Experimental study on the effect of salt on the water absorption characteristic of cement mortar

[1]  Qianqian Wang,et al.  Water absorption behaviour of concrete: Novel experimental findings and model characterization , 2022, Journal of Building Engineering.

[2]  Lei Gao,et al.  Australian gridded chloride deposition-rate dataset , 2022, Data in brief.

[3]  M. Steiger,et al.  Damage potential and supersaturation of KNO3 and relevance in the field of salt damage to porous building material , 2022, Construction and Building Materials.

[4]  Yanfeng Liu,et al.  The impact of temperature and relative humidity dependent thermal conductivity of insulation materials on heat transfer through the building envelope , 2021, Journal of Building Engineering.

[5]  Yanfeng Liu,et al.  Effect of moisture transfer on heat transfer through exterior corners of cooled buildings in hot and humid areas , 2021 .

[6]  Wang Fei,et al.  Thermal and moisture performance parameters of high toughness engineered cementitious Composite(ECC) with PVA fibers , 2021 .

[7]  K. Beck,et al.  Towards a more effective and reliable salt crystallisation test for porous building materials: Predictive modelling of sodium chloride salt distribution , 2021, Construction and Building Materials.

[8]  M. Fener,et al.  Evaluation of the relationship between the physical properties and capillary water absorption values of building stones by regression analysis and artificial neural networks , 2021 .

[9]  M. Molnár,et al.  Experimental investigation of water absorption and penetration in clay brick masonry under simulated uniform water spray exposure , 2021 .

[10]  Zhao Tiejun,et al.  Capillary suction induced water absorption and chloride transport in non-saturated concrete: The influence of humidity, mineral admixtures and sulfate ions , 2020 .

[11]  F. Xing,et al.  Atmospheric chloride deposition in field concrete at coastal region , 2018, Construction and Building Materials.

[12]  S. Real,et al.  Chloride ingress into structural lightweight aggregate concrete in real marine environment , 2018, Marine Structures.

[13]  Peng Zhang,et al.  Water and chloride ions migration in porous cementitious materials: An experimental and molecular dynamics investigation , 2017 .

[14]  A. Moropoulou,et al.  Effect of temperature on water capillary rise coefficient of building materials , 2016 .

[15]  C. Andrade,et al.  Durability of concrete structures in marine atmosphere zones – The use of chloride deposition rate on the wet candle as an environmental indicator , 2010 .

[16]  J. Dai,et al.  Water absorption property of cracked concrete and effect of water repellent treatment , 2010 .

[17]  Michele Dondi,et al.  Predicting the initial rate of water absorption in clay bricks , 2009 .

[18]  K. Ramamurthy,et al.  Sorption Characteristics of Foam Concrete , 2007 .

[19]  Mark Bomberg,et al.  Analysis of Selected Water Absorption Coefficient Measurements , 2005 .

[20]  P. Mukhopadhyaya,et al.  Effect of Surface Temperature on Water Absorption Coefficient of Building Materials , 2002 .