论文信息 - Operational Characteristics of Flux-Lock Type SFCL With Series Connection of Two Coils

Operational Characteristics of Flux-Lock Type SFCL With Series Connection of Two Coils

In this paper, we investigated the operational characteristics of the flux-lock type superconducting fault current limiter (SFCL) with series connection of two coils, which was suggested by us previously. This SFCL has the similar fault current limiting characteristics to the flux-lock type SFCL with parallel connection of two coils. The current limiting operation of the SFCL is performed by the generation of the magnetic flux between two coils when a fault happens and the fault current limiting characteristics of the SFCL are dependent on the inductance ratio and the winding direction of two coils. To confirm it, the operational characteristics of this SFCL were analysed based on its electrical equivalent circuit and the fault current limiting characteristics of this SFCL were investigated through the fault current limiting experiments. Through the analysis, it was shown that the limited fault current and the resistance of high-TC superconducting (HTSC) element could be adjusted by two coils' inductance ratio and the winding direction of two coils.

Sung-Hun Lim

[1] W. Paul,et al. Superconducting control for surge currents , 1998 .

[2] K. Sasaki,et al. An experimental study on a fast self-acting magnetic shield type superconducting fault current limiter , 2002 .

[3] Switching properties of a hybrid type superconducting fault current limiter using YBCO stripes , 2002 .

[4] Sung-Hun Lim,et al. The improved hysteresis characteristics of flux-lock type SFCL using third winding , 2004 .

[5] Y. Laumond,et al. Towards the superconducting fault current limiter , 1991 .

[6] Sung-Hun Lim,et al. Fault current limiting characteristics due to winding direction between coil 1 and coil 2 in a flux-lock type SFCL , 2004 .

[7] Hong Soon Choi,et al. The fault current limiting characteristics of a flux-lock type high-T , 2004 .

[8] Hyo-Sang Choi,et al. Fault current limiting characteristics of a new resistive type superconducting fault current limiter using flux linkage , 2005 .

[9] H. Yamaguchi,et al. Characteristics analysis of transformer type superconducting fault current limiter , 2004, IEEE Transactions on Applied Superconductivity.