Think outside the box: 3D bioprinting concepts for biotechnological applications - recent developments and future perspectives.

[1]  F. Mahmud,et al.  Microalgae biofuels production: A systematic review on socioeconomic prospects of microalgae biofuels and policy implications , 2021 .

[2]  S. Nandi,et al.  Immobilization of transgenic plant cells towards bioprinting for production of a recombinant biodefense agent , 2021, Biotechnology journal.

[3]  Estela O. Carvalho,et al.  Exploring electroactive microenvironments in polymer-based nanocomposites to sensitize bacterial cells to low-dose embedded silver nanoparticles. , 2021, Acta biomaterialia.

[4]  G. Poologasundarampillai,et al.  Real-time imaging and analysis of cell-hydrogel interplay within an extrusion-bioprinting capillary , 2021, Bioprinting.

[5]  M. Tenje,et al.  In-Line Analysis of Organ-on-Chip Systems with Sensors: Integration, Fabrication, Challenges, and Potential , 2021, ACS biomaterials science & engineering.

[6]  Zihe Liu,et al.  Yeasts as microbial cell factories for sustainable production of biofuels , 2021 .

[7]  A. Avni,et al.  Coupled microalgal–bacterial biofilm for enhanced wastewater treatment without energy investment , 2021 .

[8]  Xiongbiao Chen,et al.  Noninvasive Three-Dimensional In Situ and In Vivo Characterization of Bioprinted Hydrogel Scaffolds Using the X-ray Propagation-Based Imaging Technique. , 2021, ACS applied materials & interfaces.

[9]  H. J. Wagner,et al.  Synthetic biology as driver for the biologization of materials sciences , 2021, Materials today. Bio.

[10]  D. Kelly,et al.  Measuring and Modeling Oxygen Transport and Consumption in 3D Hydrogels Containing Chondrocytes and Stem Cells of Different Tissue Origins , 2021, Frontiers in Bioengineering and Biotechnology.

[11]  R. Reis,et al.  Engineering next-generation bioinks with nanoparticles: moving from reinforcement fillers to multifunctional nanoelements. , 2021, Journal of materials chemistry. B.

[12]  S. Bordel,et al.  Inspired by nature: Microbial production, degradation and valorization of biodegradable bioplastics for life-cycle-engineered products. , 2021, Biotechnology advances.

[13]  Steven Smriga,et al.  Denitrifying bacteria respond to and shape microscale gradients within particulate matrices , 2021, Communications biology.

[14]  Juan F Yee-de León,et al.  High-Throughput and Continuous Chaotic Bioprinting of Spatially Controlled Bacterial Microcosms. , 2021, ACS biomaterials science & engineering.

[15]  S. Habtemariam,et al.  Bioproduction process of natural products and biopharmaceuticals: Biotechnological aspects. , 2021, Biotechnology advances.

[16]  H. Fischer,et al.  Multiscale 3D Bioprinting by Nozzle-Free Acoustic Droplet Ejection. , 2021, Small methods.

[17]  X. Intes,et al.  Luminescence lifetime imaging of three-dimensional biological objects. , 2021, Journal of cell science.

[18]  N. Simões,et al.  3D printing in the construction industry - A systematic review of the thermal performance in buildings , 2021 .

[19]  A. Meyer,et al.  Bioprinting of Regenerative Photosynthetic Living Materials , 2021, Advanced Functional Materials.

[20]  E. Suuronen,et al.  Mimicking biofilm formation and development: Recent progress in in vitro and in vivo biofilm models , 2021, iScience.

[21]  Nicola R. Stanley-Wall,et al.  Bacillus subtilis biofilm formation and social interactions , 2021, Nature Reviews Microbiology.

[22]  J. Herr,et al.  Lichens and biofilms: Common collective growth imparts similar developmental strategies , 2021 .

[23]  Ashley L. Beckwith,et al.  Tunable plant-based materials via in vitro cell culture using a Zinnia elegans model , 2021 .

[24]  Stephen P. Mayfield,et al.  Recent advancements in the genetic engineering of microalgae , 2021 .

[25]  M. Diender,et al.  Synthetic co-cultures: novel avenues for bio-based processes. , 2021, Current opinion in biotechnology.

[26]  Sherri M. Cook,et al.  Engineering living building materials for enhanced bacterial viability and mechanical properties , 2021, iScience.

[27]  H. Peter,et al.  Morphogenesis and oxygen dynamics in phototrophic biofilms growing across a gradient of hydraulic conditions , 2021, iScience.

[28]  Amit Ghosh,et al.  Recent advances in systems and synthetic biology approaches for developing novel cell-factories in non-conventional yeasts. , 2021, Biotechnology advances.

[29]  Gary S. Caldwell,et al.  Photosynthetic textile biocomposites: Using laboratory testing and digital fabrication to develop flexible living building materials , 2021 .

[30]  M. Kühl,et al.  Hyperspectral Luminescence Imaging in Combination with Signal Deconvolution Enables Reliable Multi-Indicator-Based Chemical Sensing. , 2020, ACS sensors.

[31]  Keerthan Poologanathan,et al.  Sustainable and Renewable Bio-Based Natural Fibres and Its Application for 3D Printed Concrete: A Review , 2020, Sustainability.

[32]  Nicholas A. Peppas,et al.  Engineering precision nanoparticles for drug delivery , 2020, Nature reviews. Drug discovery.

[33]  Guido Viscardi,et al.  Functional Dyes in Polymeric 3D Printing: Applications and Perspectives , 2020, ACS Materials Letters.

[34]  W. Srubar.  Engineered Living Materials: Taxonomies and Emerging Trends. , 2020, Trends in biotechnology.

[35]  Y. S. Zhang,et al.  Symbiotic Photosynthetic Oxygenation within 3D-Bioprinted Vascularized Tissues. , 2020, Matter.

[36]  Niels Peter Revsbech,et al.  Simple sensors that work in diverse natural environments: The micro-Clark sensor and biosensor family , 2020 .

[37]  W. Yeong,et al.  Bioprinting of Collagen: Considerations, Potentials, and Applications. , 2020, Macromolecular bioscience.

[38]  Qiang Ding,et al.  Microbial cell engineering to improve cellular synthetic capacity. , 2020, Biotechnology advances.

[39]  M. Kühl,et al.  Imaging O2 dynamics and microenvironments in the seagrass leaf phyllosphere with magnetic optical sensor nanoparticles. , 2020, The Plant journal : for cell and molecular biology.

[40]  Michael Gelinsky,et al.  Can 3D bioprinting be a key for exploratory missions and human settlements on the Moon and Mars? , 2020, Biofabrication.

[41]  S. Logsetty,et al.  Highly sensitive bacteria-responsive membranes consisting of core-shell polyurethane polyvinylpyrrolidone electrospun nanofibers for in situ detection of bacterial infections. , 2020, ACS applied materials & interfaces.

[42]  R. Stocker,et al.  PhenoChip: A single-cell phenomic platform for high-throughput photophysiological analyses of microalgae , 2020, Science Advances.

[43]  A. Urbanska,et al.  Electrospinning for tissue engineering applications , 2020 .

[44]  Ahasanul Karim,et al.  Kluyveromyces marxianus: An emerging yeast cell factory for applications in food and biotechnology. , 2020, International journal of food microbiology.

[45]  Z. Ren,et al.  Biofilm Matrixome: Extracellular Components in Structured Microbial Communities. , 2020, Trends in microbiology.

[46]  Xiaohong Wang,et al.  Synthetic Polymers for Organ 3D Printing , 2020, Polymers.

[47]  Yusef D. Khesuani,et al.  3D Bioprinting: The Roller Coaster Ride to Commercialization , 2020, International journal of bioprinting.

[48]  Ziyan Zheng,et al.  Immobilization of laccase by 3D bioprinting and its application in the biodegradation of phenolic compounds. , 2020, International journal of biological macromolecules.

[49]  G. Gigli,et al.  Probing the pH Microenvironment of Mesenchymal Stromal Cell Cultures on Additive-Manufactured Scaffolds. , 2020, Small.

[50]  Trevor G. Johnston,et al.  Cell-Laden Hydrogels for Multikingdom 3D Printing. , 2020, Macromolecular bioscience.

[51]  Mohamed Shehata Draz,et al.  3D bioprinting: A powerful tool to leverage tissue engineering and microbial systems , 2020, Bioprinting.

[52]  Jing Yang,et al.  Quantifying Oxygen Levels in 3D Bioprinted Cell-Laden Thick Constructs with Perfusable Microchannel Networks , 2020, Polymers.

[53]  A. Mikos,et al.  Polymeric Systems for Bioprinting. , 2020, Chemical reviews.

[54]  Jonathan D. Taylor,et al.  NMR insights into the pre-amyloid ensemble and secretion targeting of the curli subunit CsgA , 2020, Scientific Reports.

[55]  Ling Ye,et al.  Nanozyme-catalyzed oxygen release from calcium peroxide nanoparticles for accelerated hypoxia relief and image-guided super-efficient photodynamic therapy. , 2020, Biomaterials science.

[56]  Lorenzo Moroni,et al.  Bio-Fabrication: Convergence of 3D Bioprinting and Nano-Biomaterials in Tissue Engineering and Regenerative Medicine , 2020, Frontiers in Bioengineering and Biotechnology.

[57]  P. Perré,et al.  A review of high value-added molecules production by microalgae in light of the classification. , 2020, Biotechnology advances.

[58]  T Ahlfeld,et al.  Methylcellulose - a versatile printing material that enables biofabrication of tissue equivalents with high shape fidelity. , 2020, Biomaterials science.

[59]  H. Park,et al.  Callus-based 3D printing for food exemplified with carrot tissues and its potential for innovative food production , 2020 .

[60]  Z. Pei,et al.  3D Printing of Biomass-Fungi Composite Material: A Preliminary Study , 2020 .

[61]  Yang Li,et al.  Magnetotactic bacteria: Characteristics and environmental applications , 2020, Frontiers of Environmental Science & Engineering.

[62]  M. Koffas,et al.  Recent advances in modular co-culture engineering for synthesis of natural products. , 2020, Current opinion in biotechnology.

[63]  C. Niemeyer,et al.  Cultivation of Exoelectrogenic Bacteria in Conductive DNA Nanocomposite Hydrogels Yields a Programmable Biohybrid Materials System. , 2020, ACS applied materials & interfaces.

[64]  A. Lode,et al.  Engineering considerations on extrusion-based bioprinting: interactions of material behavior, mechanical forces and cells in the printing needle , 2020, Biofabrication.

[65]  J. Malda,et al.  From Shape to Function: The Next Step in Bioprinting , 2020, Advanced materials.

[66]  Ibrahim T. Ozbolat,et al.  The bioprinting roadmap , 2020, Biofabrication.

[67]  James M. Wagner,et al.  Compartmentalized microbes and co-cultures in hydrogels for on-demand bioproduction and preservation , 2020, Nature Communications.

[68]  Wil V. Srubar,et al.  Biomineralization and Successive Regeneration of Engineered Living Building Materials , 2020, Matter.

[69]  Lakshmi Machineni.  Effects of biotic and abiotic factors on biofilm growth dynamics and their heterogeneous response to antibiotic challenge , 2020, Journal of Biosciences.

[70]  Chee Kai Chua,et al.  Publication Trends in 3D Bioprinting and 3D Food Printing , 2020, International journal of bioprinting.

[71]  Tom Ellis,et al.  Living materials with programmable functionalities grown from engineered microbial co-cultures , 2019, bioRxiv.

[72]  Guangming Zhang,et al.  Photosynthetic bacteria wastewater treatment with the production of value-added products: A review. , 2019, Bioresource technology.

[73]  J. Martín-Pascual,et al.  Moving bed biofilm reactor as an alternative wastewater treatment process for nutrient removal and recovery in the circular economy model. , 2019, Bioresource technology.

[74]  Jie Zhou,et al.  Biotechnological potential and applications of microbial consortia. , 2019, Biotechnology advances.

[75]  Pedro Miguel Lavrador,et al.  Advanced Bottom‐Up Engineering of Living Architectures , 2019, Advanced materials.

[76]  V. Srivastava,et al.  3D Bioprinting in Plant Science: An Interdisciplinary Approach. , 2019, Trends in plant science.

[77]  B. Parker,et al.  Robotic Extrusion of Algae‐Laden Hydrogels for Large‐Scale Applications , 2019, Global challenges.

[78]  Gulden Camci-Unal,et al.  Breathing life into engineered tissues using oxygen-releasing biomaterials , 2019, NPG Asia Materials.

[79]  M. Hildebrand,et al.  Bionic 3D printed corals , 2019, Nature Communications.

[80]  Stefan Dietze,et al.  Microalgae wastewater treatment: Biological and technological approaches , 2019, Engineering in life sciences.

[81]  B. Liu,et al.  Extraction and purification of eicosapentaenoic acid and docosahexaenoic acid from microalgae: A critical review , 2019, Algal Research.

[82]  Lingchong You,et al.  Emerging strategies for engineering microbial communities. , 2019, Biotechnology advances.

[83]  F. Picard,et al.  3D bioprinting of mature bacterial biofilms for antimicrobial resistance drug testing , 2019, Biofabrication.

[84]  Rémi Courson,et al.  Fabrication of 3D scaffolds reproducing intestinal epithelium topography by high-resolution 3D stereolithography. , 2019, Biomaterials.

[85]  Leo Hsu,et al.  'Living' Inks for 3D Bioprinting. , 2019, Trends in biotechnology.

[86]  D. Kaplan,et al.  3D Printing of Functional Microalgal Silk Structures for Environmental Applications. , 2019, ACS biomaterials science & engineering.

[87]  K. J. Grande-Allen,et al.  Monitoring Oxygen Levels within Large, Tissue-Engineered Constructs Using Porphyin-Hydrogel Microparticles. , 2019, ACS biomaterials science & engineering.

[88]  P. Couvreur,et al.  Light sheet fluorescent microscopy versus confocal microscopy: in quest of a suitable tool to assess drug and nanomedicine penetration into multicellular tumor spheroids. , 2019, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[89]  S. Levenberg,et al.  Tissue Engineering for Clean Meat Production , 2019, Front. Sustain. Food Syst..

[90]  Zhilian Yue,et al.  Quantitative ultrasound imaging of cell-laden hydrogels and printed constructs. , 2019, Acta biomaterialia.

[91]  S. Willerth,et al.  Bioprinting a novel glioblastoma tumor model using a fibrin-based bioink for drug screening , 2019, Materials Today Chemistry.

[92]  A. Meyer,et al.  Three-dimensional Patterning of Engineered Biofilms with a Do-it-yourself Bioprinter. , 2019, Journal of visualized experiments : JoVE.

[93]  S. Gharavi,et al.  Ecological role of Acinetobacter calcoaceticus GSN3 in natural biofilm formation and its advantages in bioremediation , 2019, Biofouling.

[94]  Chee Kai Chua,et al.  3D food printing: a categorised review of inks and their development , 2019, Virtual and Physical Prototyping.

[95]  Yong‐Su Jin,et al.  Production of biofuels and chemicals from xylose using native and engineered yeast strains. , 2019, Biotechnology advances.

[96]  Dongxu Ke,et al.  Current Challenges of Bioprinted Tissues Toward Clinical Translation. , 2019, Tissue engineering. Part B, Reviews.

[97]  M. Kühl,et al.  Luminescence Lifetime Imaging of Chemical Sensors-A Comparison between Time-Domain and Frequency-Domain Based Camera Systems. , 2019, Analytical chemistry.

[98]  Christopher A. Voigt,et al.  Resilient living materials built by printing bacterial spores , 2019, bioRxiv.

[99]  J. Stolaroff,et al.  Direct Writing of Tunable Living Inks for Bioprocess Intensification. , 2019, Nano letters.

[100]  S. Jacques,et al.  Optical Properties of Corals Distort Variable Chlorophyll Fluorescence Measurements1 , 2019, Plant Physiology.

[101]  Michael Kühl,et al.  Nanoparticle- and microparticle-based luminescence imaging of chemical species and temperature in aquatic systems: a review , 2019, Microchimica Acta.

[102]  Ke Li,et al.  Programmable and printable Bacillus subtilis biofilms as engineered living materials , 2018, Nature Chemical Biology.

[103]  M Gelinsky,et al.  A definition of bioinks and their distinction from biomaterial inks , 2018, Biofabrication.

[104]  Fan Liu,et al.  Natural Polymers for Organ 3D Bioprinting , 2018, Polymers.

[105]  Lu Zhang,et al.  3D printing of cereal-based food structures containing probiotics , 2018, Food Structure.

[106]  A. Lode,et al.  Functionalized Bioink with Optical Sensor Nanoparticles for O2 Imaging in 3D‐Bioprinted Constructs , 2018, Advanced Functional Materials.

[107]  Carlos Osuna,et al.  Agarose-Based Hydrogels as Suitable Bioprinting Materials for Tissue Engineering. , 2018, ACS biomaterials science & engineering.

[108]  Zhien Zhang,et al.  Immobilization of microbial cells for the biotreatment of wastewater: A review , 2018, Environmental Chemistry Letters.

[109]  Patrik R. Jones,et al.  Synthetic metabolic pathways for photobiological conversion of CO2 into hydrocarbon fuel , 2018, bioRxiv.

[110]  Min Zhang,et al.  Investigation on characteristics of 3D printing using Nostoc sphaeroides biomass. , 2018, Journal of the science of food and agriculture.

[111]  Yanchuan Guo,et al.  Development of a Photo-Crosslinking, Biodegradable GelMA/PEGDA Hydrogel for Guided Bone Regeneration Materials , 2018, Materials.

[112]  Shashi Kant Bhatia,et al.  Whole-cell Immobilization of Engineered Escherichia coli JY001 with Barium-alginate for Itaconic Acid Production , 2018, Biotechnology and Bioprocess Engineering.

[113]  Yong‐Su Jin,et al.  Value-added biotransformation of cellulosic sugars by engineered Saccharomyces cerevisiae. , 2018, Bioresource technology.

[114]  Neel S. Joshi,et al.  Engineered Living Materials: Prospects and Challenges for Using Biological Systems to Direct the Assembly of Smart Materials , 2018, Advanced materials.

[115]  A. Meyer,et al.  Printing of Patterned, Engineered E. coli Biofilms with a Low-Cost 3D Printer. , 2018, ACS synthetic biology.

[116]  Trevor G. Johnston,et al.  Additive Manufacturing of Catalytically Active Living Materials. , 2018, ACS applied materials & interfaces.

[117]  Stuart Kyle,et al.  3D Printing of Bacteria: The Next Frontier in Biofabrication. , 2018, Trends in biotechnology.

[118]  Swati Midha,et al.  Silk‐Based Bioinks for 3D Bioprinting , 2018, Advanced healthcare materials.

[119]  R. K Srivastava,et al.  A review on sustainable yeast biotechnological processes and applications. , 2018, Microbiological research.

[120]  Carsten P Radtke,et al.  The Biomaker: an entry‐level bioprinting device for biotechnological applications , 2018 .

[121]  D. Wangpraseurt,et al.  Tools for studying growth patterns and chemical dynamics of aggregated Pseudomonas aeruginosa exposed to different electron acceptors in an alginate bead model , 2018, npj Biofilms and Microbiomes.

[122]  Mingen Xu,et al.  Iterative feedback bio-printing-derived cell-laden hydrogel scaffolds with optimal geometrical fidelity and cellular controllability , 2018, Scientific Reports.

[123]  Bart Nicolai,et al.  3D printing of plant tissue for innovative food manufacturing: Encapsulation of alive plant cells into pectin based bio-ink , 2017 .

[124]  F. Domann,et al.  Limitations of oxygen delivery to cells in culture: An underappreciated problem in basic and translational research. , 2017, Free radical biology & medicine.

[125]  Manuel Schaffner,et al.  3D printing of bacteria into functional complex materials , 2017, Science Advances.

[126]  Thomas Bley,et al.  Green bioprinting: extrusion-based fabrication of plant cell-laden biopolymer hydrogel scaffolds , 2017, Biofabrication.

[127]  Qing Li,et al.  Biofabrication: A Guide to Technology and Terminology. , 2017, Trends in biotechnology.

[128]  Thomas Bley,et al.  Additive Biotech-Chances, challenges, and recent applications of additive manufacturing technologies in biotechnology. , 2017, New biotechnology.

[129]  Brendan M Leung,et al.  Dispersible oxygen microsensors map oxygen gradients in three-dimensional cell cultures. , 2017, Biomaterials science.

[130]  Anthony Tabet,et al.  Quantitative criteria to benchmark new and existing bio-inks for cell compatibility , 2017, Biofabrication.

[131]  Xiaohong Tian,et al.  Gelatin-Based Hydrogels for Organ 3D Bioprinting , 2017, Polymers.

[132]  M. Kühl,et al.  Light Sheet Microscopy Imaging of Light Absorption and Photosynthesis Distribution in Plant Tissue1 , 2017, Plant Physiology.

[133]  F. Piccinini,et al.  A new holistic 3D non-invasive analysis of cellular distribution and motility on fibroin-alginate microcarriers using light sheet fluorescent microscopy , 2017, PloS one.

[134]  N. Cameron,et al.  Bio-inks for 3D bioprinting: recent advances and future prospects , 2017 .

[135]  Michael Wagner,et al.  Optical coherence tomography in biofilm research: A comprehensive review , 2017, Biotechnology and bioengineering.

[136]  H. Fischer,et al.  3D bioprinting of cell-laden hydrogels for advanced tissue engineering , 2017 .

[137]  I. Loubinoux,et al.  Multiphoton Direct Laser Writing and 3D Imaging of Polymeric Freestanding Architectures for Cell Colonization. , 2017, Small.

[138]  A. Meyer,et al.  A Straightforward Approach for 3D Bacterial Printing , 2017, ACS synthetic biology.

[139]  P. Ralph,et al.  In vivo Microscale Measurements of Light and Photosynthesis during Coral Bleaching: Evidence for the Optical Feedback Loop? , 2017, Front. Microbiol..

[140]  Tal Danino,et al.  Spatial Control of Bacteria Using Screen Printing. , 2016, 3D printing and additive manufacturing.

[141]  M. Schieker,et al.  Oxygen mapping: Probing a novel seeding strategy for bone tissue engineering , 2016, Biotechnology and bioengineering.

[142]  C. J. Luo,et al.  From mammalian tissue engineering to 3D plant cell culture , 2016 .

[143]  P. Perré,et al.  Colony development of laser printed eukaryotic (yeast and microalga) microorganisms in co-culture , 2016 .

[144]  Sarah E. Baker,et al.  Printable enzyme-embedded materials for methane to methanol conversion , 2016, Nature Communications.

[145]  I. Lasa,et al.  Amyloid Structures as Biofilm Matrix Scaffolds , 2016, Journal of bacteriology.

[146]  I. Klimant,et al.  Design and Application of an Optical Sensor for Simultaneous Imaging of pH and Dissolved O2 with Low Cross-Talk , 2016 .

[147]  Ling Wang,et al.  Automated quantitative assessment of three-dimensional bioprinted hydrogel scaffolds using optical coherence tomography. , 2016, Biomedical optics express.

[148]  T. Woodfield,et al.  Biofabrication: reappraising the definition of an evolving field , 2016, Biofabrication.

[149]  Thomas Bley,et al.  Green bioprinting: Viability and growth analysis of microalgae immobilized in 3D‐plotted hydrogels versus suspension cultures , 2015 .

[150]  C. Griehl,et al.  Design of a continuous milking bioreactor for non-destructive hydrocarbon extraction from Botryococcus braunii , 2015, Journal of Applied Phycology.

[151]  E. Zussman,et al.  Living Composites of Electrospun Yeast Cells for Bioremediation and Ethanol Production. , 2015, Biomacromolecules.

[152]  R. Glud,et al.  Two decades of chemical imaging of solutes in sediments and soils--a review. , 2015, Analytica chimica acta.

[153]  Pierre O. Bagnaninchi,et al.  Motility imaging via optical coherence phase microscopy enables label‐free monitoring of tissue growth and viability in 3D tissue‐engineering scaffolds , 2015, Journal of tissue engineering and regenerative medicine.

[154]  Therese Andersen,et al.  3D Cell Culture in Alginate Hydrogels , 2015, Microarrays.

[155]  Thomas Bley,et al.  Green bioprinting: Fabrication of photosynthetic algae‐laden hydrogel scaffolds for biotechnological and medical applications , 2015 .

[156]  M. Kühl,et al.  Optical sensor nanoparticles in artificial sediments--a new tool to visualize O2 dynamics around the rhizome and roots of seagrasses. , 2015, Environmental science & technology.

[157]  Pavel Tomancak,et al.  Guide to light-sheet microscopy for adventurous biologists , 2014, Nature Methods.

[158]  Jason B Shear,et al.  Real-time monitoring of quorum sensing in 3D-printed bacterial aggregates using scanning electrochemical microscopy , 2014, Proceedings of the National Academy of Sciences.

[159]  Y. Sakai,et al.  The importance of physiological oxygen concentrations in the sandwich cultures of rat hepatocytes on gas‐permeable membranes , 2014, Biotechnology progress.

[160]  R. Altenburger,et al.  Alginate/silica hybrid materials for immobilization of green microalgae Chlorella vulgaris for cell-based sensor arrays. , 2014, Journal of materials chemistry. B.

[161]  Myra N. Chávez,et al.  Development of photosynthetic biomaterials for in vitro tissue engineering. , 2014, Acta biomaterialia.

[162]  Michael Sauer,et al.  Yeast biotechnology: teaching the old dog new tricks , 2014, Microbial Cell Factories.

[163]  Willy Verstraete,et al.  Self-healing concrete by use of microencapsulated bacterial spores , 2014 .

[164]  A. Ghaemmaghami,et al.  Self-reporting scaffolds for 3-dimensional cell culture. , 2013, Journal of visualized experiments : JoVE.

[165]  A. Wall-Medrano,et al.  Structural Stability and Viability of Microencapsulated Probiotic Bacteria: A Review. , 2013, Comprehensive reviews in food science and food safety.

[166]  J. Shear,et al.  3D printing of microscopic bacterial communities , 2013, Proceedings of the National Academy of Sciences.

[167]  A. Boccaccini,et al.  Taking a deep look: modern microscopy technologies to optimize the design and functionality of biocompatible scaffolds for tissue engineering in regenerative medicine , 2013, Journal of The Royal Society Interface.

[168]  Rebecca L Carrier,et al.  Spatially monitoring oxygen level in 3D microfabricated cell culture systems using optical oxygen sensing beads. , 2013, Lab on a chip.

[169]  R. Morais,et al.  Bioactivity and Applications of Sulphated Polysaccharides from Marine Microalgae , 2013 .

[170]  C. Rosell,et al.  Viability of some probiotic coatings in bread and its effect on the crust mechanical properties , 2012 .

[171]  G. Vinderola,et al.  Effect of heat treatment and spray drying on lactobacilli viability and resistance to simulated gastrointestinal digestion , 2012 .

[172]  Tao Xu,et al.  High throughput miniature drug-screening platform using bioprinting technology , 2012, Biofabrication.

[173]  S. A. Wilson,et al.  Recent advances towards development and commercialization of plant cell culture processes for the synthesis of biomolecules. , 2012, Plant biotechnology journal.

[174]  S. Sørensen,et al.  Biofilm Growth and Near-Infrared Radiation-Driven Photosynthesis of the Chlorophyll d-Containing Cyanobacterium Acaryochloris marina , 2012, Applied and Environmental Microbiology.

[175]  I. Klimant,et al.  Imaging of surface O2 dynamics in corals with magnetic micro optode particles , 2012 .

[176]  M. Loosdrecht,et al.  Quantitative measurement and visualization of biofilm O2 consumption rates in membrane filtration systems , 2012 .

[177]  Xiaolin Tian,et al.  Quorum Sensing and Bacterial Social Interactions in Biofilms , 2012, Sensors.

[178]  Esther Novosel,et al.  Vascularization is the key challenge in tissue engineering. , 2011, Advanced drug delivery reviews.

[179]  M. Kühl,et al.  Rapid assessment of different oxygenic phototrophs and single-cell photosynthesis with multicolour variable chlorophyll fluorescence imaging , 2011 .

[180]  R. Losick,et al.  Amyloid fibers provide structural integrity to Bacillus subtilis biofilms , 2010, Proceedings of the National Academy of Sciences.

[181]  S. Karuppusamy.  A review on trends in production of secondary metabolites from higher plants by in vitro tissue, organ and cell cultures. , 2009 .

[182]  Ying Liu,et al.  Engineering of bio-hybrid materials by electrospinning polymer-microbe fibers , 2009, Proceedings of the National Academy of Sciences.

[183]  Jost Weber,et al.  Bioprocessing of plant cell cultures for mass production of targeted compounds , 2009, Applied Microbiology and Biotechnology.

[184]  M. Kühl,et al.  Functional and structural imaging of phototrophic microbial communities and symbioses , 2008 .

[185]  I. Moreno-Garrido.  Microalgae immobilization: current techniques and uses. , 2008, Bioresource technology.

[186]  N. Baker.  Chlorophyll fluorescence: a probe of photosynthesis in vivo. , 2008, Annual review of plant biology.

[187]  S. Rodgers.  Novel applications of live bacteria in food services: probiotics and protective cultures , 2008 .

[188]  Joao B Xavier,et al.  The Evolution of Quorum Sensing in Bacterial Biofilms , 2008, PLoS biology.

[189]  M. Kühl,et al.  Combined Imaging of Bacteria and Oxygen in Biofilms , 2007, Applied and Environmental Microbiology.

[190]  M. Chapman,et al.  In Vitro Polymerization of a Functional Escherichia coli Amyloid Protein* , 2006, Journal of Biological Chemistry.

[191]  S. Beer,et al.  Immobilized microalgal cells as an oxygen supply system for encapsulated pancreatic islets: a feasibility study. , 2006, Artificial organs.

[192]  S. Beer,et al.  Photosynthetic oxygen generator for bioartificial pancreas. , 2006, Tissue engineering.

[193]  George M Whitesides,et al.  Bacterial printing press that regenerates its ink: contact-printing bacteria using hydrogel stamps. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[194]  P. Ralph,et al.  CORAL PHOTOBIOLOGY STUDIED WITH A NEW IMAGING PULSE AMPLITUDE MODULATED FLUOROMETER 1 , 2005 .

[195]  I. Virkajärvi,et al.  Stationary‐phase acid and heat treatments for improvement of the viability of probiotic lactobacilli and bifidobacteria , 2004, Journal of applied microbiology.

[196]  P. Kieran,et al.  Plant cell suspension cultures: some engineering considerations. , 1997, Journal of biotechnology.

[197]  T. Scheper,et al.  Real and pseudo oxygen gradients in Ca‐alginate beads monitored during polarographic Po2‐measurements using Pt‐needle microelectrodes , 1994, Biotechnology and bioengineering.

[198]  C. Nessler.  Metabolic engineering of plant secondary products , 1994, Transgenic Research.

[199]  J. Navarro,et al.  Glycerol production byDunaliella tertiolecta immobilized within Ca-alginate beads , 1986, Biotechnology Letters.

[200]  M. Thanou,et al.  Utility of Chitosan for 3D Printing and Bioprinting , 2019, Sustainable Agriculture Reviews 35.

[201]  M. Kühl,et al.  Optical O 2 sensing in aquatic systems and organisms , 2018 .

[202]  Timothy K Lu,et al.  3D Printing of Living Responsive Materials and Devices , 2018, Advanced materials.

[203]  A. Miyoshi,et al.  Functional Food Biotechnology: The Use of Native and Genetically Engineered Lactic Acid Bacteria , 2018 .

[204]  G. Holt,et al.  An evaluation study of pressure-compressed acoustic absorbers grown on agricultural by-products , 2017 .

[205]  Myra N. Chávez,et al.  Towards autotrophic tissue engineering: Photosynthetic gene therapy for regeneration. , 2016, Biomaterials.

[206]  Xavier Intes,et al.  3D Bioprinting and 3D Imaging for Stem Cell Engineering , 2015 .

[207]  Akhilesh K. Gaharwar,et al.  Polymers for Bioprinting , 2015 .

[208]  H. Beyenal,et al.  Microsensors and microscale gradients in biofilms. , 2014, Advances in biochemical engineering/biotechnology.

[209]  J. Lawrence,et al.  Investigation of microbial biofilm structure by laser scanning microscopy. , 2014, Advances in biochemical engineering/biotechnology.

[210]  B. Lennox,et al.  The electrospinning process, conditions and control , 2011 .

[211]  M. Kühl.  Optical microsensors for analysis of microbial communities. , 2005, Methods in enzymology.

[212]  Ulrich Schreiber,et al.  Pulse-Amplitude-Modulation (PAM) Fluorometry and Saturation Pulse Method: An Overview , 2004 .

[213]  I. Klimant,et al.  Measurement of chlorophyll fluorescence within leaves using a modified PAM Fluorometer with a fiber-optic microprobe , 2004, Photosynthesis Research.

[214]  Singh Yashverry.  Photosynthetic activity, and lipid and hydrocarbon production by alginate-immobilized cells of Botryococcus in relation to growth phase , 2003 .

[215]  M. Kühl,et al.  BIOGEOCHEMICAL MICROSENSORS FOR BOUNDARY LAYER STUDIES , 2000 .

[216]  P. Doran,et al.  Design of Mixing Systems for Plant Cell Suspensions in Stirred Reactors , 1999, Biotechnology progress.