Review of blast analysis and design for industrial/residential buildings and ammunition storage facilities

[1]  David P. Thambiratnam,et al.  Blast and residual capacity analysis of reinforced concrete framed buildings , 2011 .

[2]  Pedro F. Silva,et al.  Improving the blast resistance capacity of RC slabs with innovative composite materials , 2007 .

[3]  E. Citipitioglu,et al.  RESISTANCE MECHANISMS IN RC BUILDING FRAMES SUBJECTED TO COLUMN FAILURE , 1994 .

[4]  David A. Nethercot,et al.  Progressive collapse of multi-storey buildings due to sudden column loss — Part I: Simplified assessment framework , 2008 .

[5]  Pawan Kumar,et al.  On deformation and tearing of stiffened and un-stiffened square plates subjected to underwater explosion—a numerical study , 2010 .

[6]  John Vantomme,et al.  Investigation of the influence of design and material parameters in the progressive collapse analysis of RC structures , 2011 .

[7]  Fahim Sadek,et al.  Progressive collapse analysis of seismically designed steel braced frames , 2009 .

[8]  Osama Bedair.  Engineering Challenges in the Design of Alberta’s Oil Sands Projects , 2013 .

[9]  Osama K. Bedair.  Interaction of multiple piping penetrations used in mining and petrochemical facilities , 2012 .

[10]  Osama Ahmed Mohamed.  Assessment of progressive collapse potential in corner floor panels of reinforced concrete buildings , 2009 .

[11]  David A. Nethercot,et al.  Progressive collapse of multi-storey buildings due to sudden column loss—Part II: Application , 2008 .

[12]  Bing Li,et al.  Residual Strength of Blast Damaged Reinforced Concrete Columns , 2010 .

[13]  Sang-Rai Cho,et al.  Simple design formulae for predicting the residual damage of unstiffened and stiffened plates under explosion loadings , 2006 .

[14]  Jinkoo Kim,et al.  Assessment of progressive collapse-resisting capacity of steel moment frames , 2009 .

[15]  Arash Naji,et al.  Progressive collapse analysis of steel frames: Simplified procedure and explicit expression for dynamic increase factor , 2012, International Journal of Steel Structures.

[16]  K. Mosalam,et al.  Nonlinear transient analysis of reinforced concrete slabs subjected to blast loading and retrofitted with CFRP composites , 2001 .

[17]  Andrew S. Whittaker,et al.  Blast testing of ultra-high performance fibre and FRP-retrofitted concrete slabs , 2009 .

[18]  Nicola Augenti,et al.  Influence of seismic design criteria on blast resistance of RC framed buildings: A case study , 2012 .

[19]  P. Paramasivam,et al.  Resistance of fibre concrete slabs to low velocity projectile impact , 1999 .

[20]  Feng Fu,et al.  Progressive collapse analysis of high-rise building with 3-D finite element modeling method , 2009 .

[21]  Frieder Seible,et al.  Protection of our bridge infrastructure against man-made and natural hazards , 2008 .

[22]  Daniel G. Linzell,et al.  Behavior of portable fiber reinforced concrete vehicle barriers subject to blasts from contact charges , 2010 .

[23]  Meng-Hao Tsai,et al.  Investigation of progressive collapse resistance and inelastic response for an earthquake-resistant RC building subjected to column failure , 2008 .

[24]  Tarek H. Almusallam,et al.  Progressive collapse analysis of a RC building subjected to blast loads , 2010 .

[25]  S. Millard,et al.  Dynamic enhancement of blast-resistant ultra high performance fibre-reinforced concrete under flexural and shear loading , 2010 .

[26]  Simon A. Austin,et al.  The resistance of steel fibre concrete to VTOL engine jet blast , 1994 .

[27]  Hong Hao,et al.  Numerical derivation of pressure-impulse diagrams for prediction of RC column damage to blast loads , 2008 .

[28]  Eric B. Williamson,et al.  Static Equivalency in Progressive Collapse Alternate Path Analysis: Reducing Conservatism While Retaining Structural Integrity , 2006 .

[29]  Marek Foglar,et al.  Conclusions from experimental testing of blast resistance of FRC and RC bridge decks , 2013 .

[30]  Shalva Marjanishvili,et al.  COMPARISON OF VARIOUS PROCEDURES FOR PROGRESSIVE COLLAPSE ANALYSIS , 2006 .

[31]  Jin Won Nam,et al.  A study on mesh size dependency of finite element blast structural analysis induced by non-uniform pressure distribution from high explosive blast wave , 2008 .

[32]  Kyungkoo Lee,et al.  Simplified nonlinear progressive collapse analysis of welded steel moment frames , 2009 .

[33]  Leslaw Kwasniewski,et al.  Nonlinear dynamic simulations of progressive collapse for a multistory building , 2010 .

[34]  Tarek H. Almusallam,et al.  Progressive collapse potential of a typical steel building due to blast attacks , 2014 .

[35]  Jian fei Chen,et al.  Blast resistance of FRP composites and polymer strengthened concrete and masonry structures - A state-of-the-art review , 2007 .

[36]  Alexander Remennikov,et al.  Modelling blast loads on buildings in complex city geometries , 2005 .

[37]  Gabi Ben-Dor,et al.  Full-scale field tests of concrete slabs subjected to blast loads , 2008 .

[38]  Na Hyun Yi,et al.  Numerical evaluation of the retrofit effectiveness for GFRP retrofitted concrete slab subjected to blast pressure , 2010 .

[39]  Osama Bedair.  Modern steel design and construction in Canada’s oil sands industry , 2014 .

[40]  Jinkoo Kim,et al.  Evaluation of progressive collapse potential of steel moment frames considering catenary action , 2009 .