Effects of electrostatic discharges on bearing grease electric properties

Bearing faults may significantly reduce the useful life of electric machines. With the advent of modern fast-switching frequency converters, electric currents induced by the high-frequency common-mode voltage of these converters have been recognized as additional, sometimes severe, contributors to bearing degradation. The degradation is understood to progress both by damaging bearing surfaces and by altering the chemical composition of lubrication greases, which can lead to ineffective lubrication and reduction in permissible mechanical bearing load. This paper studies the effect of grease degradation due to discharge currents on the grease electric properties of several greases typically used with electric drives.

[1]  Karl Pearson F.R.S..  X. On the criterion that a given system of deviations from the probable in the case of a correlated system of variables is such that it can be reasonably supposed to have arisen from random sampling , 2009 .

[2]  H. Tischmacher,et al.  Bearing currents in converter operation , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[3]  P. Lugt,et al.  Grease Degradation in R0F Bearing Tests , 2007 .

[4]  Doyle F. Busse,et al.  The effects of PWM voltage source inverters on the mechanical performance of rolling bearings , 1997 .

[5]  Eugene A. Irene,et al.  Electronic Properties of Materials , 2005 .

[6]  M.J. Melfi,et al.  Bearing current remediation options , 2004, IEEE Industry Applications Magazine.

[7]  P. J. Link,et al.  Minimizing electric bearing currents in ASD systems , 1999 .

[8]  Annette Muetze,et al.  Practical Rules for Assessment of Inverter-Induced Bearing Currents in Inverter-Fed AC Motors up to 500 kW , 2007, IEEE Transactions on Industrial Electronics.

[9]  Thomas A. Lipo,et al.  Modeling of motor bearing currents in PWM inverter drives , 1995 .

[10]  H. E. Boyanton,et al.  Bearing fluting [motors] , 2002 .

[11]  A. Muetze,et al.  Don't lose your bearings , 2006, IEEE Industry Applications Magazine.

[12]  W. Ostwald.  Ueber die rechnerische Darstellung des Strukturgebietes der Viskosität , 1929 .

[13]  Annette Muetze,et al.  Study of incipient bearing damage monitoring in variable-speed drive systems , 2014, 2014 16th European Conference on Power Electronics and Applications.

[14]  A. Binder,et al.  Scaling Effects of Inverter-Induced Bearing Currents in AC Machines , 2008, IEEE Transactions on Industry Applications.

[15]  B. Ponick,et al.  Influence of bearing currents on the bearing lifetime for converter driven machines , 2012, 2012 XXth International Conference on Electrical Machines.

[16]  William Liu.  The prevalent motor bearing premature failures due to the high frequency electric current passage , 2014 .

[17]  K. Pearson.  On the Criterion that a Given System of Deviations from the Probable in the Case of a Correlated System of Variables is Such that it Can be Reasonably Supposed to have Arisen from Random Sampling , 1900 .

[18]  A. Muetze,et al.  Don’t lose your bearings – Mitigation techniques for bearing currents in inverter-supplied drive systems , 2006 .

[19]  M. Dalva,et al.  A survey of faults on induction motors in offshore oil industry, petrochemical industry, gas terminals and oil refineries , 1994, Proceedings of IEEE Petroleum and Chemical Industry Technical Conference (PCIC '94).

[20]  Mohamed Benbouzid,et al.  Bibliography on induction motors faults detection and diagnosis , 1999 .

[21]  Thomas A. Lipo,et al.  Source of induction motor bearing currents caused by PWM inverters , 1996 .