Hand-powered microfluidics: A membrane pump with a patient-to-chip syringe interface.

In this paper, we present an on-chip hand-powered membrane pump using a robust patient-to-chip syringe interface. This approach enables safe sample collection, sample containment, integrated sharps disposal, high sample volume capacity, and controlled downstream flow with no electrical power requirements. Sample is manually injected into the device via a syringe and needle. The membrane pump inflates upon injection and subsequently deflates, delivering fluid to downstream components in a controlled manner. The device is fabricated from poly(methyl methacrylate) (PMMA) and silicone, using CO2 laser micromachining, with a total material cost of ∼0.20 USD/device. We experimentally demonstrate pump performance for both deionized (DI) water and undiluted, anticoagulated mouse whole blood, and characterize the behavior with reference to a resistor-capacitor electrical circuit analogy. Downstream output of the membrane pump is regulated, and scaled, by connecting multiple pumps in parallel. In contrast to existing on-chip pumping mechanisms that typically have low volume capacity (∼5 μL) and sample volume throughput (∼1-10 μl/min), the membrane pump offers high volume capacity (up to 240 μl) and sample volume throughput (up to 125 μl/min).

[1]  N H Hwang,et al.  Human red blood cell hemolysis in a turbulent shear flow: contribution of Reynolds shear stresses. , 1984, Biorheology.

[2]  David E. Williams,et al.  Point of care diagnostics: status and future. , 2012, Analytical chemistry.

[3]  David J Beebe,et al.  A passive pumping method for microfluidic devices. , 2002, Lab on a chip.

[4]  Jianlong Zhao,et al.  A "place n play" modular pump for portable microfluidic applications. , 2012, Biomicrofluidics.

[5]  Guojun Liu,et al.  A PZT insulin pump integrated with a silicon microneedle array for transdermal drug delivery , 2006, 56th Electronic Components and Technology Conference 2006.

[6]  David J Beebe,et al.  Flow rate analysis of a surface tension driven passive micropump. , 2007, Lab on a chip.

[7]  R. Wells,et al.  Red cell deformation and fluidity of concentrated cell suspensions. , 1969, Journal of applied physiology.

[8]  Wenming Wu,et al.  Hand-held syringe as a portable plastic pump for on-chip continuous-flow PCR: miniaturization of sample injection device. , 2012, The Analyst.

[9]  Juan G. Santiago,et al.  A review of micropumps , 2004 .

[10]  P. Yager,et al.  Point-of-care diagnostics for global health. , 2008, Annual review of biomedical engineering.

[11]  David Sinton,et al.  A miniaturized high-voltage integrated power supply for portable microfluidic applications. , 2004, Lab on a chip.

[12]  Kan Junwu,et al.  Design and test of a high-performance piezoelectric micropump for drug delivery , 2005 .

[13]  George M Whitesides,et al.  Pumping fluids in microfluidic systems using the elastic deformation of poly(dimethylsiloxane). , 2007, Lab on a chip.

[14]  Mir Majid Teymoori,et al.  Design and simulation of a novel electrostatic peristaltic micromachined pump for drug delivery applications , 2005 .

[15]  P. Bergveld,et al.  A plastic micropump constructed with conventional techniques and materials , 1999 .

[16]  M. Gijs,et al.  A PMMA valveless micropump using electromagnetic actuation , 2005 .

[17]  Jörg P Kutter,et al.  AC electroosmotic pump with bubble-free palladium electrodes and rectifying polymer membrane valves. , 2006, Lab on a chip.

[18]  U. Windberger,et al.  Whole Blood Viscosity, Plasma Viscosity and Erythrocyte Aggregation in Nine Mammalian Species: Reference Values and Comparison of Data , 2003, Experimental physiology.

[19]  Y. K. Cheung,et al.  1 Supplementary Information for : Microfluidics-based diagnostics of infectious diseases in the developing world , 2011 .

[20]  Daniel C Leslie,et al.  Frequency-specific flow control in microfluidic circuits with passive elastomeric features , 2009 .

[21]  S C Gandevia,et al.  Limits to the control of the human thumb and fingers in flexion and extension. , 2010, Journal of neurophysiology.

[22]  Tao Chen,et al.  Squeeze-chip: a finger-controlled microfluidic flow network device and its application to biochemical assays. , 2012, Lab on a chip.

[23]  T. R. Hsu,et al.  MEMS and Microsystems , 2001 .

[24]  Yu Zhou,et al.  Current micropump technologies and their biomedical applications , 2009 .

[25]  L. Gervais,et al.  Toward one-step point-of-care immunodiagnostics using capillary-driven microfluidics and PDMS substrates. , 2009, Lab on a chip.

[26]  G. Whitesides.  The origins and the future of microfluidics , 2006, Nature.

[27]  Kangil Kim,et al.  The optimization of PDMS-PMMA bonding process using silane primer , 2010 .

[28]  Babak Ziaie,et al.  A magnetically driven PDMS micropump with ball check-valves , 2005 .

[29]  Luke P. Lee,et al.  Stand-alone self-powered integrated microfluidic blood analysis system (SIMBAS). , 2011, Lab on a chip.

[30]  Chun Yang,et al.  Valveless micropump with acoustically featured pumping chamber , 2010 .

[31]  Roland Zengerle,et al.  Rapid microarray processing using a disposable hybridization chamber with an integrated micropump. , 2012, Lab on a chip.