Analysis of Maximum Loadability of a Bus for Different Load Models using New Algorithms

Objective: Load modelling has a prominent place in present scenario of power systems research. In this paper various load models are considered for assessing maximum loadability using new algorithms. This has got a lot of significance in the voltage stability studies. Methods/Analysis: Generally constant representation of loads was considered. But the load characteristics significantly affect the power system’s performance. Constant models can not accurately describe the actual nature and behaviour of loads. Findings: Constant Power, Constant Impedance, Constant Current as well as composite (ZIP) load model are considered for assessing maximum loadability using a new algorithm. Constant Impedance, Constant Current Load models are established using node elimination technique. Application/Improvements: Case studies are conducted on IEEE 14 bus system with different load models and the test results are compared.

[1]  Alexandre de Assis Mota,et al.  Load modeling at electric power distribution substations using dynamic load parameters estimation , 2004 .

[2]  Saikat Chakrabarti.  STATIC LOAD MODELLING AND VOLTAGE STABILITY INDICES , 2009 .

[3]  Kwang Y. Lee,et al.  Improved Dynamic Load Model for Power system Stability Studies , 1982, IEEE Transactions on Power Apparatus and Systems.

[4]  C. Subramani,et al.  An Efficient Swarm Optimization Technique for Stability Analysis in IEEE – 14 Bus System , 2016 .

[5]  Ines Romero.  Dynamic Power System Load -Estimation of Parameters from Operational Data , 2005 .

[6]  C. W. Taylor,et al.  Standard load models for power flow and dynamic performance simulation , 1995 .

[7]  S. Chakrabarti,et al.  An experimental study on the load modelling using PMU measurements , 2014, 2014 IEEE PES T&D Conference and Exposition.

[8]  Kenan Hatipoglu,et al.  MATLAB based GUI to investigate effect of voltage changes on static ZIP load model in a microgrid , 2014, IEEE SOUTHEASTCON 2014.

[9]  Anton V. Prokhorov,et al.  Technique for field data based identification of static polynomial load model , 2014, 2014 International Conference on Mechanical Engineering, Automation and Control Systems (MEACS).

[10]  Babu Narayanan,et al.  POWER SYSTEM STABILITY AND CONTROL , 2015 .

[11]  Mohammad Reza Aghamohammadi,et al.  Effect of Distributed Generation Units on Stability Improving Trend of IEEE 14 and 34 Bus Test Network Voltage , 2016 .

[12]  M. Sadeghi,et al.  Determination of ZIP parameters with least squares optimization method , 2009, 2009 IEEE Electrical Power & Energy Conference (EPEC).

[13]  S. Chakrabarti,et al.  Classification and modelling of loads in power systems using SVM and optimization approach , 2015, 2015 IEEE Power & Energy Society General Meeting.

[14]  G. Gharehpetian,et al.  Studying Voltage Stability in Power System Considering Load Dynamics , 2013 .

[15]  F. Lange,et al.  A New Aggregation Method for Determining Composite Load Characteristics , 1982, IEEE Transactions on Power Apparatus and Systems.

[16]  S. C. Srivastava,et al.  Power system load modelling under large and small disturbances using phasor measurement units data , 2015 .