A power-efficient audio amplifier combining switching and linear techniques

Integrated class-D audio amplifiers are very power efficient but require an external LC reconstruction filter, which prevents further integration. Also due to this filter, large feedback factors are hard to realize, so that the load influences the distortion and transfer characteristics. The 30 W amplifier presented in this paper consists of a switching part that contains a much simpler filter and a linear part that ensures a low distortion and flat frequency response. The switching part of the amplifier was integrated in a BCD process. Combined with a linear part and with a loudspeaker as load, it has a flat frequency response /spl plusmn/0.3 dB, a dissipation that is up to five times lower than a traditional class-AB audio amplifier, and a distortion of <0.02% over power and frequency range.

[1]  Claudio Diazzi,et al.  A High Performance, High Efficiency Audio Subsystem for Car Ratio , 1985, IEEE Transactions on Consumer Electronics.

[2]  Henry Akiya,et al.  A Study of High-Efficiency Audio Power Amplifiers Using a Voltage Switching Method , 1984 .

[3]  Michael A. E. Andersen,et al.  High-Fidelity Pulse-Width Modulation Amplifiers Based on Novel Double-Loop Feedback Techniques , 1996 .

[4]  E. Botti,et al.  A high-efficiency 4/spl times/20 W monolithic audio amplifier for automobile radios using a complementary DMOS BCD technology , 1996, 1996 IEEE International Solid-State Circuits Conference. Digest of TEchnical Papers, ISSCC.

[5]  Keyue Smedley,et al.  A new extension of one-cycle control and its application to switching power amplifiers , 1995, Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC'95.

[6]  Jon Hancock.  A Class D Amplifier Using MOSFETs with Reduced Minority Carrier Lifetime , 1991 .

[7]  Shigeki Inoue,et al.  A High-Efficiency Audio Power Amplifier , 1981 .

[8]  Ronan van der Zee,et al.  A High Efficiency Low Distortion Audio Power Amplifier , 1997 .

[9]  Richard A. Greiner,et al.  The Spectral Amplitude Distribution of Selected Compact Discs , 1989 .

[10]  Brian E. Attwood.  Design Parameters Important for Optimization of Very High Fidelity PWM (Class D) Audio Amplifiers , 1983 .

[11]  Jieh-Tsorng Wu,et al.  A 100-MHz pipelined CMOS comparator , 1988 .

[12]  R. A. R. van der Zee,et al.  Test Signals for Measuring the Efficiency of Audio Amplifiers , 1998 .

[13]  F. Raab.  Average Efficiency of Class-G Power Amplifiers , 1986, IEEE Transactions on Consumer Electronics.

[14]  P. Buitendijk.  40 W Integrated Car Radio Audio Amplifier , 1991, 1991 IEEE International Conference on Consumer Electronics.

[15]  Seigoh Kashiwagi.  A High-Efficiency Audio Power Amplifier Using a Self-Oscillating Switching Regulator , 1985, IEEE Transactions on Industry Applications.