Augmented Kalman filter with a reduced mechanical model to estimate tower loads on a land-based wind turbine: a step towards digital-twin simulations

Abstract. This article presents an application of the Kalman filtering technique to estimate loads on a wind turbine. The approach combines a mechanical model and a set of measurements to estimate signals that are not available in the measurements, such as wind speed, thrust, tower position, and tower loads. The model is severalfold faster than real time and is intended to be run online, for instance, to evaluate real-time fatigue life consumption of a field turbine using a digital twin, perform condition monitoring, or assess loads for dedicated control strategies. The mechanical model is built using a Rayleigh–Ritz approach and a set of joint coordinates. We present a general method and illustrate it using a 2-degrees-of-freedom (DOF) model of a wind turbine and using rotor speed, generator torque, pitch, and tower-top acceleration as measurement signals. The different components of the model are tested individually. The overall method is evaluated by computing the errors in estimated tower-bottom-equivalent moment from a set of simulations. From this preliminary study, it appears that the tower-bottom-equivalent moment is obtained with about 10 % accuracy. The limitation of the model and the required steps forward are discussed.

[1]  Tao Han,et al.  Development and validation of real time load estimator on Goldwind 6 MW wind turbine , 2018 .

[2]  Jian Yang,et al.  Kalman filter-based wind speed estimation for wind turbine control , 2017 .

[3]  Jan-Willem van Wingerden,et al.  Validation of a lookup-table approach to modeling turbine fatigue loads in wind farms under active wake control , 2019 .

[4]  E. Jacquelin,et al.  Force reconstruction: analysis and regularization of a deconvolution problem , 2003 .

[5]  Jan-Willem van Wingerden,et al.  Validation of a lookup-table approach to modeling turbine fatigue loads in wind farms under active wake control , 2019 .

[6]  Niels Kjølstad Poulsen,et al.  Wind Speed Estimation and Parametrization of Wake Models for Downregulated Offshore Wind Farms within the scope of PossPOW Project , 2014 .

[7]  Jacob Berg,et al.  From wind to loads: wind turbine site-specific load estimation with surrogate models trained on high-fidelity load databases , 2018, Wind Energy Science.

[8]  Thomas Bak,et al.  Prediction models for wind speed at turbine locations in a wind farm , 2011 .

[9]  M. Bertelè,et al.  Simultaneous estimation of wind shears and misalignments from rotor loads: formulation for IPC-controlled wind turbines , 2018, Journal of Physics: Conference Series.

[10]  Houria Siguerdidjane,et al.  Nonlinear Control of a Variable-Speed Wind Turbine Using a Two-Mass Model , 2011, IEEE Transactions on Energy Conversion.

[11]  Lisa Sabine Ziegler,et al.  Brief communication: Structural monitoring for lifetime extension of offshore wind monopiles: can strain measurements at one level tell us everything? , 2017 .

[12]  Ervin Bossanyi,et al.  Individual Blade Pitch Control for Load Reduction , 2003 .

[13]  Lucy Y. Pao,et al.  Evaluation of a wind speed estimator for effective hub‐height and shear components , 2016 .

[14]  Paul Zarchan,et al.  Fundamentals of Kalman Filtering: A Practical Approach, Fourth Edition , 2015 .

[15]  Patrick Guillaume,et al.  A modal decomposition and expansion approach for prediction of dynamic responses on a monopile offshore wind turbine using a limited number of vibration sensors , 2016 .

[16]  David Schlipf,et al.  Advanced controller research for multi-MW wind turbines in the UPWIND project , 2012 .

[17]  Josep M. Guerrero,et al.  Industrial Applications of the Kalman Filter: A Review , 2013, IEEE Transactions on Industrial Electronics.

[18]  Paul Zarchan,et al.  Fundamentals of Kalman Filtering: A Practical Approach , 2001 .

[19]  Emmanuel Branlard,et al.  Flexible multibody dynamics using joint coordinates and the Rayleigh‐Ritz approximation: The general framework behind and beyond Flex , 2019, Wind Energy.

[20]  Michel Verhaegen,et al.  Feedback–feedforward individual pitch control for wind turbine load reduction , 2009 .

[21]  Jonathan Chauvin,et al.  Wind speed estimation for wind turbine control , 2012, 2012 IEEE International Conference on Control Applications.

[22]  Geert Lombaert,et al.  An augmented Kalman filter for force identification in structural dynamics , 2012 .

[23]  Mohinder S. Grewal,et al.  Kalman Filtering: Theory and Practice Using MATLAB , 2001 .

[24]  Jakob Stoustrup,et al.  Estimation of effective wind speed , 2007 .

[25]  Lao Juan,et al.  Development and Validation of a Scale for Measuring Instructors' Attitudes toward Concept-Based or Reform-Oriented Teaching of Introductory Statistics in the Health and Behavioral Sciences , 2010, 1007.3219.

[26]  Rafael Wisniewski,et al.  Estimation of Rotor Effective Wind Speed: A Comparison , 2013, IEEE Transactions on Control Systems Technology.

[27]  J. Jonkman,et al.  Definition of a 5-MW Reference Wind Turbine for Offshore System Development , 2009 .

[28]  Chih-Kao Ma,et al.  An inverse method for the estimation of input forces acting on non-linear structural systems , 2004 .

[29]  John Aasted Sørensen,et al.  Wind turbine site-specific load estimation using artificial neural networks calibrated by means of high-fidelity load simulations , 2018, Journal of Physics: Conference Series.

[30]  C. Papadimitriou,et al.  A dual Kalman filter approach for state estimation via output-only acceleration measurements , 2015 .