Magnetic Marker Localization System Using a Super-Low-Frequency Signal

In this paper, a magnetic marker localization system using a super-low-frequency signal-around 100 Hz-is proposed for a surgical navigation system. This method avoids the effect of eddy currents flowing inside metallic surgical tools. The frequency dependence of the magnetic field distortion and localization error due to eddy currents were simulated to determine the optimum signal frequency. From the results of the simulation, the influence of eddy currents on the magnetic marker localization can be insignificant below 1 kHz. The prototype system used marker signals at 94 and 143 Hz and comprised 16-channel fluxgate magnetometers. Markers were successfully localized and the developed system was operational even though metal tools were present in the observation area.

[1]  E. Paperno,et al.  Three-dimensional magnetic tracking of biaxial sensors , 2004, IEEE Transactions on Magnetics.

[2]  U. Mezger,et al.  Navigation in surgery , 2013, Langenbeck's Archives of Surgery.

[3]  Ziv Yaniv,et al.  Electromagnetic tracking in the clinical environment. , 2009, Medical physics.

[4]  Peter Anderson,et al.  Method for estimating dynamic EM tracking accuracy of surgical navigation tools , 2006, SPIE Medical Imaging.

[5]  G Uehara,et al.  Improvement of SQUID Magnetometer System for Extending Application of Spinal Cord Evoked Magnetic Field Measurement , 2011, IEEE Transactions on Applied Superconductivity.

[6]  Gen Uehara,et al.  Calibration for a Multichannel Magnetic Sensor Array of a Magnetospinography System , 2014, IEEE Transactions on Magnetics.

[7]  Y. Adachi,et al.  Electric Current Imaging by Ultrasonography and SQUID Magnetometry , 2011, IEEE Transactions on Applied Superconductivity.