Projeto conceitual de componentes de um forno industrial por meio da integração entre a engenharia reversa e o DFMA

This study focuses on investigating the integration between reverse engineering (RE) and design for manufacture and assembly (DFMA) as tools to support the conceptual design of products. From a literature review of these concepts, this research aims to examine the adequacy of a model for the integrated use of DFMA and rapid prototyping in an ER approach in the design of a new locking system for an industrial oven and recommend improvements in conceptual design of a new lock system. The research method employed was action-research since the aim was to solve a problem identified in the company, object of study, in partnership with the company team. The results of the conceptual design indicate reductions, especially in cost, time to manufacture, and assembly time. It was concluded that the integration model studied was adequate to support the design process of the locking system proposed by the ER approach.

[1]  Eyup Bagci,et al.  Reverse engineering applications for recovery of broken or worn parts and re-manufacturing: Three case studies , 2009, Adv. Eng. Softw..

[2]  Steven C. Wheelwright,et al.  Revolutionizing Product Development: Quantum Leaps in Speed, Efficiency and Quality , 1992 .

[3]  Cost reduction of a diesel engine using the DFMA method , 2007 .

[4]  S. H. Choi,et al.  A virtual prototyping system for rapid product development , 2004, Comput. Aided Des..

[5]  L. G. Mury,et al.  Uma metodologia para adaptação e melhoria de produtos a partir da engenharia reversa , 2000 .

[6]  Jianzhong Zhu,et al.  The cause of secondary innovation dilemma in chinese enterprises and solutions , 2005, Proceedings. 2005 IEEE International Engineering Management Conference, 2005..

[7]  Liang-Chia Chen,et al.  Reverse engineering in the design of turbine blades – a case study in applying the MAMDP , 2000 .

[8]  Carlos Henrique Pereira Mello,et al.  Análise da aplicação do mapeamento do fluxo de valor na identificação de desperdícios do processo de desenvolvimento de produtos , 2009 .

[9]  Marc Bourreau,et al.  Cooperation in Product Development and Process R&D Between Competitors , 2007 .

[10]  Anna Kochan.  Rapid prototyping gains speed, volume and precision , 2000 .

[11]  Stefan Kohn,et al.  Computer aided innovation - State of the art from a new product development perspective , 2009, Comput. Ind..

[12]  Sérgio Luis da Silva,et al.  Práticas de gestão no desenvolvimento de produtos em empresas de autopeças , 2008 .

[13]  Nanua Singh,et al.  Lean product development: Maximizing the customer perceived value through design change (redesign) , 2008 .

[14]  George Q. Huang,et al.  Design for manufacture and assembly on the Internet , 1999 .

[15]  Bülent Kaya,et al.  Erratum to "Reverse engineering applications for recovery of broken or worn parts and re-manufacturing: Three case studies" , 2009, Adv. Eng. Softw..

[16]  Geoff Vincent,et al.  —Managing— New-Product Development , 1989, Springer US.

[17]  Chisu Wu,et al.  Reverse-engineering 1-n associations from Java bytecode using alias analysis , 2007, Inf. Softw. Technol..

[18]  John Bessant,et al.  Approaching the innovation frontier in Korea: the transition phase to leadership , 2004 .

[19]  D. Coghlan,et al.  Action research for operations management , 2002 .