Design, simulation and optimization of a compound parabolic collector

Abstract In this study, the optical and the thermal performance of a compound parabolic collector (CPC) with evacuated tube are presented. In the first part, the optimization of the reflector geometry is given and in the next part the thermal analysis of the solar collector is presented. The design of the reflector has a great impact on the solar energy exploitation and for this reason is analyzed in detail. In the thermal analysis of the collector, the two most usual thermal fluids, the pressurized water and typical thermal oil, are compared. Pressurized water performs better and it is the most suitable working fluid for transferring the heat because of its properties; something that is analyzed in this study. Moreover, the optical efficiency of the collector for various solar angles (longitude and transverse) is investigated and the heat flux distribution over the absorber is given. In the last part, the temperature distribution over the absorber and inside the fluid are presented and a simple validation of the thermal model is also presented. The model is designed in commercial software Solidworks and simulated in its flow simulation studio.

[1]  Li Jing,et al.  Design and analysis of a novel low-temperature solar thermal electric system with two-stage collectors and heat storage units , 2011 .

[2]  Seth R. Sanders,et al.  Low-cost distributed solar-thermal-electric power generation , 2004, SPIE Optics + Photonics.

[3]  Mervyn Smyth,et al.  Heat retaining integrated collector storage solar water heater with asymmetric CPC reflector , 2011 .

[4]  K. Devanarayanan,et al.  Integrated collector storage solar water heater with compound parabolic concentrator – development and progress , 2014 .

[5]  Soteris A. Kalogirou,et al.  The potential of solar industrial process heat applications , 2003 .

[6]  Yuvaraj Pandian,et al.  Parabolic trough collector testing in the frame of the REACt project , 2008 .

[7]  Yong Sin Kim,et al.  Efficient stationary solar thermal collector systems operating at a medium-temperature range , 2013 .

[8]  Ji Jie,et al.  Experiment and simulation study on the flux distribution of lens-walled compound parabolic concentrator compared with mirror compound parabolic concentrator , 2013 .

[9]  Aldo Steinfeld,et al.  Performance of compound parabolic concentrators with polygonal apertures , 2013 .

[10]  Firdaus Muhammad-Sukki,et al.  Rotationally asymmetrical compound parabolic concentrator for concentrating photovoltaic applications , 2014 .

[11]  Jyeshtharaj B. Joshi,et al.  Performance analysis of a novel and cost effective CPC system , 2013 .

[12]  Zhou Xi,et al.  Experimental study and exergetic analysis of a CPC-type solar water heater system using higher-temperature circulation in winter , 2012 .

[13]  Chiheb Bouden,et al.  Numerical and experimental study of an integrated solar collector with CPC reflectors , 2013 .

[14]  A. Rabl.  Optical and thermal properties of Compound Parabolic Concentrators , 1975 .

[15]  Fabienne Sallaberry,et al.  Optical losses due to tracking error estimation for a low concentrating solar collector , 2015 .

[16]  Eckhard Lüpfert,et al.  Advances in Parabolic Trough Solar Power Technology , 2002 .

[17]  Roland Winston,et al.  A stationary evacuated collector with integrated concentrator , 1984 .

[18]  Roland Winston,et al.  Principles of solar concentrators of a novel design , 1974 .

[19]  A. Suzuki,et al.  Performance evaluation of two-dimensional compound elliptic lens concentrators using a yearly distributed insolation model , 1999 .

[20]  Saad Mekhilef,et al.  A review on solar energy use in industries , 2011 .

[21]  Yong Kim,et al.  An evaluation on thermal performance of CPC solar collector , 2008 .

[22]  Soteris A. Kalogirou,et al.  Solar thermal collectors and applications , 2004 .

[23]  Gang Pei,et al.  Comparative study on annual solar energy collection of a novel lens-walled compound parabolic concentrator (lens-walled CPC) , 2012 .

[24]  J. Clark,et al.  A thermal-optical analysis of a compound parabolic concentrator for single and multiphase flows, including superheat , 1987 .

[25]  Robert A. Taylor,et al.  Analysis of a New Compound Parabolic Concentrator-Based Solar Collector Designed for Methanol Reforming , 2014 .

[26]  Nagamany Nirmalakhandan,et al.  Low temperature desalination using solar collectors augmented by thermal energy storage , 2012 .

[27]  J. H. Lucio,et al.  Evaluation of thermal parameters and simulation of a solar-powered, solid-sorption chiller with a CPC collector , 2009 .

[28]  Li Yang,et al.  Performance analysis of a novel sun-tracking CPC heat pipe evacuated tubular collector , 2015 .

[29]  Dimitrios M. Korres,et al.  Thermal and optical efficiency investigation of a parabolic trough collector , 2015 .

[30]  Roberto Grena,et al.  Optical simulation of a parabolic solar trough collector , 2010 .

[31]  N. E. Wijeysundera,et al.  A numerical study of the natural convection in CPC solar collector cavities with tubular absorbers , 1989 .

[32]  Matteo Chiesa,et al.  Solar assisted method for recovery of bitumen from oil sand , 2009 .

[33]  Chiheb Bouden,et al.  Numerical Simulation, Design, and Construction of a Double Glazed Compound Parabolic Concentrators-Type Integrated Collector Storage Water Heater , 2016 .

[34]  Ramkishore Singh,et al.  Recent developments in integrated collector storage (ICS) solar water heaters: A review , 2016 .

[35]  A. Harmim,et al.  Performance study of a box-type solar cooker employing an asymmetric compound parabolic concentrator , 2012 .