Poly(vinyl pyrrolidone)-modified metal oxide anode interlayers for stable organic solar cells

Abstract. A new generation of anode interlayers (AILs) has been introduced in recent years for improving the efficiency and stability of organic solar cell (OSC) devices. Electrode interlayer modification is a simple and effective way of enhancing OSC device performance. We used poly(vinyl pyrrolidone) (PVP) as an AIL modifier to alter molybdenum trioxide (MoO3) and vanadium pentoxide (V2O5) AILs in OSC devices and compared them with pure metal oxide AILs. Using this modification, average power conversion efficiencies were raised from 5.2  %    ±  0.4  %   to 6.0  %    ±  0.3  %   for OSCs with MoO3-based AILs, and from 6.2  %    ±  0.1  %   to 6.8  %    ±  0.3  %   for OSCs with V2O5-based AILs. Moreover, the PVP-metal oxide AILs also improved the overall device quality, producing a nanotextured morphology with good optical properties and favorable chemical composition. Beneficial wetting properties for interfacial adhesion between anode and active layer are observed using contact angle measurements. Overall, devices with PVP-modified metal oxide AILs showed promising results with greater device stability compared to pure metal oxide AIL-based OSC devices.

[1]  Mats Andersson,et al.  Polymer Photovoltaic Cells with Conducting Polymer Anodes , 2002 .

[2]  G. Fang,et al.  Organic solar cells based on a Cu2O/FBT-TH4 anode buffer layer with enhanced power conversion efficiency and ambient stability , 2017 .

[3]  Jing Guo,et al.  Simple O2 plasma-processed V2O5 as an anode buffer layer for high-performance polymer solar cells. , 2015, ACS applied materials & interfaces.

[4]  John R. Reynolds,et al.  Solution‐Processed Nickel Oxide Hole Transport Layers in High Efficiency Polymer Photovoltaic Cells , 2013 .

[5]  Xiong Gong,et al.  Efficient, Air‐Stable Bulk Heterojunction Polymer Solar Cells Using MoOx as the Anode Interfacial Layer , 2011, Advanced materials.

[6]  V. S. Reddy,et al.  Solution processed transition metal oxide anode buffer layers for efficiency and stability enhancement of polymer solar cells , 2018 .

[7]  C. Powell,et al.  The NIST x‐ray photoelectron spectroscopy database , 1992 .

[8]  Fengxian Xie,et al.  MoOx and V2Ox as hole and electron transport layers through functionalized intercalation in normal and inverted organic optoelectronic devices , 2015, Light: Science & Applications.

[9]  Z. Yin,et al.  Solution-derived poly(ethylene glycol)-TiOx nanocomposite film as a universal cathode buffer layer for enhancing efficiency and stability of polymer solar cells , 2015, Nano Research.

[10]  Y. Geng,et al.  Printable highly conductive conjugated polymer sensitized ZnO NCs as cathode interfacial layer for efficient polymer solar cells. , 2014, ACS applied materials & interfaces.

[11]  Chih‐Ping Chen,et al.  High‐Performance and Highly Durable Inverted Organic Photovoltaics Embedding Solution‐Processable Vanadium Oxides as an Interfacial Hole‐Transporting Layer , 2011, Advanced materials.

[12]  J. Park,et al.  Control of the electrode work function and active layer morphology via surface modification of indium tin oxide for high efficiency organic photovoltaics , 2007 .

[13]  H. Rubahn,et al.  Crystalline Molybdenum Oxide Thin-Films for Application as Interfacial Layers in Optoelectronic Devices. , 2017, ACS applied materials & interfaces.

[14]  W. Whang,et al.  Hollow V₂O₅ Nanoassemblies for High-Performance Room-Temperature Hydrogen Sensors. , 2015, ACS applied materials & interfaces.

[15]  P. Yu,et al.  13% efficiency hybrid organic/silicon-nanowire heterojunction solar cell via interface engineering. , 2013, ACS nano.

[16]  A. Jen,et al.  Toward Perovskite Solar Cell Commercialization: A Perspective and Research Roadmap Based on Interfacial Engineering , 2018, Advanced materials.

[17]  T. Sritharan,et al.  Investigating the multiple roles of polyvinylpyrrolidone for a general methodology of oxide encapsulation. , 2013, Journal of the American Chemical Society.

[18]  G. Coulston,et al.  Characterization of VPO Catalysts by X-Ray Photoelectron Spectroscopy , 1996 .

[19]  Rui M. Almeida,et al.  Influence of solvent concentration on the microstructure of SiO2−TiO2 sol-gel films , 1997 .

[20]  V. Mihailetchi,et al.  Photocurrent generation in polymer-fullerene bulk heterojunctions. , 2004, Physical review letters.

[21]  Nathan A. Cooling,et al.  The origin of performance limitations in miniemulsion nanoparticulate organic photovoltaic devices , 2018 .

[22]  Qun Luo,et al.  Zinc oxide: Conjugated polymer nanocomposite as cathode buffer layer for solution processed inverted organic solar cells , 2015 .

[23]  Z. Yin,et al.  Interface control of semiconducting metal oxide layers for efficient and stable inverted polymer solar cells with open-circuit voltages over 1.0 volt. , 2013, ACS applied materials & interfaces.

[24]  F. Krebs,et al.  Stability/degradation of polymer solar cells , 2008 .

[25]  T. Riedl,et al.  Solution Processed Vanadium Pentoxide as Charge Extraction Layer for Organic Solar Cells , 2011 .

[26]  John R. Tumbleston,et al.  Understanding the Morphology of PTB7:PCBM Blends in Organic Photovoltaics , 2014 .

[27]  S. Dou,et al.  Hierarchical orthorhombic V2O5 hollow nanospheres as high performance cathode materials for sodium-ion batteries , 2014 .

[28]  Jens Meyer,et al.  MoO3 Films Spin‐Coated from a Nanoparticle Suspension for Efficient Hole‐Injection in Organic Electronics , 2011, Advanced materials.

[29]  Yongfang Li,et al.  High‐Performance Inverted Polymer Solar Cells with Solution‐Processed Titanium Chelate as Electron‐Collecting Layer on ITO Electrode , 2012, Advanced materials.

[30]  A. Heeger,et al.  Conductive Conjugated Polyelectrolyte as Hole‐Transporting Layer for Organic Bulk Heterojunction Solar Cells , 2014, Advanced materials.

[31]  Andrés J. García,et al.  Low-temperature, solution-processed molybdenum oxide hole-collection layer for organic photovoltaics , 2012 .

[32]  L. Froyen,et al.  Ultrathin ammonium heptamolybdate films as efficient room-temperature hole transport layers for organic solar cells. , 2014, ACS applied materials & interfaces.

[33]  F. Krebs,et al.  MoO3–Au composite interfacial layer for high efficiency and air-stable organic solar cells , 2013 .

[34]  V. Roy,et al.  Pre- and post-treatments free nanocomposite based hole transport layer for high performance organic solar cells with considerably enhanced reproducibility , 2017 .

[35]  Tianmo Liu,et al.  Morphology-controllable synthesis and gas-sensing properties of α-MoO3 , 2013, Journal of Materials Science: Materials in Electronics.

[36]  S. Ochiai,et al.  Performance evaluation of PTB7 : PC71BM based organic solar cells fabricated by spray coating method using chlorine free solvent , 2015 .

[37]  Seeram Ramakrishna,et al.  Enhancing the stability of polymer solar cells by improving the conductivity of the nanostructured MoO3 hole-transport layer. , 2013, Physical chemistry chemical physics : PCCP.

[38]  Fan Li,et al.  Efficient bulk heterojunction polymer solar cells using PEDOT/PSS doped with solution-processed MoO3 as anode buffer layer , 2012 .

[39]  U. Würfel,et al.  In Situ Formation of MoO3 in PEDOT:PSS Matrix: A Facile Way to Produce a Smooth and Less Hygroscopic Hole Transport Layer for Highly Stable Polymer Bulk Heterojunction Solar Cells , 2013 .

[40]  Wei Lin Leong,et al.  Solution-processed small-molecule solar cells with 6.7% efficiency. , 2011, Nature materials.

[41]  Seok‐In Na,et al.  Moderately reduced graphene oxide as hole transport layer in polymer solar cells via thermal assisted spray process , 2014 .

[42]  J. Xiong,et al.  High alcohol-soluble MoOx gel for interfacial layer in organic solar cells , 2017 .

[43]  K. Wong,et al.  All-room-temperature solution-processed new nanocomposites based hole transport layer from synthesis to film formation for high-performance organic solar cells towards ultimate energy-efficient fabrication , 2018 .

[44]  Michael E. A. Warwick,et al.  The Application of Electric Fields to Aerosol Assisted Chemical Vapor Deposition Reactions , 2011 .

[45]  M. Seah,et al.  Auger and x-ray photoelectron spectroscopy , 1990 .

[46]  Alex B. F. Martinson,et al.  Anode Interfacial Tuning via Electron‐Blocking/Hole‐Transport Layers and Indium Tin Oxide Surface Treatment in Bulk‐Heterojunction Organic Photovoltaic Cells , 2010 .

[47]  Wallace W. H. Wong,et al.  A Green Route to Conjugated Polyelectrolyte Interlayers for High-Performance Solar Cells. , 2017, Angewandte Chemie.

[48]  Chang-Qi Ma,et al.  A low-cost and low-temperature processable zinc oxide-polyethylenimine (ZnO:PEI) nano-composite as cathode buffer layer for organic and perovskite solar cells , 2016 .

[49]  Ping Liu,et al.  Facile Approach to Preparing a Vanadium Oxide Hydrate Layer as a Hole-Transport Layer for High-Performance Polymer Solar Cells. , 2017, ACS applied materials & interfaces.

[50]  T. Pullerits,et al.  Enhanced performance of inverted polymer solar cells by using poly(ethylene oxide)-modified ZnO as an electron transport layer. , 2013, ACS applied materials & interfaces.

[51]  Andrés J. García,et al.  Directly patternable, highly conducting polymers for broad applications in organic electronics , 2010, Proceedings of the National Academy of Sciences.

[52]  F. Liu,et al.  Efficient polymer photovoltaic cells using solution-processed MoO3 as anode buffer layer , 2010 .

[53]  Yi Cui,et al.  Realization of 13.6% Efficiency on 20 μm Thick Si/Organic Hybrid Heterojunction Solar Cells via Advanced Nanotexturing and Surface Recombination Suppression. , 2015, ACS nano.

[54]  Kourosh Kalantar-Zadeh,et al.  Exfoliation Solvent Dependent Plasmon Resonances in Two-Dimensional Sub-Stoichiometric Molybdenum Oxide Nanoflakes. , 2016, ACS applied materials & interfaces.

[55]  Tae-Wook Kim,et al.  Evolution of nanomorphology and anisotropic conductivity in solvent-modified PEDOT:PSS films for polymeric anodes of polymer solar cells , 2009 .

[56]  Seok‐In Na,et al.  Brush painted V2O5 hole transport layer for efficient and air-stable polymer solar cells , 2015 .

[57]  Gang Li,et al.  25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research , 2013, Advanced materials.

[58]  S. Clément,et al.  Molecular design of interfacial layers based on conjugated polythiophenes for polymer and hybrid solar cells , 2017 .

[59]  A. Heeger,et al.  A Solution‐Processed MoOx Anode Interlayer for Use within Organic Photovoltaic Devices , 2012 .

[60]  John R. Reynolds,et al.  High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells , 2011, Nature Photonics.

[61]  Zheng-Hong Lu,et al.  Universal energy-level alignment of molecules on metal oxides. , 2011, Nature materials.

[62]  Evolution of oxidation states in vanadium-based catalysts under conventional XPS conditions , 2005 .

[63]  A. Bishop,et al.  Electrospun single-crystal MoO_3 nanowires for biochemistry sensing probes , 2006 .

[64]  Xiong Gong,et al.  Room-Temperature, Solution-Processed MoOx Thin Film as a Hole Extraction Layer to Substitute PEDOT/PSS in Polymer Solar Cells , 2014 .

[65]  Seok‐In Na,et al.  Efficient and Flexible ITO‐Free Organic Solar Cells Using Highly Conductive Polymer Anodes , 2008 .

[66]  Franky So,et al.  Properties of interlayer for organic photovoltaics , 2013 .

[67]  A. Iwan,et al.  Electrochemical and photocurrent characterization of polymer solar cells with improved performance after GO addition to the PEDOT:PSS hole transporting layer , 2017 .

[68]  Lingliang Li,et al.  Enhancing the performance and stability of organic solar cells using solution processed MoO3 as hole transport layer , 2017 .

[69]  E. Kymakis,et al.  Highly efficient organic photovoltaic devices utilizing work-function tuned graphene oxide derivatives as the anode and cathode charge extraction layers , 2016 .

[70]  Wenkai Zhong,et al.  Achieving over 16% efficiency for single-junction organic solar cells , 2019, Science China Chemistry.