A piezoresistive accelerometer with a novel vertical beam structure

A beam-mass piezoresistive micro-accelerometer sensitive to acceleration components in the chip plane and vertical to the beam direction has been developed. The beam is in the <100> direction with sidewalls vertical to the [001] wafer surface. The top side of the beam is widened slightly to make enough room to accommodate the piezoresistors. Therefore, the beam has a T-shaped cross-section. Two n-type piezoresistors on the top side of the beam, forming a half bridge, serve as sensing elements. The sensitivity of the device is about 0.5 mv/g/5v and the resonant frequency is about 1.2 kHz.

[1]  Byung Man Kwak,et al.  Slide film damping in laterally driven microstructures , 1994 .

[2]  L.M. Roylance,et al.  A batch-fabricated silicon accelerometer , 1979, IEEE Transactions on Electron Devices.

[3]  H. V. Allen,et al.  Accelerometer systems with self-testable features , 1989 .

[4]  Gert Andersson,et al.  A Novel 3-axis Monolithic Silicon Accelerometer , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[5]  Shen Shaoqun,et al.  A micromechanical structure eliminating lateral effect of silicon accelerometer , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.