Creep response of GFRP–concrete hybrid structures: Application to a footbridge prototype

Glass fibre reinforced polymer (GFRP) pultruded profiles have been increasingly used in civil engineering structural applications in the past few decades owing to their high strength, low weight and corrosion resistance. Nevertheless, the low material moduli, which makes design most often governed by deformability and instability phenomena, the brittle failure mechanisms and the high initial costs, have been delaying their widespread use. Hybrid GFRP–concrete structural solutions have been proposed to overcome the aforementioned limitations, namely the low material moduli. Furthermore, GFRP material creep models suggest that such hybrid structures may reduce the creep deformations when compared to full GFRP structures. In this context, this paper presents experimental and analytical investigations about the creep behaviour of a hybrid GFRP–concrete footbridge comprising two I-shaped GFRP pultruded profiles and a thin deck made of steel fibre reinforced self-compacting concrete (SFRSCC). The experiments comprised flexural creep tests on a 6.0 m long footbridge prototype subjected to a uniformly distributed load for up to 2642 h, during which deflections and axial deformations were monitored. In order to assess the influence of loading and environmental conditions on the creep behaviour of the structural system, the prototype was tested for three different combinations of load levels and seasons. Experimental results showed that (i) GFRP–concrete hybrid structures lead to a considerable decrease of the creep deformations of GFRP structures and that (ii) environmental conditions significantly influence the viscoelastic response of these hybrid structures. The models proposed, based on the creep response of the constituent materials, were able to predict the observed structural response for the different load levels and environmental conditions with very good accuracy. Therefore, they are proposed to predict the long-term response of GFRP–concrete structures instead of empirical models based on short-term experimental data.

[1]  Luigi Ascione,et al.  Lateral buckling of pultruded FRP beams , 2011 .

[2]  T. Keller,et al.  Flexural behavior of a hybrid FRP and lightweight concrete sandwich bridge deck , 2007 .

[3]  J. Clarke.  Structural design of polymer composites : EUROCOMP design code and handbook , 1996 .

[4]  David Hui,et al.  Creep rupture of a GFRP composite at elevated temperatures , 2000 .

[5]  David W. Scott,et al.  Creep Behavior of Fiber-Reinforced Polymeric Composites: A Review of the Technical Literature , 1995 .

[6]  Fernando A. Branco,et al.  Dynamic response under pedestrian load of a GFRP–SFRSCC hybrid footbridge prototype: Experimental tests and numerical simulation , 2013 .

[7]  Fernando A. Branco,et al.  Flexural behaviour of GFRP-concrete hybrid beams with interconnection slip , 2007 .

[8]  J. Hall,et al.  Combined FRP Reinforcement and Permanent Formwork for Concrete Members , 1998 .

[9]  A. Mosallam,et al.  Mechanical behavior of web-flange junctions of thin-walled pultruded I-profiles: an experimental and numerical evaluation , 2013 .

[10]  L. Ascione,et al.  Creep phenomena in FRP materials , 2012 .

[11]  Thomas Keller,et al.  System ductility and redundancy of FRP beam structures with ductile adhesive joints , 2005 .

[12]  Carl R. Schultheisz,et al.  Effects of environmental aging on the properties of pultruded GFRP , 1999 .

[13]  José Sena-Cruz,et al.  Development of a pedestrian bridge with GFRP profiles and fiber reinforced self-compacting concrete deck , 2011 .

[14]  Fernando A. Branco,et al.  Glass Fibre Reinforced Polymer Pultruded Flexural Members: Assessment of Existing Design Methods , 2010 .

[15]  Fernando A. Branco,et al.  First-order, buckling and post-buckling behaviour of GFRP pultruded beams. Part 1: Experimental study , 2011 .

[16]  K. F. Chung,et al.  Composite column design to Eurocode 4 : based on DD ENV 1994-1-1: 1994 Eurocode 4: design of composite steel and concrete structures: part 1.1: general rules and rules for buildings , 1994 .

[17]  H. Garmestani,et al.  Viscoplastic analysis of structural polymer composites using stress relaxation and creep data , 2001 .

[18]  Sami H. Rizkalla,et al.  Flexural Behavior of Concrete-Filled Fiber-Reinforced Polymer Circular Tubes , 2002 .

[19]  Fernando A. Branco,et al.  Fire protection systems for building floors made of pultruded GFRP profiles: Part 1: Experimental investigations , 2010 .

[20]  L Hollaway,et al.  The use of advanced polymer composites to form an economic structural unit , 2003 .

[21]  Nuno Silvestre,et al.  Creep behavior of pultruded GFRP elements - Part 1: Literature review and experimental study , 2011 .

[22]  J. R. Correia,et al.  Fire behaviour of reinforced concrete beams strengthened with CFRP laminates: Protection systems with insulation of the anchorage zones , 2012 .

[23]  Fernando A. Branco,et al.  Artificial Accelerated Ageing of GFRP Pultruded Profiles Made of Polyester and Vinylester Resins: Characterisation of Physical–Chemical and Mechanical Damage , 2012 .

[24]  Nuno Silvestre,et al.  Creep behavior of pultruded GFRP elements - Part 2: Analytical study , 2011 .

[25]  L. Feo,et al.  An experimental study on the long-term behavior of CFRP pultruded laminates suitable to concrete structures rehabilitation , 2008 .

[26]  L. Bank.  Composites for Construction: Structural Design with FRP Materials , 2006 .

[27]  Stephen P. Timoshenko,et al.  Vibration problems in engineering , 1928 .

[28]  Fernando A. Branco,et al.  Flexural behaviour of multi-span GFRP-concrete hybrid beams , 2009 .

[29]  João R. Correia,et al.  GFRP–concrete hybrid cross-sections for floors of buildings , 2009 .

[30]  Urs Meier,et al.  Innovative Design of FRP Combined with Concrete: Long-Term Behavior , 1995 .