A Comprehensive Review Toward the State-of-the-Art in Failure and Lifetime Predictions of Power Electronic Devices
暂无分享,去创建一个
Faisal Khan | Abu Hanif | Douglas DeVoto | Yuechuan Yu | Yuechuan Yu | A. Hanif | Faisal Khan | D. DeVoto
[1] Xiang Li,et al. Study of Degradation in Switching Mode Power Supply Based on the Theory of PoF , 2012, 2012 International Conference on Computer Science and Service System.
[2] A. Mertens,et al. Potential of digital gate units in high power appliations , 2008, 2008 13th International Power Electronics and Motion Control Conference.
[3] Dawei Xiang,et al. Condition Monitoring Power Module Solder Fatigue Using Inverter Harmonic Identification , 2012, IEEE Transactions on Power Electronics.
[4] T.G. Habetler,et al. Condition Monitoring of Power Electronic Circuits Using Artificial Neural Networks , 2009, IEEE Transactions on Power Electronics.
[5] Xiong Du,et al. Junction Temperature Prediction of IGBT Power Module Based on BP Neural Network , 2014 .
[6] Johan Driesen,et al. Fault-tolerant topology of a grid-connected PV inverter coupled by a Scott transformer , 2012, 2012 10th International Power & Energy Conference (IPEC).
[7] H. Solomon. Fatigue of 60/40 Solder , 1986 .
[8] B. Saha,et al. Towards prognostics for electronics components , 2009, 2009 IEEE Aerospace conference.
[9] L. Ran,et al. Monitoring Solder Fatigue in a Power Module Using Case-Above-Ambient Temperature Rise , 2011, IEEE Transactions on Industry Applications.
[10] A. Hamidi,et al. Reliability and lifetime evaluation of different wire bonding technologies for high power IGBT modules , 1999 .
[11] C. Buttay,et al. Reduced Order Electro-Thermal Models for Real-Time Health Management of Power Electronics , 2007, 2007 International Conference on Thermal, Mechanical and Multi-Physics Simulation Experiments in Microelectronics and Micro-Systems. EuroSime 2007.
[12] W. Dauksher,et al. A Second-Level SAC Solder-Joint Fatigue-Life Prediction Methodology , 2008, IEEE Transactions on Device and Materials Reliability.
[13] Fred Wang,et al. Junction temperature measurement of IGBTs using short circuit current , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).
[14] K. Goebel,et al. An agile accelerated aging, characterization and scenario simulation system for gate controlled power transistors , 2008, 2008 IEEE AUTOTESTCON.
[15] O. Salmela,et al. Acceleration Factors for Lead-Free Solder Materials , 2007, IEEE Transactions on Components and Packaging Technologies.
[16] Mohd. Amir Eleffendi,et al. Evaluation of on-state voltage VCE(ON) and threshold voltage Vth for real-time health monitoring of IGBT power modules , 2015, 2015 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe).
[17] Charles-Mathieu Genton,et al. Accelerated lifetime testing of energy storage capacitors used in particle accelerators power converters , 2015, 2015 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe).
[18] Mounira Berkani,et al. Ageing and Failure Modes of IGBT Modules in High-Temperature Power Cycling , 2011, IEEE Transactions on Industrial Electronics.
[19] Hua Lu,et al. Lifetime Prediction for Power Electronics Module Substrate Mount-down Solder Interconnect , 2007, 2007 International Symposium on High Density packaging and Microsystem Integration.
[20] Wei Lai,et al. Low $\Delta T_{j}$ Stress Cycle Effect in IGBT Power Module Die-Attach Lifetime Modeling , 2016, IEEE Transactions on Power Electronics.
[21] Robert W. Cox,et al. Online algorithm for early stage fault detection in IGBT switches , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[22] Y. Ikeda,et al. Full SiC power module with advanced structure and its solar inverter application , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).
[23] Keith C. Norris,et al. Reliability of controlled collapse interconnections , 1969 .
[24] Gerard Coquery,et al. Investigation of the heel crack mechanism in Al connections for power electronics modules , 2011, Microelectron. Reliab..
[25] Frede Blaabjerg,et al. Advanced Accelerated Power Cycling Test for Reliability Investigation of Power Device Modules , 2016, IEEE Transactions on Power Electronics.
[26] Mauro Ciappa,et al. Selected failure mechanisms of modern power modules , 2002, Microelectron. Reliab..
[27] Andrew J. Forsyth,et al. Real time, on line, age calculation of IGBT power modules , 2010 .
[28] Tarapong Sreenuch,et al. Computationally Efficient, Real-Time, and Embeddable Prognostic Techniques for Power Electronics , 2015, IEEE Transactions on Power Electronics.
[29] Janne Kiilunen,et al. System-level reliability testing a frequency converter with simultaneous stresses , 2011 .
[30] Jean-Michel Vinassa,et al. Strategy for designing accelerated aging tests to evaluate IGBT power modules lifetime in real operation mode , 2003 .
[31] Wei Xin,et al. Influences of DBC metal layout on the reliability of IGBT power modules , 2015, 2015 IEEE 3rd Workshop on Wide Bandgap Power Devices and Applications (WiPDA).
[32] Pengju Sun,et al. Monitoring Potential Defects in an IGBT Module Based on Dynamic Changes of the Gate Current , 2013, IEEE Transactions on Power Electronics.
[33] S.A. McKeown,et al. Energy-based methodology for the fatigue-life prediction of solder materials , 1991, 1991 Proceedings 41st Electronic Components & Technology Conference.
[34] G. Coquery,et al. Failure criteria for long term Accelerated Power Cycling Test linked to electrical turn off SOA on IGBT module. A 4000 hours test on 1200A–3300V module with AlSiC base plate , 2000 .
[35] Wolfgang Fichtner,et al. Measurement of the transient junction temperature in MOSFET devices under operating conditions , 2007, Microelectron. Reliab..
[36] T. V. Thang,et al. Gate Oxide Reliability Issues of SiC MOSFETs Under Short-Circuit Operation , 2015, IEEE Transactions on Power Electronics.
[37] Philippe Dupuy,et al. Power module lifetime estimation from chip temperature direct measurement in an automotive traction inverter , 2001, Microelectron. Reliab..
[38] B. S. Umesh,et al. A fault tolerant dual inverter configuration for islanded mode photovoltaic generation system , 2013, 2013 1st International Future Energy Electronics Conference (IFEEC).
[39] E. E. Kostandyan,et al. Reliability of Wind Turbine components — Solder elements fatigue failure , 2012, 2012 Proceedings Annual Reliability and Maintainability Symposium.
[40] C. M. Johnson,et al. Physics-of-Failure Lifetime Prediction Models for Wire Bond Interconnects in Power Electronic Modules , 2013, IEEE Transactions on Device and Materials Reliability.
[41] Numerical and experimental results correlation during power MOSFET ageing , 2012, 2012 13th International Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems.
[42] Masatoshi Uno,et al. Cycle Life Evaluation Based on Accelerated Aging Testing for Lithium-Ion Capacitors as Alternative to Rechargeable Batteries , 2016, IEEE Transactions on Industrial Electronics.
[43] M. Sultana Nasrin,et al. Quantifying Device Degradation in Live Power Converters Using SSTDR Assisted Impedance Matrix , 2014, IEEE Transactions on Power Electronics.
[44] Johann W. Kolar,et al. Current and Temperature Measurement Concepts Enabling Intelligent Gate Drives , 2011 .
[45] Josef Lutz,et al. Model for Power Cycling lifetime of IGBT Modules - various factors influencing lifetime , 2008 .
[46] Hui Huang,et al. A Lifetime Estimation Technique for Voltage Source Inverters , 2013, IEEE Transactions on Power Electronics.
[47] Wolfgang Fichtner,et al. Lifetime extrapolation for IGBT modules under realistic operation conditions , 1999 .
[48] A. Mertens,et al. Considerations for a Digital Gate Unit in high power applications , 2008, 2008 IEEE Power Electronics Specialists Conference.
[49] Michael Osterman,et al. A Life Model for Supercapacitors , 2015, IEEE Transactions on Device and Materials Reliability.
[50] A. Tajfar,et al. A fault-tolerant switching scheme for a photovoltaic high-frequency-link inverter , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).
[51] Chris Bailey,et al. Application of coupled electro-thermal and physics-of-failure-based analysis to the design of accelerated life tests for power modules , 2014, Microelectron. Reliab..
[52] Pascal Bevilacqua,et al. Accelerated Ageing of Metallized Film Capacitors Under High Ripple Currents Combined With a DC Voltage , 2015, IEEE Transactions on Power Electronics.
[53] U. Drofenik,et al. A systematic design approach to thermal-electrical power electronics integration , 2008, 2008 2nd Electronics System-Integration Technology Conference.
[54] V. Sarihan,et al. Energy based methodology for damage and life prediction of solder joints under thermal cycling , 1993, Proceedings of IEEE 43rd Electronic Components and Technology Conference (ECTC '93).
[55] E. Herr,et al. Reliability of non-hermetic pressure contact IGBT modules , 2001, Microelectron. Reliab..
[56] L. Coffin,et al. A Study of the Effects of Cyclic Thermal Stresses on a Ductile Metal , 1954, Journal of Fluids Engineering.
[57] Mahera Musallam,et al. An Efficient Implementation of the Rainflow Counting Algorithm for Life Consumption Estimation , 2012, IEEE Transactions on Reliability.
[58] T. Krebs,et al. A breakthrough in power electronics reliability — New die attach and wire bonding materials , 2013, 2013 IEEE 63rd Electronic Components and Technology Conference.
[59] L. Dupont,et al. Evaluation of IGBT thermo-sensitive electrical parameters under different dissipation conditions - Comparison with infrared measurements , 2012, Microelectron. Reliab..
[60] Y. Kamita,et al. Thermal and Structural Simulation Techniques for Estimating Fatigue Life of an IGBT Module , 2008, 2008 20th International Symposium on Power Semiconductor Devices and IC's.
[61] Frédéric Richardeau,et al. Evaluation of $V_{\rm ce}$ Monitoring as a Real-Time Method to Estimate Aging of Bond Wire-IGBT Modules Stressed by Power Cycling , 2013, IEEE Transactions on Industrial Electronics.
[62] Sankalita Saha,et al. Accelerated aging with electrical overstress and prognostics for power MOSFETs , 2011, IEEE 2011 EnergyTech.
[63] Janne Kiilunen,et al. Product Level Accelerated Reliability Testing of Motor Drives With Input Power Interruptions , 2015, IEEE Transactions on Power Electronics.
[64] W. Denson,et al. The history of reliability prediction , 1998 .
[65] G. Nicoletti,et al. Fast power cycling test of IGBT modules in traction application , 1997, Proceedings of Second International Conference on Power Electronics and Drive Systems.
[66] Michael J. Roemer,et al. Online Ringing Characterization as a Diagnostic Technique for IGBTs in Power Drives , 2009, IEEE Transactions on Instrumentation and Measurement.
[67] Ajeet Rohatgi,et al. Development of a Methodology for Improving Photovoltaic Inverter Reliability , 2008, IEEE Transactions on Industrial Electronics.
[68] Stig Munk-Nielsen,et al. Test setup for accelerated test of high power IGBT modules with online monitoring of Vce and Vf voltage during converter operation , 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).
[69] F. Theunis,et al. Prediction of high cycle fatigue in aluminum bond wires: A physics of failure approach combining experiments and multi-physics simulations , 2006, EuroSime 2006 - 7th International Conference on Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems.
[70] Michel Mermet-Guyennet,et al. Temperature measurement on series resistance and devices in power packs based on on-state voltage drop monitoring at high current , 2006, Microelectron. Reliab..
[71] H. Calleja,et al. Effect of the Mission Profile on the Reliability of a Power Converter Aimed at Photovoltaic Applications—A Case Study , 2013, IEEE Transactions on Power Electronics.
[72] Jaleleddine Ben Hadj Slama,et al. Experimental study on the EMI and switching time evolution of IGBT devices after operating aging tests , 2014, 2014 International Conference on Electrical Sciences and Technologies in Maghreb (CISTEM).
[73] S. Haumann,et al. Novel bonding and joining technology for power electronics - Enabler for improved lifetime, reliability, cost and power density , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).
[74] J.D. van Wyk,et al. Void induced thermal impedance in power semiconductor modules: some transient temperature effects , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).
[75] Pedro Rodriguez,et al. Electro-thermal modeling for junction temperature cycling-based lifetime prediction of a press-pack IGBT 3L-NPC-VSC applied to large wind turbines , 2011, 2011 IEEE Energy Conversion Congress and Exposition.
[76] Guna S Selvaduray,et al. Solder joint fatigue models: review and applicability to chip scale packages , 2000 .
[77] M. Liserre,et al. Junction temperature measurements via thermo-sensitive electrical parameters and their application to condition monitoring and active thermal control of power converters , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.
[78] P. Jacob,et al. SEM investigation on IGBT latch-up failure , 2001, 2001 6th International Conference on Solid-State and Integrated Circuit Technology. Proceedings (Cat. No.01EX443).
[79] G.K. Venayagamoorthy,et al. Self-Healing Control with Multifunctional Gate Drive Circuits for Power Converters , 2007, 2007 IEEE Industry Applications Annual Meeting.
[80] R. Schmidt,et al. Novel wire bond material for advanced power module packages , 2012, Microelectron. Reliab..
[81] Ly. Benbahouche,et al. A comprehensive analysis of failure mechanisms: Latch up and second breakdown in IGBT(IXYS) and improvement , 2012, 2012 19th International Conference on Microwaves, Radar & Wireless Communications.
[82] A. Ginart,et al. Turn-Off Time as an Early Indicator of Insulated Gate Bipolar Transistor Latch-up , 2012, IEEE Transactions on Power Electronics.
[83] M. Pecht,et al. Precursor Parameter Identification for Insulated Gate Bipolar Transistor (IGBT) Prognostics , 2009, IEEE Transactions on Reliability.
[84] Eckhard Prof. Wolfgang,et al. Advanced IGBT modules for railway traction applications : Reliability testing , 1998 .
[85] W. P. Cao,et al. Onboard condition monitoring of solder fatigue in IGBT power modules , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[86] D. Embrey. Reliability Engineering and System Safely 38 (1992) 199-208 , 2003 .
[87] G. Coquery,et al. Test bench for active ageing of power modules reproducing constraints close to automotive driving conditions , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).
[88] L. Dupont,et al. Ageing Test Results of low voltage MOSFET Modules for electrical vehicles , 2007, 2007 European Conference on Power Electronics and Applications.
[89] Vijay K. Garg,et al. Prognostic and Warning System for Power-Electronic Modules in Electric, Hybrid Electric, and Fuel-Cell Vehicles , 2008, IEEE Transactions on Industrial Electronics.
[90] Xuhua Huang,et al. Fatigue life and reliability prediction of electronic packages under thermal cycling conditions through FEM analysis and acceleration models , 2012, 2012 14th International Conference on Electronic Materials and Packaging (EMAP).
[91] C. M. Johnson,et al. Automated Fast Extraction of Compact Thermal Models for Power Electronic Modules , 2013, IEEE Transactions on Power Electronics.
[92] S. Dusmez,et al. An accelerated thermal aging platform to monitor fault precursor on-state resistance , 2015, 2015 IEEE International Electric Machines & Drives Conference (IEMDC).
[93] J. Stathis,et al. Dielectric breakdown mechanisms in gate oxides , 2005 .
[94] Sankalita Saha,et al. Prognostics of power MOSFET , 2011, 2011 IEEE 23rd International Symposium on Power Semiconductor Devices and ICs.
[95] S. Manson. Behavior of materials under conditions of thermal stress , 1953 .
[96] Frede Blaabjerg,et al. Transitioning to Physics-of-Failure as a Reliability Driver in Power Electronics , 2014, IEEE Journal of Emerging and Selected Topics in Power Electronics.
[97] E. R. Motto,et al. IGBT module with user accessible on-chip current and temperature sensors , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).
[98] Frede Blaabjerg,et al. Advanced power cycling test for power module with on-line on-state VCE measurement , 2015, 2015 IEEE Applied Power Electronics Conference and Exposition (APEC).
[99] Zhaohui Luo,et al. A thermal model for insulated gate bipolar transistor module , 2004, IEEE Transactions on Power Electronics.
[100] S. Bernet,et al. Estimation and measurement of junction temperatures in a three-level voltage source converter , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..
[101] Freddy Chan,et al. Reliability Estimation of Three Single-Phase Topologies in Grid-Connected PV Systems , 2011, IEEE Transactions on Industrial Electronics.
[102] Michael G. Pecht,et al. A prognostic approach for non-punch through and field stop IGBTs , 2012, Microelectron. Reliab..
[103] Stéphane Lefebvre,et al. A study of the effect of degradation of the aluminium metallization layer in the case of power semiconductor devices , 2011, Microelectron. Reliab..
[104] Wolfgang Fichtner,et al. Lifetime prediction and design of reliability tests for high-power devices in automotive applications , 2003 .
[105] T. Martire,et al. On-line [TJ, Vce] monitoring of IGBTs stressed by fast power cycling tests , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).
[106] Bilal Akin,et al. Remaining Useful Lifetime Estimation for Thermally Stressed Power MOSFETs Based on on-State Resistance Variation , 2016, IEEE Transactions on Industry Applications.
[107] Ilkka Vaalasranta,et al. Power MOSFET failure and degradation mechanisms in flyback topology under high temperature and high humidity conditions , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[108] Enrico Zio,et al. Analysis of the Results of Accelerated Aging Tests in Insulated Gate Bipolar Transistors , 2016, IEEE Transactions on Power Electronics.
[109] Remus Teodorescu,et al. Accelerated lifetime testing methodology for lifetime estimation of Lithium-ion batteries used in augmented wind power plants , 2013, 2013 IEEE Energy Conversion Congress and Exposition.
[110] Giovanni Busatto,et al. Long term reliability testing of HV-IGBT modules in worst case traction operation , 1999 .
[111] Z. Khatir,et al. Temperature-Level Effect on Solder Lifetime During Thermal Cycling of Power Modules , 2008, IEEE Transactions on Device and Materials Reliability.
[112] Peter Tavner,et al. Condition Monitoring for Device Reliability in Power Electronic Converters: A Review , 2010, IEEE Transactions on Power Electronics.
[113] C. Bailey,et al. Predicting the Reliability of Power Electronic Modules , 2007, 2007 8th International Conference on Electronic Packaging Technology.
[114] Faisal Khan,et al. Reliability Analysis and Performance Degradation of a Boost Converter , 2014 .
[115] Chen Wang,et al. IGBT condition monitoring with system identification methods , 2014, 2014 IEEE Conference and Expo Transportation Electrification Asia-Pacific (ITEC Asia-Pacific).
[116] C. Bailey,et al. A Physics-of-failure based Prognostic Method for Power Modules , 2008, 2008 10th Electronics Packaging Technology Conference.
[117] Stéphane Lefebvre,et al. Degradation behavior of 600 V-200 A IGBT modules under power cycling and high temperature environment conditions , 2007, Microelectron. Reliab..
[118] P. Singh,et al. Power MOSFET failure mechanisms , 2004, INTELEC 2004. 26th Annual International Telecommunications Energy Conference.
[119] Anant S. Kamath,et al. Aging Precursor Identification and Lifetime Estimation for Thermally Aged Discrete Package Silicon Power Switches , 2017, IEEE Transactions on Industry Applications.
[120] John Dalsgaard Sørensen,et al. Physics of failure as a basis for solder elements reliability assessment in wind turbines , 2012, Reliab. Eng. Syst. Saf..
[121] Wolfgang Fichtner,et al. New technique for the measurement of the static and of the transient junction temperature in IGBT devices under operating conditions , 2006, Microelectron. Reliab..
[122] Huifeng Chen,et al. Real-Time Temperature Estimation for Power MOSFETs Considering Thermal Aging Effects , 2014, IEEE Transactions on Device and Materials Reliability.
[123] João Paulo Bazzo,et al. Thermal characteristics analysis of an IGBT using a fiber Bragg grating , 2012 .
[124] Yantao Song,et al. Survey on Reliability of Power Electronic Systems , 2013, IEEE Transactions on Power Electronics.
[125] Wolfgang Fichtner,et al. Thermal component model for electrothermal analysis of IGBT module systems , 2001 .
[126] Sibylle Dieckerhoff,et al. Power cycling test bench for IGBT power modules used in wind applications , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.
[127] Yi Ding,et al. Reliability evaluation of three-level inverters , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).
[128] Sankalita Saha,et al. Accelerated aging system for prognostics of power semiconductor devices , 2010, 2010 IEEE AUTOTESTCON.
[129] A. Claassen,et al. Comparison of diodes and resistors for measuring chip temperature during thermal characterization of electronic packages using thermal test chips , 1997, Thirteenth Annual IEEE. Semiconductor Thermal Measurement and Management Symposium.
[130] Wei Qiao,et al. Study on case temperature distribution for condition monitoring of multidie IGBT modules , 2014, 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014.