Fabrication of silicon condenser microphones using single wafer technology

A condenser microphone design that can be fabricated using the sacrificial layer technique is proposed and tested. The microphone backplate is a 1- mu m plasma-enhanced chemical-vapor-deposited (PECVD) silicon nitride film with a high density of acoustic holes (120-525 holes/mm/sup 2/), covered with a thin Ti/Au electrode. Microphones with a flat frequency response between 100 Hz and 14 kHz and a sensitivity of typically 1-2 mV/Pa have been fabricated in a reproducible way. These sensitivities can be achieved using a relatively low bias voltage of 6-16 V. The measured sensitivities and bandwidths are comparable to those of other silicon microphones with highly perforated backplates. The major advantage of the new microphone design is that it can be fabricated on a single wafer so that no bonding techniques are required. >

[1]  G. Wallis,et al.  Field Assisted Glass‐Metal Sealing , 1969 .

[2]  M. Royer,et al.  ZnO on Si integrated acoustic sensor , 1983 .

[3]  Richard S. Muller,et al.  Improved IC-compatible piezoelectric microphone and CMOS process , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[4]  R. Schellin,et al.  A silicon subminiature microphone based on piezoresistive polysilicon strain gauges , 1992 .

[5]  T. Bourouina,et al.  A new condenser microphone with a p+ silicon membrane , 1992 .

[6]  Piet Bergveld,et al.  PECVD silicon nitride diaphragms for condenser microphones , 1991 .

[7]  F. Parodi,et al.  A silicon condenser microphone with a highly perforated backplate , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[8]  Reimund Gerhard-Multhaupt,et al.  Silicon‐dioxide electret transducer , 1984 .

[9]  Wouter Olthuis,et al.  Fabrication of a subminiature silicon condenser microphone using the sacrificial layer technique , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[10]  J. Bergqvist,et al.  A new condenser microphone in silicon , 1990 .

[11]  P. Murphy,et al.  Subminiature silicon integrated electret capacitor microphone , 1989 .

[12]  W. Kühnel,et al.  A silicon condenser microphone with structured back plate and silicon nitride membrane , 1992 .

[13]  A. J. Sprenkels,et al.  Development of an electret microphone in silicon , 1989 .

[14]  W. Kühnel,et al.  Micromachined subminiature condenser microphones in silicon , 1992 .

[15]  T. Christenson,et al.  Fabrication of micromechanical devices from polysilicon films with smooth surfaces , 1989 .

[16]  Gisela Hess,et al.  A subminiature condenser microphone with silicon nitride membrane and silicon back plate , 1989 .