Stress sensitivity analysis and optimization of automobile body frame consisting of rectangular tubes

At conceptual design stage, beam element is extensively used to create the frame structure of automobile body, which can not only archive the accurate stiffness but also reduce much computational cost. However, the stress definition of beam element is very complex so that the stress sensitivity and optimization are difficult to analytically derive and numerically program. This paper presents an solution to this problem and an application in the lightweight optimization design of automobile frame. Firstly, maximal Von Mises stress of rectangular tube is calculated by using the superposition of stress, which is together induced by the axial force, bending moments, torsional moment and shear force. Secondly, the sensitivity of Von Mises Stress with respect to size design variables: breadth, height and thickness are derived, respectively. Thirdly, an optimal criterion is constructed by Lagrangian multiplier method to solve the frame optimization with stress constraints. Lastly, numerical example of car frame proves that the proposed method can guarantee the stress of each beam element almost fully reaches at the yielding stress.

[1]  Anders Klarbring,et al.  Structural optimization of modular product families with application to car space frame structures , 2006 .

[2]  Masataka Yoshimura,et al.  Structural optimization based on topology optimization techniques using frame elements considering cross-sectional properties , 2007 .

[3]  Kazuhiro Saitou,et al.  Decomposition-based assembly synthesis for maximum structural strength and modularity , 2004 .

[4]  J. Sobieszczanski-Sobieski,et al.  Optimization of car body under constraints of noise, vibration, and harshness (NVH), and crash , 2001 .

[5]  L. H. Zhao,et al.  Fatigue assessment of rear axle under service loading histories considering the strengthening and damaging effects of loads below fatigue limit , 2014 .

[6]  Kazuhiro Saitou,et al.  Optimal Subassembly Partitioning of Space Frame Structures for In-Process Dimensional Adjustability and Stiffness , 2006 .

[7]  Stijn Donders,et al.  Concept design of vehicle bodies using reduced models of beams, joints and panels , 2011 .

[8]  B. L. Boada,et al.  Torsional stiffness and weight optimization of a real bus structure , 2010 .

[9]  Anders Klarbring,et al.  Conceptual optimal design of modular car product families using simultaneous size, shape and topology optimization , 2007 .

[10]  Hu Wang,et al.  Probability-based least square support vector regression metamodeling technique for crashworthiness optimization problems , 2011 .

[11]  H. J. Yim,et al.  Analysis of vehicle structural performance during small-overlap frontal impact , 2015 .

[12]  Kazuhiro Saitou,et al.  Decomposition-Based Assembly Synthesis for Structural Stiffness , 2003 .

[13]  Jungmin Lee,et al.  Light-weight design of automotive suspension link based on design of experiment , 2015 .

[14]  Stijn Donders,et al.  A reduced beam and joint concept modeling approach to optimize global vehicle body dynamics , 2009 .

[15]  P. Duysinx,et al.  Topology optimization for minimum weight with compliance and stress constraints , 2012 .

[16]  Wenjie Zuo,et al.  New Adaptive Technique of Kirsch Method for Structural Reanalysis , 2014 .

[17]  Hu Wang,et al.  Time-based metamodeling technique for vehicle crashworthiness optimization , 2010 .

[18]  Kazuhiro Saitou,et al.  Decomposition-Based Assembly Synthesis of Space Frame Structures Using Joint Library , 2006 .

[19]  Wenjie Zuo,et al.  Component sensitivity analysis of conceptual vehicle body for lightweight design under static and dynamic stiffness demands , 2014 .

[20]  Masataka Yoshimura,et al.  Concurrent Design and Evaluation Based on Structural Optimization using Structural and Function-oriented Elements at the Conceptual Design Phase , 2005, Concurr. Eng. Res. Appl..

[21]  Enying Li,et al.  A multiple-GPU based parallel independent coefficient reanalysis method and applications for vehicle design , 2015, Adv. Eng. Softw..

[22]  Wenjie Zuo,et al.  An object-oriented graphics interface design and optimization software for cross-sectional shape of automobile body , 2013, Adv. Eng. Softw..

[23]  Tao Xu,et al.  A complete development process of finite element software for body-in-white structure with semi-rigid beams in .NET framework , 2012, Adv. Eng. Softw..

[24]  Wenjie Zuo,et al.  Bi-level optimization for the cross-sectional shape of a thin-walled car body frame with static stiffness and dynamic frequency stiffness constraints , 2015 .