Numerical analysis and experimental validation of Gerotor pumps: A comparison between a lumped parameter and a computational fluid dynamics-based approach
暂无分享,去创建一个
Andrea Vacca | Adolfo Senatore | Emma Frosina | Matteo Pellegri | Dario Buono | A. Vacca | D. Buono | A. Senatore | E. Frosina | M. Pellegri
[1] H. Moosavi,et al. Flow irregularity and wear optimization in epitrochoidal gerotor pumps , 2012 .
[2] Adolfo Senatore,et al. A Tridimensional CFD Analysis of the Oil Pump of an High Performance Motorbike Engine , 2014 .
[3] Salvatore Manco,et al. Gerotor Lubricating Oil Pump for IC Engines , 1998 .
[4] Andrea Vacca,et al. A Lumped Parameter Approach for GEROTOR Pumps: Model Formulation and Experimental Validation , 2016 .
[5] S. Barbarelli,et al. Zero-dimensional Model and Pressure Data Analysis of a Variable-Displacement Lubricating Vane Pump , 2009 .
[6] H Ding,et al. A CFD model for orbital gerotor motor , 2012 .
[7] Faydor L. Litvin,et al. Computerized design and generation of cycloidal gearings , 1996 .
[8] Gordon R. Pennock,et al. Geometry for trochoidal-type machines with conjugate envelopes , 1994 .
[9] Chiu-Fan Hsieh,et al. Geometric Design for a Gerotor Pump With High Area Efficiency , 2007 .
[10] Esteve Codina,et al. Three-Dimensional Numerical Simulation of an External Gear Pump With Decompression Slot and Meshing Contact Point , 2015 .
[11] J. R Colbourne,et al. The geometry of trochoid envelopes and their application in rotary pumps , 1974 .
[12] Andrea Vacca,et al. Gerotor Pumps for Automotive Drivetrain Applications: A Multi Domain Simulation Approach , 2011 .
[13] Giovanni Mimmi,et al. Theoretical Analysis of Internal Lobe Pumps , 2007 .
[14] Faydor L. Litvin,et al. Geometry of a cycloidal pump , 2001 .
[15] Faydor L. Litvin,et al. Design and simulation of meshing of a cycloidal pump , 2002 .
[16] Donaldson McCloy,et al. Control of fluid power : analysis and design , 1980 .
[17] Sung-Yuen Jung,et al. Design of Rotor for Internal Gear Pump Using Cycloid and Circular-Arc Curves , 2012 .
[18] Sasa Cukovic,et al. Modeling of the Meshing of Trochoidal Profiles With Clearances , 2012 .
[19] Pedro-Javier Gamez-Montero,et al. Influence of the interteeth clearances on the flow ripple in a gerotor pump for engine lubrication , 2012 .
[20] Luigi Arnone,et al. A Tridimensional CFD Analysis of the Lubrication Circuit of a Non-Road Application Diesel Engine , 2013 .
[21] Chiu-Fan Hsieh,et al. Influence of Gerotor Performance in Varied Geometrical Design Parameters , 2009 .
[22] F. W. Ocvirk. Short-bearing approximation for full journal bearings , 1952 .
[23] Giovanni Mimmi,et al. Theoretical analysis of internal epitrochoidal and hypotrochoidal machines , 2009 .
[24] Salvatore Manco,et al. A Contribution to the Design of Hydraulic Lube Pumps , 2002 .
[25] Paolo Pennacchi,et al. Non Undercutting Conditions in Internal Gears , 2000 .
[26] Massimo Rundo,et al. CFD Analysis of Gerotor Lubricating Pumps at High Speed: Geometric Features Influencing the Filling Capability , 2015 .
[27] Chiu-Fan Hsieh,et al. Flow Characteristics of Gerotor Pumps With Novel Variable Clearance Designs , 2015 .
[28] Myeong-Kwan Park,et al. Design of port plate in gerotor pump for reduction of pressure pulsation , 2006 .
[29] Chul Kim,et al. Design and CFD analysis of gerotor with multiple profiles (ellipse–involute–ellipse type and 3-ellipses type) using rotation and translation algorithm , 2016 .
[30] J. Harrison,et al. Modeling Gerotor Oil Pumps in 1D to Predict Performance with Known Operating Clearances , 2016 .
[31] J. F. Booker. Dynamically Loaded Journal Bearings: Mobility Method of Solution , 1965 .