.  Determination of Buckling Speed for Rotating Orthotropic Disk Restrained at Outer Edge , 1998 .

[101]  Kyosuke Ono,et al.  Vibration Analysis of Hydrostatic Gas Bearing Spindle Considering the Elastic Deformation of Rotor. , 1996 .

[102]  N. Sivaneri,et al.  Bilinear Formulation Applied to the Response and Stability of Helicopter Rotor Blade , 1994 .

[103]  T. Zimmerman,et al.  Numerical evaluation of the rotating crack model , 1998 .

[104]  Jerry H. Griffin,et al.  A reduced order approach for the vibration of mistuned bladed disk assemblies , 1997 .

[105]  L. Forrai,et al.  Stability Analysis of Symmetrical Rotor-Bearing Systems With Internal Damping Using Finite Element Method , 1996 .

[106]  Edward C. Smith,et al.  Aeroelastic Analysis of Transient Blade Dynamics During Shipboard Engage/Disengage Operations , 1998 .

[107]  T.-C. Tsai,et al.  THE VIBRATION OF A ROTOR WITH A TRANSVERSE OPEN CRACK , 1998 .

[108]  F. C. Nelson,et al.  Rotodynamic Modeling of an Actively Controlled Magnetic Bearing Gas Turbine Engine , 1998 .

[109]  A. S. Sekhar,et al.  Vibration and stress fluctuation in cracked shafts , 1994 .

[110]  In Lee,et al.  Aeroelastic Stability of Hingeless Rotor Blade in Hover Using Large Deflection Theory , 1994 .

[111]  D. H. van Campen,et al.  Steady-state behaviour of flexible rotordynamic systems with oil journal bearings , 1994 .

[112]  Iouri S. Vorobev,et al.  Numerical Investigation of Blade Packet Vibrations , 1997 .

[113]  Tsutomu Yamashita,et al.  Free Vibration Analysis of Rotating Thin Twisted Plates. , 1995 .

[114]  Michele A. Caponero,et al.  Modal analysis by holographic interferometry of a turbine blade for aircraft engines , 1994, Other Conferences.

[115]  Yukinori Kobayashi,et al.  ANALYSIS OF FREE VIBRATION OF ROTATING DISK –BLADE COUPLED SYSTEMS BY USING ARTIFICIAL SPRINGS AND ORTHOGONAL POLYNOMIALS , 1996 .

[116]  Jen-San Chen,et al.  Vibration and Stability of a Spinning Disk in Contact With Evenly-Spaced Stationary Load Systems , 1998 .

[117]  Inderjit Chopra,et al.  Simulation of Helicopter Rotor-System Structural Damage, Blade Mistracking, Friction, and Freeplay , 1998 .

[119]  A.-V. Phan,et al.  DETERMINATION OF THE ASYNCHRONOUS LOAD ON A ROTOR FROM THE MEASURED INTERNAL FORCES , 1997 .

[120]  In Lee,et al.  Refined aeroelastic analysis of hingeless rotor blades in hover , 1997 .

[121]  Rai Wung Park.  Crack Detection, Localization and Estimation of the Intensity in a Turbo Rotor , 1996 .

[122]  Donald L. Kunz,et al.  Survey and comparison of engineering beam theories for helicopter rotor blades , 1994 .

[123]  Vincent Garnier,et al.  A Numerical Method for the Prediction of Bladed Disk Forced Response , 1997 .

[124]  In Lee,et al.  Aeroelastic analysis of multibladed hingeless rotors in hover , 1995 .

[125]  Anthony G. Taylor,et al.  The effect of damping on the stability of a finite element model of a flexible non-axisymmetric rotor on tilting pad bearings , 1995 .

[126]  V. Kannan,et al.  Finite Element Analysis and Design of a Trochoidal-Type Machine Without Apex Seals , 1998 .

[127]  P. F. Cavalcante,et al.  A method to analyse the interaction between rotor-foundation systems , 1998 .

[128]  S. Lai.  Geometrically nonlinear transient analysis of a rotating beam structure carrying a static payload , 1994 .

[129]  J. Kicinski,et al.  Nonlinear Model of Vibrations in a Rotor-Bearings System , 1998 .

[130]  Rongqiao Wang,et al.  Damage Tolerance Analysis of Compressor Blade , 1994 .

[131]  T. N. Shiau,et al.  Vibration and Control of a Flexible Rotor in Magnetic Bearings Using Hybrid Method and H∞ Control Theory , 1997 .

[132]  B. Villechaise,et al.  A Finite Element Analysis of Crack Initiation and Propagation in a Notched Disk Submitted to Rolling Contact Fatigue , 1998 .

[133]  Yasutomo Kaneko,et al.  Noncontact Vibrational Measurement Technology of Steam Turbine Blade. , 1992 .

[134]  R. A. King,et al.  Fatigue cracking of the generator rotor damper bars, Jocassee Pumped Storage Station , 1997 .

[135]  T. K. Paul.  Stresses in a thin centrally cracked circular disk , 1995 .

[136]  M. A. Mohiuddin,et al.  Modal characteristics of cracked rotors using a conical shaft finite element , 1998 .

[137]  Steven H.-Y. Lai.  Dynamic modeling and control of a rotating piezo-bonded beam-mass system , 1994 .

[138]  Hsiao-Wei D. Chiang,et al.  A CYCLIC SYMMETRY ANALYSIS FOR TURBOMACHINE BLADE FLUTTER , 1998 .

[140]  Gregory M. Hulbert,et al.  An efficient tire model for the analysis of spindle forces produced by a tire impacting large obstacles , 1996 .

[141]  Edward C. Smith,et al.  Experimental and Theoretical Correlation of Helicopter Rotor Blade-Droop Stop Impacts , 1999 .

[142]  Lien-Wen Chen,et al.  The stability behavior of rotating composite shafts under axial compressive loads , 1998 .

[143]  C. A. Papadopoulos,et al.  Torsional vibrations of rotors with transverse surface cracks , 1994 .

[144]  R. Kieselbach,et al.  Analysis Of Fretting Fatigue Failure , 1970 .

[145]  H. Vinayak,et al.  EIGENSOLUTIONS OF ANNULAR-LIKE ELASTIC DISKS WITH INTENTIONALLY REMOVED OR ADDED MATERIAL , 1996 .

[146]  A. Carpinteri,et al.  Surface flaws in cylindrical shafts under rotary bending , 1998 .

[147]  Darryll J. Pines,et al.  Damage detection of main rotor faults using a sensitivity-based approach , 1997, Smart Structures.

[148]  David B. Bogy,et al.  Effect of the Rotor/Stator Interface Condition Including Contact Type, Geometry, and Material on the Performance of Ultrasonic Motor , 1994 .

[149]  S. Lai,et al.  An improved numerical scheme for characterizing dynamic behavior of high-speed rotating elastic beam structures , 1994 .

[150]  Daniel A. Wachspress,et al.  Rotor aerodynamic loads computation using a constant vorticity contour free wake model , 1995 .

[151]  Christophe Pierre,et al.  A reduced-order modeling technique for mistuned bladed disks , 1994 .

[152]  Chuck A. Pistner,et al.  Influence of bearing support structures on shaft vibration of large hydraulic pump/turbines , 1995 .

[153]  William C. Newland.  Structural Qualification of a Main Rotor Yoke Using the Finite-Element Analysis Method , 1994 .

[154]  Inderjit Chopra,et al.  Formulation of a Helicopter Rotor System Damage Detection Methodology , 1996 .

[155]  Lien-Wen Chen,et al.  Stability and whirl speeds of rotating shaft under axial loads , 1994 .

[156]  Giuseppe Surace,et al.  A Finite Element Formulation for Modal Analysis of Twisted Rotating Elastic Beams , 1997 .

[157]  Lien-Wen Chen,et al.  Stability analyses of a cracked shaft subjected to the end load , 1995 .

[158]  Fawzi M.A. El-Saeidy.  Finite Element Modeling of a Rotor Shaft Rolling Bearings System With Consideration of Bearing Nonlinearities , 1998 .

[159]  Katsuya Ishimatsu,et al.  Numerical Simulation for Savonius Rotors. Running Performance and Flow Fields. , 1994 .

[160]  Edward C. Smith,et al.  EXPERIMENTAL/THEORETICAL CORRELATION OF ANALYSIS FOR HELICOPTER ROTOR BLADE/DROOP STOP IMPACTS , 1997 .

[161]  Mehmet Imregun,et al.  An improved single-parameter tip-timing method for turbomachinery blade vibration measurements using optical laser probes , 1996 .

[162]  J. R. Sorem,et al.  Updated Stress Concentration Factors for Filleted Shafts in Bending and Tension , 1996 .

[163]  Pascal Swider,et al.  Influence of Fibre Orientation on the Dynamic Behaviour of Rotating Laminated Composite Blades , 1997 .

[164]  Joseph C. Slater,et al.  Minimizing sensitivity of bladed disks to mistuning , 1998 .

[165]  Frederick Tasker,et al.  Identification of nonlinear helicopter rotor structural dynamics , 1994 .

[166]  Anthony J. Vizzini,et al.  Off-Axis Energy Absorption Characterization of Composites for Crashworthy Rotorcraft Design , 1996 .

[167]  A. M. Sharan,et al.  Free-vibration analysis of turbine blades using nonlinear finite element method , 1997 .

[168]  A. Craggs,et al.  A Finite Element Model for a Flexible Non-Symmetric Rotor on Distributed Bearing: a Stability Study , 1994 .

[169]  V. Ramamurti,et al.  EFFECT OF PARTIAL DEPTH CRACKS ON THE NATURAL FREQUENCY OF TWISTED BLADES: A 3-D FINITE ELEMENT ANALYSIS , 1997 .

[170]  James H. Oliver,et al.  Geometric Decomposition and Structural Shape Modification for Turbomachinery Blades , 1994 .

[171]  Enrico Primo Tomasini,et al.  Experimental tuning of resonance frequencies of a turbine blade by a laser scanning vibrometer , 1998 .

[172]  A. Girard,et al.  Model updating by energy approach for rotating shafts , 1997 .

[173]  John E. Mottershead,et al.  Flutter Instability of Circular Discs with Frictional Follower Loads , 1995 .

[174]  Heinrich Hasemann,et al.  Investigation of the Solidity and the Blade Vibration Behaviour of Unshrouded Centrifugal Compressor Impellers With Different Aerodynamic Design , 1997 .

[175]  Hao Wang,et al.  A FINITE ELEMENT APPROACH TO THE ANALYSIS OF ROTATING BLADED-DISK ASSEMBLIES COUPLED WITH FLEXIBLE SHAFT* , 1994 .

[176]  Erian A. Armanios,et al.  Star-shape cross-section extension-twist-coupled composite beams for rotorcraft applications , 1998 .

[177]  A. Avila.  Integrated Micro/Macro Approach for Laminate Composite Analysis: Applications to Turbine Blades , 2000 .

[178]  C.-G. Chien,et al.  Non-Linear Vibration Analysis of the Coupled Textile/rotor System by Finite Element Method , 1999 .

[179]  Jaroslav Mackerle.  Finite element methods : a guide to information sources , 1991 .

[180]  Tai-Yan Kam,et al.  Stiffness identification of laminated composite shafts , 1998 .

[181]  John Vorwald,et al.  Dynamics Workshop On Rotor Vibratory Loads Prediction , 1998 .

[182]  O. Sayman,et al.  Elasto-plastic finite element analysis of orthotropic rotating discs with holes , 1994 .

[183]  H. L. Wettergren,et al.  THE INFLUENCE OF IMPERFECTIONS ON THE EIGENFREQUENCIES OF A ROTATING COMPOSITE SHAFT , 1997 .

[184]  Harry R. Millwater,et al.  Application of advanced probabilistic fracture mechanics to life evaluation of turbine rotor blade attachments , 1996 .

[185]  Inderjit Chopra,et al.  Aeroelastic Analysis of a Composite Bearingless Rotor in Forward Flight Using an Improved Warping Model , 1995 .

[186]  S. Aksoy,et al.  Structural Evaluation and Testing of Swept Compressor Rotor , 1994 .

[187]  A. S. Sekhar,et al.  Unbalance Response of Rotors Considering the Distributed Bearing Stiffness and Damping , 1994 .

[188]  A. S. Sekhar,et al.  Vibration Analysis of Rotor - Coupling - Bearing System With Misaligned Shafts , 1996 .

[189]  T. H. McCloskey,et al.  3D modeling of imperfect contact conditions between turbine blades and disk , 1994 .

[190]  M. Rades.  ROTORDYNAMICS PREDICTION IN ENGINEERING Michel Lalanne and Guy Ferraris John Wiley & Sons, Inc. Chichester, New York, Brisbane, Toronto, Singapore 1990, 198 pp, $29.95 , 1993 .

[191]  Michael D. Fitzpatrick,et al.  Design of a High Efficiency Industrial Turbine Blade Utilizing Third Generation Single Crystal Alloy CMSX®-10 , 1997 .

[192]  C. A. Papadopoulos,et al.  Modal Analysis of Rotor on Piecewise Linear Journal Bearings Under Seismic Excitation , 1999 .

[193]  Prabhat Hajela,et al.  Rotorcraft Subfloor Design for Enhanced Crashworthiness Characteristics , 1997 .

[194]  P. K. Sinha,et al.  Finite Element Transient Dynamic Analysis of Laminated Composite Pretwisted Rotating Plates Subjected to Impact , 1998 .

[195]  Jin Zhang,et al.  Modal Analysis of Blades With Densely Distributed Small Holes , 1994 .

[196]  V. Zeman,et al.  Dynamical analysis of the large mechanical systems containing subsystems , 1998 .

[197]  Chong-Won Lee,et al.  Vibration Analysis of Rotors , 1994 .

[198]  J. Broede,et al.  Axisymmetric substitute structures for circular disks with noncentral holes , 1996 .

[199]  Peretz P. Friedmann,et al.  Aeroelastic behavior of composite helicopter rotor blades with advanced geometry tips , 1995 .

[200]  Nobuyuki Iwatsuki,et al.  The Theoretical Modal Analysis of a Circular Plate With a Solid Shaft , 1994 .

[201]  Lihua You,et al.  Elastic-plastic stresses in a rotating solid disk , 1999 .

[202]  Steven H.-Y. Lai.  Nonlinear finite element modeling of a high speed rotating timoshenko beam structure , 1994 .

[203]  D. L. Jones,et al.  Analyses and design tool for the prediction of structural failure of current and future composite wind turbine blades , 1995 .

[204]  Yu Wang.  Prediction of Periodic Response of Rotor Dynamic Systems With Nonlinear Supports , 1997 .

[205]  M. Geradin,et al.  Finite element simulation of non‐linear transient response due to rotor‐stator contact , 1997 .

[206]  G. Csaba,et al.  Forced Response Analysis in Time and Frequency Domains of a Tuned Bladed Disk with Friction Dampers , 1998 .

[207]  G. Ferraris,et al.  FREQUENCIES AND MODES OF ROTATING FLEXIBLE BLADED DISC-SHAFT ASSEMBLIES: A GLOBAL CYCLIC SYMMETRY APPROACH , 1996 .

[208]  Anthony M. Waas,et al.  Stability analysis of a rotating multi-layer annular plate with a stationary frictional follower load , 1997 .

[209]  C. H. Menq,et al.  Prediction of the Resonant Response of Frictionally Constrained Blade Systems Using Constrained Mode Shapes , 1998 .

[210]  Lien-Wen Chen,et al.  Dynamic stability of cracked rotating beams of general orthotropy , 1997 .

[211]  Shaker A. Meguid,et al.  Three-dimensional nonlinear finite element analysis of dovetail joints in aeroengine discs , 1998 .

[212]  Hossein Saberi,et al.  Application of 2GCHAS to the Investigation of Aeromechanical Stability of Hingeless and Bearingless Rotor Helicopters , 1995 .

[213]  T. N. Shiau,et al.  Vibration and Control of a Flexible Rotor in Magnetic Bearings Using Hybrid Method and H∞ Control Theory , 1994 .

[214]  Gao-Lian Liu,.  The Generalized Untwist Problem of Rotating Blades: A Coupled Aeroelastic Formulation , 1995 .

[215]  Inderjit Chopra,et al.  Aeroelastic Tailoring of Composite Couplings and Blade Geometry of a Helicopter Rotor Using Optimization Methods , 1997 .

[216]  Peretz Friedman,et al.  Aeroelastic stability, response and loads of swept tip composite rotor blades in forward flight , 1994 .

[217]  A. S. Sekhar,et al.  Crack versus misalignment in rotor-coupling bearing system , 1996 .

[218]  Lien-Wen Chen,et al.  STABILITY ANALYSES OF A TIMOSHENKO SHAFT WITH DISSIMILAR LATERAL MOMENTS OF INERTIA , 1997 .

[219]  Inderjit Chopra,et al.  Comparison of Calculated Vibratory Rotor Hub Loads with Experimental Data , 1998 .

[220]  A. S. Sekhar,et al.  Effects of coupling misalignment on vibrations of rotating machinery , 1995 .

[221]  M. Ohnami,et al.  Fatigue Crack Propagation for Cast Iron Rotating Disk , 1995 .

[222]  Shaker A. Meguid,et al.  THEORETICAL AND EXPERIMENTAL STUDIES OF FRETTING‐INITIATED FATIGUE FAILURE OF AEROENGINE COMPRESSOR DISCS , 1994 .

[223]  F. C. Nelson,et al.  Rotordynamic Modeling of an Actively Controlled Magnetic Bearing Gas Turbine Engine , 1997 .

[224]  Marc Berthillier,et al.  Blades Forced Response Analysis With Friction Dampers , 1998 .

[225]  C. N. Chang,et al.  Dynamic Analysis and Design of a Machine Tool Spindle-Bearing System , 1994 .

[226]  N. Okamoto,et al.  Finite Element and Experimental Studies of Creep at the Interface of Press Fitted Gears-Shafts Connections , 1996 .

[227]  Michele A. Caponero,et al.  Structural analysis of an aircraft turbine blade prototype by use of holographic interferometry , 1994, Optics & Photonics.

[228]  Carlos E. S. Cesnik,et al.  VABS: A New Concept for Composite Rotor Blade Cross-Sectional Modeling , 1995 .

[229]  Kazuhiro Yokoyama.  Analysis of Deformation of Air-spindle due to Centrifugal Force. , 1998 .

[230]  Harry R. Millwater,et al.  Application of advanced probabilistic fracture mechanics to life evaluation of turbine rotor blade attachments , 1995 .

[231]  Bhushan Lal Karihaloo,et al.  An improved hybrid-stress element approach to torsion of shafts , 1999 .

[232]  G. v. Esebeck,et al.  Investigation on Ceramic–Metal Joints for Shaft–Hub Connections in Gas Turbines , 1996 .

[233]  Gregory M. Hulbert,et al.  The Dynamic Response of Spindle Forces Produced by a Tire Impacting Large Obstacles in a Plane , 1996 .

[234]  G Zboinski.  Physical and Geometrical Non-Linearities in Contact Problems of Elastic Turbine Blade Attachments , 1995 .

[235]  Huang Taiping.  THE TRANSFER MATRIX — COMPONENT MODE SYNTHESIS FOR ROTORDYNAMIC ANALYSIS — , 1996 .

[236]  W. J. Chen.  A Note on Computational Rotor Dynamics , 1998 .

[237]  Yuan Kang,et al.  A MODIFIED INFLUENCE COEFFICIENT METHOD FOR BALANCING UNSYMMETRICAL ROTOR-BEARING SYSTEMS , 1996 .

[238]  D. Ku.  Finite Element Analysis of Whirl Speeds for Rotor-Bearing Systems with Internal Damping , 1998 .

[239]  F. K. Straub,et al.  Advance finite element modeling of rotor blade aeroelasticity , 1994 .

[240]  Yehia A. Khulief,et al.  Further results for modal characteristics of rotating tapered Timoshenko beams , 1999 .

[241]  Inderjit Chopra,et al.  Effects of Modeling Refinements on Coupled Rotor/Fuselage Vibration Analysis , 1998 .

[242]  A. S. Sekhar,et al.  DYNAMIC ANALYSIS OF A ROTOR SYSTEM CONSIDERING A SLANT CRACK IN THE SHAFT , 1997 .

[243]  Torque transmission capabilities of adhesively bonded tubular lap joints for composite drive shafts , 1995 .

[244]  Shaker A. Meguid,et al.  On the determination of mixed mode stress intensity factors of an angled crack in a disc using FEM , 1995 .

[245]  Yehia A. Khulief,et al.  On the dynamic analysis of rotors using modal reduction , 1997 .

[246]  Seung Jo Kim,et al.  Effect of transverse shear on aeroelastic stability of a composite rotor blade , 1995 .

[247]  Naoyuki Tanaka,et al.  Creep in Connections between Gears and Shafts. , 1996 .

[248]  Kenzo Nonami,et al.  Sliding Mode Control of Flexible Rotor-Magnetic Bearing Systems Using Robust Reduced-Order VSS Observer. , 1994 .