Achieving copper sulfide leaf like nanostructure electrode for high performance supercapacitor and quantum-dot sensitized solar cells

Abstract Copper sulfide is an important multifunctional semiconductor that has attracted considerable attention owing to its outstanding properties and multiple applications, such as energy storage and electrochemical energy conversion. This paper describes a cost-effective and simple low-temperature solution approach to the preparation of copper sulfide for supercapacitors (SCs) and quantum-dot sensitized solar cells (QDSSCs). X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy confirmed that the nickel foam with a coriander leaf like nanostructure had been coated successfully with copper sulfide. As an electrode material for SCs, the CC-3 h showed excellent specific capacitance (5029.28 at 4 A g−1), energy density (169.73 W h kg−1), and superior cycling durability with 107% retention after 2000 cycles. Interestingly, the QDSSCs equipped with CC-2 h and CC-3 h counter electrodes (CEs) exhibited a maximum power conversion efficiency of 2.52% and 3.48%, respectively. The improved performance of the CC-3 h electrode was attributed mainly to the large surface area (which could contribute sufficient electroactive species), good conductivity, and high electrocatalytic activity. Overall, this work delivers novel insights into the use of copper sulfide and offers an important guidelines for the fabrication of next level energy storage and conversion devices.

[1]  F. Béguin,et al.  Supercapacitors based on conducting polymers/nanotubes composites , 2006 .

[2]  Hai-Bo Lu,et al.  Facile synthesis of dandelion-like Bi2S3 microspheres and their electrochemical properties for lithium-ion batteries , 2013 .

[3]  M. Jayalakshmi,et al.  Synthesis of zinc sulphide nanoparticles by thiourea hydrolysis and their characterization for electrochemical capacitor applications , 2006 .

[4]  Boyang Liu,et al.  New energy storage option: toward ZnCo2O4 nanorods/nickel foam architectures for high-performance supercapacitors. , 2013, ACS applied materials & interfaces.

[5]  J. Tarascon,et al.  Growth of single-crystal copper sulfide thin films viaelectrodeposition in ionic liquid media for lithium ion batteries , 2012 .

[6]  Hui Peng,et al.  Controllable synthesis of CuS with hierarchical structures via a surfactant-free method for high-performance supercapacitors , 2014 .

[7]  Enhancing the photovoltaic performance and stability of QDSSCs using surface reinforced Pt nanostructures with controllable morphology and superior electrocatalysis via cost-effective chemical bath deposition. , 2016, Dalton transactions.

[8]  Liang Zhou,et al.  Arrays of ultrafine CuS nanoneedles supported on a CNT backbone for application in supercapacitors , 2012 .

[9]  Ke-Jing Huang,et al.  One-step solvothermal synthesis of different morphologies CuS nanosheets compared as supercapacitor electrode materials , 2015 .

[10]  K. Shankar,et al.  Anodic Cu₂S and CuS nanorod and nanowall arrays: preparation, properties and application in CO₂ photoreduction. , 2014, Nanoscale.

[11]  Jiaqin Yang,et al.  Solvothermal Synthesis of Three-Dimensional Hierarchical CuS Microspheres from a Cu-Based Ionic Liquid Precursor for High-Performance Asymmetric Supercapacitors. , 2015, ACS applied materials & interfaces.

[12]  Hui Xia,et al.  Nanostructured manganese oxide thin films as electrode material for supercapacitors , 2011 .

[13]  Byung Chul Kim,et al.  Electrochemical capacitor behavior of copper sulfide (CuS) nanoplatelets , 2014 .

[14]  Hua Zhang,et al.  The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets. , 2013, Nature chemistry.

[15]  S. S. Rao,et al.  Carbon nanotube/metal-sulfide composite flexible electrodes for high-performance quantum dot-sensitized solar cells and supercapacitors , 2017, Scientific Reports.

[16]  Yu-Kuei Hsu,et al.  Synthesis of copper sulfide nanowire arrays for high-performance supercapacitors , 2014 .

[17]  Chang Su Kim,et al.  Synthesis, Characterization, and Photovoltaic Properties of 4,8-Dithienylbenzo[1,2-b:4,5-b′]dithiophene-Based Donor–Acceptor Polymers with New Polymerization and 2D Conjugation Extension Pathways: A Potential Donor Building Block for High Performance and Stable Inverted Organic Solar Cells , 2015 .

[18]  Chandu V. V. M. Gopi,et al.  Cobalt sulfide thin film as an efficient counter electrode for dye-sensitized solar cells , 2014 .

[19]  Hee-jee Kim,et al.  The effect of TiO2 nanoflowers as a compact layer for CdS quantum-dot sensitized solar cells with improved performance. , 2015, Dalton transactions.

[20]  H. Alshareef,et al.  Electrochemical Energy Storage Devices Using Electrodes Incorporating Carbon Nanocoils and Metal Oxides Nanoparticles , 2011 .

[21]  Hui Xia,et al.  Hierarchically Structured Co3O4@Pt@MnO2 Nanowire Arrays for High-Performance Supercapacitors , 2013, Scientific Reports.

[22]  Hee-jee Kim,et al.  Enhance the performance of quantum dot-sensitized solar cell by manganese-doped ZnS films as a passivation layer , 2015 .

[23]  C. Drummond,et al.  Solvent nanostructure, the solvophobic effect and amphiphile self-assembly in ionic liquids. , 2013, Chemical Society reviews.

[24]  Jianji Wang,et al.  Ionic liquids-modulated two-phase thermal synthesis of three-dimensional CuS nanostructures , 2012 .

[25]  Hee-jee Kim,et al.  Time Varied Morphology Controllable Fabrication of NiS Nanosheets Structured Thin Film and its Application as a Counter Electrode for QDSSC , 2015 .

[26]  Chandra Sekhar Rout,et al.  Electrodeposited Nickel Cobalt Manganese based mixed sulfide nanosheets for high performance supercapacitor application , 2017 .

[27]  Wenjun Zheng,et al.  α-Fe2O3 nanochains: ammonium acetate-based ionothermal synthesis and ultrasensitive sensors for low-ppm-level H2S gas. , 2013, Nanoscale.

[28]  Huan Pang,et al.  Cu superstructures fabricated using tree leaves and Cu–MnO2 superstructures for high performance supercapacitors , 2013 .

[29]  Xiaogang Zhang,et al.  Electrochemically induced transformation of NiS nanoparticles into Ni(OH)2 in KOH aqueous solution toward electrochemical capacitors , 2011 .

[30]  Huaihe Song,et al.  Two dimensional graphene–SnS2 hybrids with superior rate capability for lithium ion storage , 2012 .

[31]  Yong-Qing Zhao,et al.  Electrochemical characterization on cobalt sulfide for electrochemical supercapacitors , 2007 .

[32]  M. V. Sangaranarayanan,et al.  Polyaniline-based nickel electrodes for electrochemical supercapacitors—Influence of Triton X-100 , 2006 .

[33]  Y. Shim,et al.  Template Free Preparation of Heteroatoms Doped Carbon Spheres with Trace Fe for Efficient Oxygen Reduction Reaction and Supercapacitor , 2017 .

[34]  Hui Peng,et al.  High-performance supercapacitor based on multi-structural CuS@polypyrrole composites prepared by in situ oxidative polymerization , 2014 .

[35]  Hee-jee Kim,et al.  Investigation on novel CuS/NiS composite counter electrode for hindering charge recombination in quantum dot sensitized solar cells , 2016 .