Comparison of the Ranking Capabilities of the Long-Term Discomfort Indices

The scientific literature and some standards offer a number of methods for the long-term evaluation of the general thermal comfort conditions in buildings and indices for predicting the likelihood of summer overheating in the indoor environment. Such metrics might be useful tools for operational assessment of thermal comfort in existing buildings, for driving the optimization process of a new building, or for optimizing the operation of building systems. Focusing exclusively on the summer period, 16 long-term discomfort indices have been applied for assessing 54 different variants of a large office building. Such 54 building variants were obtained by combining different performance levels of four key-parameters of the building envelope: (i) insulation and airtightness (ii) solar factor of glazing units (iii) exposed thermal mass and (iv) night natural ventilation strategies. The calculated values of the 16 indices were compared in order to identify their similarities and differences. The indices returned different results in ranking the 54 variants and hence, when used to drive an optimization process of a building design, they would identify different building variants as the optimal ones. Suggestions for improvement of the indices and their use are drawn from this analysis.

[1]  Alain Bastide,et al.  Optimizing opening dimensions for naturally ventilated buildings , 2011 .

[2]  Kostas Kalaitzakis,et al.  Genetic algorithms optimized fuzzy controller for the indoor environmental management in buildings implemented using PLC and local operating networks , 2002 .

[3]  Kamel Ghali,et al.  Optimal control strategy for a multi-zone air conditioning system using a genetic algorithm , 2009 .

[4]  Gail Brager,et al.  Comfort Exceedance Metrics in Mixed-Mode Buildings , 2010 .

[5]  P Pieter-Jan Hoes,et al.  Optimizing building designs using a robustness indicator with respect to user behavior , 2011 .

[6]  Caterina Di Perna,et al.  Influence of the internal inertia of the building envelope on summertime comfort in buildings with h , 2011 .

[7]  Jacob Cohen.  Statistical Power Analysis for the Behavioral Sciences , 1969, The SAGE Encyclopedia of Research Design.

[8]  Thomas Rbement,et al.  Fundamentals of quality control and improvement , 1993 .

[9]  Michaël Kummert,et al.  Simulation of a model-based optimal controller for heating systems under realistic hypothesis , 2005 .

[10]  George N Walton,et al.  Thermal Analysis Research Program reference manual , 1983 .

[11]  Valerio Lo Brano,et al.  Is the transfer function method reliable in a European building context? A theoretical analysis and a case study in the south of Italy , 2005 .

[12]  F. Nicol,et al.  Maximum temperatures in European office buildings to avoid heat discomfort , 2007 .

[13]  Daniel E. Fisher,et al.  Energyplus: New, capable, and linked , 2004 .

[14]  Baruch Givoni,et al.  Options and applications of passive cooling , 1984 .

[15]  P. Fanger,et al.  Extension of the PMV model to non-air-conditioned buildings in warm climates , 2002 .

[16]  J. F. Nicol,et al.  Suggestion for new approach to overheating diagnostics , 2009 .

[17]  Michael A. Humphreys,et al.  ADAPTIVE THERMAL COMFORT AND SUSTAINABLE THERMAL STANDARDS FOR BUILDINGS , 2002 .

[18]  Jlm Jan Hensen,et al.  EXPLORING THE POTENTIAL OF CLIMATE ADAPTIVE BUILDING SHELLS , 2011 .

[19]  Gregor P. Henze,et al.  A model predictive control optimization environment for real-time commercial building application , 2013 .

[20]  Lorenzo Pagliano,et al.  Evaluation of energy savings related to building envelope retrofit techniques and ventilation strategies for low energy cooling in offices and commercial sector , 2010 .

[21]  Ala Hasan,et al.  Applying a multi-objective optimization approach for Design of low-emission cost-effective dwellings , 2011 .

[22]  Darren Robinson,et al.  Model to predict overheating risk based on an electrical capacitor analogy , 2008 .

[23]  Lorenzo Pagliano,et al.  Comfort models and cooling of buildings in the Mediterranean zone , 2010 .

[24]  Shengwei Wang,et al.  Model-based optimal control of VAV air-conditioning system using genetic algorithm , 2000 .

[25]  G. Solaini,et al.  Summer cooling by earth-to-water heat exchangers: experimental results and optimisation by dynamic simulation , 2004 .

[26]  Michael C. Mozer,et al.  The Neurothermostat: Predictive Optimal Control of Residential Heating Systems , 1996, NIPS.

[27]  George N Walton,et al.  AIRNET - a computer program for building airflow network modeling , 1989 .

[28]  Robert Sabourin,et al.  Optimization of HVAC Control System Strategy Using Two-Objective Genetic Algorithm , 2005 .

[29]  Guillaume Polidori,et al.  Modelling of natural convective heat transfer at an internal surface , 2006 .

[30]  P Pieter-Jan Hoes,et al.  User behavior in whole building simulation , 2009 .

[31]  Robert Sabourin,et al.  Two-objective on-line optimization of supervisory control strategy , 2004 .

[32]  Nader Sadegh,et al.  Real-time optimization of a double-skin facade based on lumped modeling and occupant preference , 2004 .

[33]  Fariborz Haghighat,et al.  Multiobjective optimization of building design using TRNSYS simulations, genetic algorithm, and Artificial Neural Network , 2010 .

[34]  George Walton,et al.  CONTAM 2.1 supplemental user guide and program documentation , 2003 .

[35]  R. Dedear.  Developing an adaptive model of thermal comfort and preference , 1998 .

[36]  Christina J. Hopfe,et al.  Evaluating optimization methodologies for future integration in building performance tools , 2008 .

[37]  Geoffrey P. Hammond,et al.  Improved data correlations for buoyancy-driven convection in rooms , 1983 .