Surface Coverage and SEI Induced Electrochemical Surface Stress Changes during Li Deposition in a Model System for Li-Ion Battery Anodes
暂无分享,去创建一个
Maria K. Y. Chan | David G. Cahill | Andrew A. Gewirth | D. Cahill | M. Chan | A. Gewirth | Hadi Tavassol | J. Greeley | Hadi Tavassol | Maria G. Catarello | Jeffery P. Greeley
[1] Amartya Mukhopadhyay,et al. Thin film graphite electrodes with low stress generation during Li-intercalation , 2011 .
[2] M. Seo,et al. Changes in Surface Stress of Gold Electrode during Underpotential Deposition of Pb , 2004 .
[3] U. Bertocci,et al. In situ stress and nanogravimetric measurements during underpotential deposition of bismuth on (111)-textured Au. , 2006, The journal of physical chemistry. B.
[4] Benito Jose Marinas,et al. Absorption of water in the active layer of reverse osmosis membranes , 2009 .
[5] Scheffler,et al. Reconstruction mechanism of fcc transition metal (001) surfaces. , 1993, Physical review letters.
[6] Kurt Maute,et al. Stress generation in silicon particles during lithium insertion , 2010 .
[7] C. E. Bach,et al. Potential-induced stress in the solid-liquid interface: Au(111) and Au(100) in an HClO4 electrolyte , 1997 .
[8] Yue Qi,et al. Elastic softening of amorphous and crystalline Li–Si Phases with increasing Li concentration: A first-principles study , 2010 .
[9] Kresse,et al. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. , 1996, Physical review. B, Condensed matter.
[10] W. Haiss,et al. Adsorbate-induced surface stress at the solid|electrolyte interface measured with an STM , 1995 .
[11] Xiaofeng Qian,et al. Lithiation-induced embrittlement of multiwalled carbon nanotubes. , 2011, ACS nano.
[12] O. Magnussen. Ordered anion adlayers on metal electrode surfaces. , 2002, Chemical reviews.
[13] R. Li,et al. Tin Oxide with Controlled Morphology and Crystallinity by Atomic Layer Deposition onto Graphene Nanosheets for Enhanced Lithium Storage , 2012 .
[14] Amartya Mukhopadhyay,et al. Stress development due to surface processes in graphite electrodes for Li-ion batteries: A first report , 2012 .
[15] C. Wolverton,et al. First principles simulations of the electrochemical lithiation and delithiation of faceted crystalline silicon. , 2012, Journal of the American Chemical Society.
[16] Christopher M Wolverton,et al. Electrical energy storage for transportation—approaching the limits of, and going beyond, lithium-ion batteries , 2012 .
[17] H. Ibach,et al. Adsorbate‐induced surface stress , 1994 .
[18] Stephen J. Harris,et al. In Situ Observation of Strains during Lithiation of a Graphite Electrode , 2010 .
[19] G. Stafford,et al. In Situ Stress Measurements During Al UPD onto (111)-Textured Au from AlCl3 – EMImCl Ionic Liquid , 2008 .
[20] H. Monkhorst,et al. SPECIAL POINTS FOR BRILLOUIN-ZONE INTEGRATIONS , 1976 .
[21] A. Damjanović,et al. Differential surface tension measurements at thin solid metal electrodes , 1971 .
[22] Huajian Gao,et al. Improved cycling stability of silicon thin film electrodes through patterning for high energy density lithium batteries , 2011 .
[23] Kyung Yoon Chung,et al. Investigation of Structural Fatigue in Spinel Electrodes Using In Situ Laser Probe Beam Deflection Technique , 2002 .
[24] C. Thompson,et al. Anion adsorption induced reversal of coherency strain. , 2005, Physical review letters.
[25] Hans-Jürgen Butt,et al. A Sensitive Method to Measure Changes in the Surface Stress of Solids , 1996 .
[26] Venkat Srinivasan,et al. In situ measurements of stress evolution in silicon thin films during electrochemical lithiation and delithiation , 2010, 1108.0647.
[27] D. Aurbach,et al. Investigation of the electrochemical windows of aprotic alkali metal (Li, Na, K) salt solutions , 2001 .
[28] G. Staikov,et al. Underpotential alloy formation in the system Ag(hkl)/Cd2+ , 1983 .
[29] U. Bertocci,et al. In Situ Stress Measurements during Copper Electrodeposition on (111)-Textured Au , 2005 .
[30] R. Nuzzo,et al. Observation of Uniaxial Structures of Underpotentially Deposited Cadmium on Au(111) with in Situ Scanning Tunneling Microscopy , 1996 .
[31] W. Haiss,et al. Quantitative Surface Stress Measurements on Au(111) Electrodes by Scanning Tunneling Microscopy , 1996 .
[32] G. Valinčius. Elastic electrocapillary properties of polycrystalline gold , 1998 .
[33] M. Seo,et al. Changes in Surface Stress of Platinum Electrode in Acidic and Alkaline Sulfate or Alkaline Fluoride Solutions , 2003 .
[34] B. Carré,et al. Imidazolium-organic solvent mixtures as electrolytes for lithium batteries , 2005 .
[35] Zunger,et al. Surface segregation and ordering in III-V semiconductor alloys. , 1996, Physical review. B, Condensed matter.
[36] Brandon R. Long,et al. The First-Cycle Electrochemical Lithiation of Crystalline Ge: Dopant and Orientation Dependence and Comparison with Si , 2011 .
[37] Jian Yu Huang,et al. Size-dependent fracture of silicon nanoparticles during lithiation. , 2011, ACS nano.
[38] J. M. Rosolen,et al. Stress in Carbon Film Electrodes during Li + Electrochemical Intercalation , 1996 .
[39] M. Fujihira,et al. Calibration of surface stress measurements with atomic force microscopy , 1997 .
[40] Burke,et al. Generalized Gradient Approximation Made Simple. , 1996, Physical review letters.
[41] P. Oden,et al. In-situ STM investigation of Tl and Pb underpotential deposition on chemically polished Ag(111) electrodes , 1995 .
[42] U. Bertocci,et al. In Situ Stress and Nanogravimetric Measurements During Underpotential Deposition of Pb on (111)-Textured Au , 2007 .
[43] M. Seo,et al. Changes in surface stress of gold electrode during underpotential deposition of copper , 2007 .
[44] Joo-Young Go,et al. An investigation of intercalation-induced stresses generated during lithium transport through Li1 − δCoO2 film electrode using a laser beam deflection method , 2004 .
[45] Venkat Srinivasan,et al. In Situ Measurements of Stress-Potential Coupling in Lithiated Silicon , 2010 .
[46] M. Verbrugge,et al. Modeling diffusion-induced stress in nanowire electrode structures , 2010 .
[47] R. Nichols,et al. In situ monitoring of intrinsic stress changes during copper electrodeposition on Au(111) , 1997 .
[48] Joo-Young Go,et al. Investigation of Stresses Generated during Lithium Transport through the RF Sputter-Deposited Li1 − δ CoO2 Film by a DQCR Technique , 2003 .
[49] Claus Daniel,et al. A study of lithium ion intercalation induced fracture of silicon particles used as anode material in Li-ion battery , 2011 .
[50] J. Nørskov,et al. Phase diagrams for surface alloys , 1997 .
[51] L. Curtiss,et al. Solvent Oligomerization during SEI Formation on Model Systems for Li-Ion Battery Anodes , 2012 .
[52] J. Dahn,et al. On the Reduction of Lithium Insertion Capacity in Hard‐Carbon Anode Materials with Increasing Heat‐Treatment Temperature , 1998 .
[53] Xin Zhao,et al. Materials for rechargeable lithium-ion batteries. , 2012, Annual review of chemical and biomolecular engineering.
[54] Daniel P. Abraham,et al. Real-Time Stress Measurements in Lithium-ion Battery Negative-electrodes , 2012 .
[55] U. Bardi. The atomic structure of alloy surfaces and surface alloys , 1994 .
[56] P. Gatenholm,et al. Controlled interactions in cellulose‐polymer composites. 1: Effect on mechanical properties , 1993 .
[57] F. Ducastelle,et al. Generalized cluster description of multicomponent systems , 1984 .
[58] M. Seo,et al. A combined piezoelectric and EQCM study of underpotential deposition of silver on gold electrodes , 1994 .
[59] M. Blanco-Rey,et al. Surface stress in d-band metal surfaces , 2010, Journal of physics. Condensed matter : an Institute of Physics journal.
[60] R. Nichols,et al. Linear correlation between surface stress and surface charge in anion adsorption on Au(111) , 1998 .
[61] D. Cahill,et al. Absorption of Water and Mechanical Stress in Immobilized Poly(vinylbenzyltrialkylammonium chloride) Thin Films , 2012 .
[62] Andrzej Lewandowski,et al. Ionic liquids as electrolytes for Li-ion batteries—An overview of electrochemical studies , 2009 .
[63] Y. Gofer,et al. Simultaneous microgravimetric and optical reflectivity studies of lithium underpotential deposition on Au(111) from propylene carbonate electrolytes , 1996 .
[64] W. Haiss,et al. Surface stress of clean and adsorbate-covered solids , 2001 .
[65] J. Dahn,et al. Combinatorial Study of the Sn-Cu-C System for Li-Ion Battery Negative Electrode Materials , 2010 .
[66] M. Seo,et al. Study of Adsorption of Iodide Ions on Gold Electrode by a Laser‐Beam Deflection Method Compared with a Piezoelectric Technique , 1999 .
[67] K. Uosaki,et al. Surface Film Formation and Lithium Underpotential Deposition on Au(111) Surfaces in Propylene Carbonate : In Situ Scanning Tunneling Microscopy Study , 2003 .
[68] Allan F. Bower,et al. A finite strain model of stress, diffusion, plastic flow, and electrochemical reactions in a lithium-ion half-cell , 2011 .
[69] Mark W. Verbrugge,et al. Stress and Strain-Energy Distributions within Diffusion-Controlled Insertion-Electrode Particles Subjected to Periodic Potential Excitations , 2009 .
[70] Xingcheng Xiao,et al. Thickness effects on the lithiation of amorphous silicon thin films , 2011 .
[71] John C. Slater,et al. Atomic Radii in Crystals , 1964 .
[72] Doron Aurbach,et al. The electrochemistry of noble metal electrodes in aprotic organic solvents containing lithium salts , 1991 .
[73] Zhigang Suo,et al. Lithium-assisted Plastic Deformation of Silicon Electrodes in Lithium-ion Batteries: a First-principles Theoretical Study , 2022 .
[74] M. Stevens. Interfacial Fracture between Highly Cross-Linked Polymer Networks and a Solid Surface: Effect of Interfacial Bond Density , 2001 .
[75] V Srinivasan,et al. Real-time measurement of stress and damage evolution during initial lithiation of crystalline silicon. , 2011, Physical review letters.
[76] G. Kresse,et al. From ultrasoft pseudopotentials to the projector augmented-wave method , 1999 .
[77] Brandon R. Long,et al. Strain Anisotropies and Self‐Limiting Capacities in Single‐Crystalline 3D Silicon Microstructures: Models for High Energy Density Lithium‐Ion Battery Anodes , 2011 .
[78] A. Y. Gokhshtein. The Estance Method , 1975 .