Towards strategies to mitigate degradation and regenerate performance of a solid oxide electrolyzer during co-electrolysis operation

[1]  N. Menzler,et al.  Experimental investigation of segmented SOECs: Locally-resolved impedance and degradation characteristics , 2022, International Journal of Hydrogen Energy.

[2]  F. Perera,et al.  Climate Change, Fossil-Fuel Pollution, and Children's Health. , 2022, The New England journal of medicine.

[3]  M. Abdelkareem,et al.  Renewable energy and climate change , 2022, Renewable and Sustainable Energy Reviews.

[4]  P. Hendriksen,et al.  An operation strategy for mitigating the degradation of solid oxide electrolysis cells for syngas production , 2021 .

[5]  C. Hochenauer,et al.  Performance Investigation and Optimization of a SOEC Stack Operated Under Industrially Relevant Conditions , 2021, ECS Meeting Abstracts.

[6]  C. Hochenauer,et al.  Experimental Investigation of Electrochemical Reactions Along SOFCs for Internal and External Reformed Methane , 2021, ECS Meeting Abstracts.

[7]  C. Hochenauer,et al.  Development of test protocols for solid oxide electrolysis cells operated under accelerated degradation conditions , 2021 .

[8]  Ð. Juričić,et al.  Condition monitoring of solid oxide fuel cells by fast electrochemical impedance spectroscopy: A case example of detecting deficiencies in fuel supply , 2021 .

[9]  C. Hochenauer,et al.  Holistic Approach to Design, Test, and Optimize Stand-Alone SOFC-Reformer Systems , 2021, Processes.

[10]  M. Sulprizio,et al.  Global mortality from outdoor fine particle pollution generated by fossil fuel combustion: Results from GEOS-Chem. , 2021, Environmental research.

[11]  C. Hochenauer,et al.  Performance assessment and evaluation of SOC stacks designed for application in a reversible operated 150 kW rSOC power plant , 2021 .

[12]  Ankica Kovač,et al.  Hydrogen in energy transition: A review , 2021, International Journal of Hydrogen Energy.

[13]  M. Zhang,et al.  Discharge performance recovery of a solid oxide fuel cell based on a prognostic-based control strategy , 2020 .

[14]  F. Overney,et al.  Application of electrochemical impedance spectroscopy to commercial Li-ion cells: A review , 2020, Journal of Power Sources.

[15]  Xingbo Liu,et al.  Comprehensive review of chromium deposition and poisoning of solid oxide fuel cells (SOFCs) cathode materials , 2020 .

[16]  Xingbo Liu,et al.  Degradation of solid oxide electrolysis cells: Phenomena, mechanisms, and emerging mitigation strategies—A review , 2020 .

[17]  B. Mathiesen,et al.  Recent advances in solid oxide cell technology for electrolysis , 2020, Science.

[18]  S. Jiang,et al.  Surface Segregation in Solid Oxide Cell Oxygen Electrodes: Phenomena, Mitigation Strategies and Electrochemical Properties , 2020, Electrochemical Energy Reviews.

[19]  E. Ivers-Tiffée,et al.  How the distribution of relaxation times enhances complex equivalent circuit models for fuel cells , 2020 .

[20]  Sun-Ju Song,et al.  Degradation studies of ceria-based solid oxide fuel cells at intermediate temperature under various load conditions , 2020 .

[21]  A. Hagen,et al.  Durability of solid oxide electrolysis stack under dynamic load cycling for syngas production , 2020, Journal of Power Sources.

[22]  A. Nakajo,et al.  Model-assisted identification of solid oxide cell elementary processes by electrochemical impedance spectroscopy measurements , 2019, Journal of Power Sources.

[23]  C. Hochenauer,et al.  Ammonia as Promising Fuel for Solid Oxide Fuel Cells: Experimental Analysis and Performance Evaluation , 2019, ECS Transactions.

[24]  P. Goyal,et al.  Recent advances in material and performance aspects of solid oxide fuel cells , 2019, Journal of Electroanalytical Chemistry.

[25]  S. Jensen,et al.  Unwinding Entangled Degradation Mechanisms in Solid Oxide Electrolysis Cells Through Electrode Modifications and Impedance Analysis , 2019, Fuel Cells.

[26]  Minfang Han,et al.  Comprehensive investigation of methane conversion over Ni(111) surface under a consistent DFT framework: Implications for anti-coking of SOFC anodes , 2019, Applied Surface Science.

[27]  Christoph Hochenauer,et al.  Towards practicable methods for carbon removal from Ni-YSZ anodes and restoring the performance of commercial-sized ASC-SOFCs after carbon deposition induced degradation , 2018, Energy Conversion and Management.

[28]  Minfang Han,et al.  Cell-protecting regeneration from anode carbon deposition using in situ produced oxygen and steam: A combined experimental and theoretical study , 2018, Journal of Materials Science & Technology.

[29]  Jong‐Won Lee,et al.  Syngas production in high performing tubular solid oxide cells by using high-temperature H2O/CO2 co-electrolysis , 2018 .

[30]  C. Graves,et al.  Reactivating the Ni-YSZ electrode in solid oxide cells and stacks by infiltration , 2018 .

[31]  C. Graves,et al.  Re-activation of degraded nickel cermet anodes - Nano-particle formation via reverse current pulses , 2018 .

[32]  Srikanth Gopalan,et al.  Mitigation of chromium poisoning of cathodes in solid oxide fuel cells employing CuMn1.8O4 spinel coating on metallic interconnect , 2018 .

[33]  Werner Lehnert,et al.  Performance and degradation of an SOEC stack with different cell components , 2017 .

[34]  Minfang Han,et al.  Performance and electrochemical analysis of solid oxide fuel cells based on LSCF-YSZ nano-electrode , 2017 .

[35]  Tong Liu,et al.  High temperature solid oxide H2O/CO2 co-electrolysis for syngas production , 2017 .

[36]  A. Michaelis,et al.  Optimization of ESC Performance for Co-Electrolysis Operation , 2017 .

[37]  C. Hochenauer,et al.  CFD-simulation of effective carbon gasification strategies from high temperature SOFC Ni–YSZ cermet anodes , 2017 .

[38]  A. Modjtahedi,et al.  Diffusion-limited electrochemical oxidation of H2/CO on Ni-anode catalyst in a CH4/CO2-solid oxide fuel cell , 2016 .

[39]  Sun-Ju Song,et al.  Robust NdBa 0.5 Sr 0.5 Co 1.5 Fe 0.5 O 5+δ cathode material and its degradation prevention operating logic for intermediate temperature-solid oxide fuel cells , 2016 .

[40]  M. Mogensen,et al.  Ni/YSZ electrodes structures optimized for increased electrolysis performance and durability , 2016 .

[41]  Christoph Hochenauer,et al.  Analysis of possibilities for carbon removal from porous anode of solid oxide fuel cells after different failure modes , 2016 .

[42]  Christoph Hochenauer,et al.  Anode regeneration following carbon depositions in an industrial-sized anode supported solid oxide fuel cell operating on synthetic diesel reformate , 2015 .

[43]  Nigel P. Brandon,et al.  Carbon deposition behaviour in metal-infiltrated gadolinia doped ceria electrodes for simulated biogas upgrading in solid oxide electrolysis cells , 2015 .

[44]  Francesco Ciucci,et al.  Analysis of Electrochemical Impedance Spectroscopy Data Using the Distribution of Relaxation Times: A Bayesian and Hierarchical Bayesian Approach , 2015 .

[45]  Ludger Blum,et al.  Performance and Degradation of Solid Oxide Electrolysis Cells in Stack , 2015 .

[46]  S. Jensen,et al.  Eliminating degradation in solid oxide electrochemical cells by reversible operation. , 2015, Nature Materials.

[47]  Meilin Liu,et al.  Deactivation of nickel-based anode in solid oxide fuel cells operated on carbon-containing fuels , 2014 .

[48]  N P Brandon,et al.  A Raman spectroscopic study of the carbon deposition mechanism on Ni/CGO electrodes during CO/CO2 electrolysis. , 2014, Physical chemistry chemical physics : PCCP.

[49]  Wei Zhang,et al.  Carbon Nanotube Growth on Nanozirconia under Strong Cathodic Polarization in Steam and Carbon Dioxide , 2014 .

[50]  A. Brisse,et al.  A Review and Comprehensive Analysis of Degradation Mechanisms of Solid Oxide Electrolysis Cells , 2013 .

[51]  J. Hill,et al.  In Situ Raman Studies of Carbon Removal from High Temperature Ni–YSZ Cermet Anodes by Gas Phase Reforming Agents , 2013 .

[52]  Mina Hoorfar,et al.  Study of proton exchange membrane fuel cells using electrochemical impedance spectroscopy technique – A review , 2013 .

[53]  Nigel P. Brandon,et al.  In-Operando Raman Spectroscopy Study of Passivation Effects on Ni-CGO Electrodes in CO2 Electrolysis Conditions , 2013 .

[54]  J. Bentzen,et al.  High Temperature Co‐Electrolysis of Steam and CO2 in an SOC Stack: Performance and Durability , 2013 .

[55]  Prabhakar Singh,et al.  Mitigation of the delamination of LSM anode in solid oxide electrolysis cells using manganese-modified YSZ , 2013 .

[56]  Van Nhu Nguyen,et al.  Long-term tests of a Jülich planar short stack with reversible solid oxide cells in both fuel cell and electrolysis modes , 2013 .

[57]  Yu Luo,et al.  Experimental characterization and modeling of the electrochemical reduction of CO2 in solid oxide electrolysis cells , 2013 .

[58]  J. O’Brien,et al.  Improved durability of SOEC stacks for high temperature electrolysis , 2013 .

[59]  Meng Ni,et al.  2D thermal modeling of a solid oxide electrolyzer cell (SOEC) for syngas production by H2O/CO2 co-electrolysis , 2012 .

[60]  M. Laguna-Bercero.  Recent advances in high temperature electrolysis using solid oxide fuel cells: A review , 2012 .

[61]  S. Ebbesen,et al.  Co-electrolysis of CO2 and H2O in solid oxide cells: Performance and durability , 2011 .

[62]  A. Hagen,et al.  Ni/YSZ electrode degradation studied by impedance spectroscopy — Effect of p(H2O) , 2011 .

[63]  Meng Ni,et al.  Thermo-electrochemical modeling of ammonia-fueled solid oxide fuel cells considering ammonia thermal decomposition in the anode , 2011 .

[64]  Mogens Bjerg Mogensen,et al.  Poisoning of Solid Oxide Electrolysis Cells by Impurities , 2010 .

[65]  S. Ebbesen,et al.  Solid Oxide Electrolysis Cells: Degradation at High Current Densities , 2010 .

[66]  E. Ivers-Tiffée,et al.  Impedance Study of Alternative ( La , Sr ) FeO3 − δ and ( La , Sr ) ( Co , Fe ) O3 − δ MIEC Cathode Compositions , 2010 .

[67]  S. Ebbesen,et al.  Electrolysis of carbon dioxide in Solid Oxide Electrolysis Cells , 2009 .

[68]  S. Jensen,et al.  Solid Oxide Electrolysis Cells: Microstructure and Degradation of the Ni/Yttria-Stabilized Zirconia Electrode , 2008 .

[69]  Ellen Ivers-Tiffée,et al.  Combined Deconvolution and CNLS Fitting Approach Applied on the Impedance Response of Technical Ni ∕ 8YSZ Cermet Electrodes , 2008 .

[70]  J. O’Brien,et al.  Carbon Dioxide Recycling by High Temperature Co-electrolysis and Hydrocarbon Synthesis , 2008 .

[71]  M. Fowler,et al.  Performance comparison of Fick’s, dusty-gas and Stefan–Maxwell models to predict the concentration overpotential of a SOFC anode , 2003 .

[72]  Mark E. Orazem,et al.  Application of Measurement Models to Impedance Spectroscopy III . Evaluation of Consistency with the Kramers‐Kronig Relations , 1995 .

[73]  C. Hochenauer,et al.  In operando electrochemical impedance spectroscopy monitoring of nickel catalysts for hydrogen production, Part I: Methodology and performance characterization , 2022, Fuel.

[74]  Christoph Hochenauer,et al.  Characterization and performance study of commercially available solid oxide cell stacks for an autonomous system , 2020 .

[75]  T. Kåberger.  Progress of renewable electricity replacing fossil fuels , 2018 .

[76]  K. Yoon,et al.  Degradation of anode-supported solid oxide fuel cells under load trip and cycle conditions and their degradation prevention operating logic , 2018 .

[77]  C. Graves,et al.  Carbon deposition and sulfur poisoning during CO2 electrolysis in nickel-based solid oxide cell electrodes , 2018 .

[78]  S. Jiang,et al.  Review—Materials Degradation of Solid Oxide Electrolysis Cells , 2016 .

[79]  C. Graves,et al.  Quantitative review of degradation and lifetime of solid oxide cells and stacks , 2016 .

[80]  Christoph Hochenauer,et al.  Strategy for Carbon Gasification from Porous Ni-YSZ Anodes of Industrial-Sized ASC-SOFCs and Effects of Carbon Growth , 2016 .

[81]  S. Ebbesen,et al.  Carbon Deposition in Solid Oxide Cells during Co-Electrolysis of H2O and CO2 , 2014 .