Probabilistic method to select calculation accelerograms based on uniform seismic hazard acceleration response spectra

Abstract A dynamic analysis of a structure requires the previous definition of the accelerograms and the structure characteristics. The response of a structure subject to a seismic movement can be determined by two methods: either using the accelerograms recorded near the site, or using visco-elastic response spectra. The first method should only be used for locations where many accelerograms have been recorded, and needs a probabilistic calculation to ascertain the design accelerograms. The use of visco-elastic response spectra is based upon the fact that the response spectrum is the soil movement parameter better related to the structural response and is more adequate to obtain accelerograms in regions where the number of records is insufficient. This is the most commonly used method as the response of structures, in the elastic linear range, can be obtained as the superposition of a few modes of vibration. A probabilistic method for selecting calculation accelerograms is presented in this paper. First, the probabilistic hazard equation is solved. Based on the hazard curves obtained, the uniform seismic hazard acceleration response spectrum (USHARS) is constructed for the location, according to the type of soil and the required hazard level (exposure time and exceedance probability). Then, calculation accelerograms are selected. Based on this methodology, real accelerograms, for a return period of 975 years, have been obtained for San Pedro Cliff (Spain) at the Alhambra in Granada.

[1]  Kaye M. Shedlock,et al.  74 - The GSHAP Global Seismic Hazard Map , 2003 .

[2]  F. Vidal,et al.  Geodynamic evolution of the lithosphere and upper mantle beneath the Alboran region of the western Mediterranean: Constraints from travel time tomography , 2000 .

[3]  James P. Lewis,et al.  Natural Disasters and Vulnerability Analysis , 1981 .

[4]  E. J. Gumbel,et al.  Statistics of Extremes. , 1960 .

[5]  R. Basili,et al.  The Database of Individual Seismogenic Sources (DISS), version 3: Summarizing 20 years of research on Italy's earthquake geology , 2008 .

[6]  Elisa Buforn,et al.  Seismicity, source mechanisms and tectonics of the Azores-Gibraltar plate boundary , 1988 .

[7]  David M. Boore,et al.  Peak horizontal acceleration and velocity from strong motion records including records from the 1979 Imperial Valley, California, earthquake , 1981 .

[8]  S. Cloetingh,et al.  Local stress fields and intraplate deformation of Iberia: variations in spatial and temporal interplay of regional stress sources , 1999 .

[9]  A critical reappraisal of some problems in engineering seismology , 2001 .

[10]  R. Romeo,et al.  Probabilistic versus deterministic seismic hazard analysis: an integrated approach for siting problems , 2000 .

[11]  John Douglas,et al.  An investigation of analysis of variance as a tool for exploring regional differences in strong ground motions , 2004 .

[12]  H. Kanamori The energy release in great earthquakes , 1977 .

[13]  Elisa Buforn,et al.  Seismotectonics of the Ibero-Maghrebian region , 1995 .

[14]  George W. Housner,et al.  Spectrum Intensities of Strong-Motion Earthquakes , 1952 .

[15]  John Douglas,et al.  USE OF ANALYSIS OF VARIANCE FOR THE INVESTIGATION OF REGIONAL DEPENDENCE OF STRONG GROUND MOTIONS , 2002 .

[16]  D. L. Bernreuter,et al.  Seismic hazard characterization of 69 nuclear plant sites east of the Rocky Mountains: Results and discussion for the Batch 4 sites , 2017 .

[17]  Bruce A. Bolt Earthquakes and Geological Discovery , 1993 .

[18]  Antonio Pugliese,et al.  Seismicity, seismotectonics and seismic hazard of Italy , 2000 .

[19]  Alicia Troncoso Lora,et al.  Pattern recognition to forecast seismic time series , 2010, Expert Syst. Appl..

[20]  K McGuire Robin,et al.  Deterministic vs. probabilistic earthquake hazards and risks , 1999 .

[21]  Richard G. Gordon,et al.  Closure of the Africa‐Eurasia‐North America Plate motion circuit and tectonics of the Gloria Fault , 1989 .

[22]  Adrian M. Chandler,et al.  Deterministic seismic hazard parameters and engineering risk implications for the Hong Kong region , 2001 .

[23]  J. G. Anderson,et al.  Selection of earthquake resistant design criteria for nuclear power plants: Methodology and technical cases: Methods for introduction of geological data into characterization of active faults and seismicity and upgrading of the uniform risk spectrum technique , 1987 .

[24]  Eulàlia Masana,et al.  Active faulting offshore SE Spain (Alboran Sea): Implications for earthquake hazard assessment in the Southern Iberian Margin , 2006 .

[25]  Kaye M. Shedlock,et al.  The GSHAP Global Seismic Hazard Map , 2000 .

[26]  Kaye M. Shedlock,et al.  The GSHAP Global Seismic Hazard Map , 1999 .

[27]  Anastasia Kiratzi,et al.  Active crustal deformation from the Azores triple junction to the Middle East , 1995 .

[28]  Alan L. Kafka,et al.  A Monte Carlo approach to seismic hazard analysis , 1999 .

[29]  W. B. Joyner,et al.  ESTIMATION OF RESPONSE SPECTRA AND PEAK ACCELERATIONS FROM WESTERN NORTH AMERICAN EARTHQUAKES: AN INTERIM REPORT PART 2 , 1993 .

[30]  J. Bommer,et al.  Style-of-Faulting in Ground-Motion Prediction Equations , 2003 .

[31]  Graham H. Powell,et al.  Seismic damage prediction by deterministic methods: Concepts and procedures , 1988 .

[32]  Marco Pagani,et al.  Regional and local seismic hazard assessment , 2001 .

[33]  J. Douglas,et al.  Equations for the Estimation of Strong Ground Motions from Shallow Crustal Earthquakes Using Data from Europe and the Middle East: Horizontal Peak Ground Acceleration and Spectral Acceleration , 2005 .

[34]  Kamil Kayabali,et al.  Seismic hazard map of Turkey using the deterministic approach , 2003 .

[35]  Paolo Gasperini,et al.  The new release of the database of Earthquake Mechanisms of the Mediterranean Area (EMMA Version 2) , 2004 .

[36]  C. Cornell Engineering seismic risk analysis , 1968 .

[37]  Peter Bird,et al.  The transition from linear to diffuse plate boundary in the Azores–Gibraltar region: results from a thin-sheet model , 2001 .