New approach for coupled chloride/moisture transport in non-saturated concrete with and without slag

Abstract Over the paste decades a considerable research effort has been attributed to chloride ingress into reinforced concrete in order to understand the transport mechanisms and to predict its durability. In saturated concrete, chloride ions enter through diffusion (concentration gradient), whereas in partially saturated concrete, a part of the invading chloride is transported along with the salty water that was sucked by capillary absorption into the dried concrete. This study examines the effects of cyclic drying and wetting with chloride sodium on chloride ingress into non-saturated concrete. For this aim, a new automatic experimental setup has been developed to apply cyclic movement of chloride solution in controlled environmental conditions ambiance. Likewise, a new astute test method to control the concrete moisture content has been presented. As results, the first part of our study concerns chloride binding and water vapour adsorption isotherms. Results showed that Blast Furnace Slag (BFS), used as partial substitution of cement, increases the performances of concrete (BFSC60). Furthermore, the interaction chloride/concrete matrix seems to increase the adsorbed water vapour. In the second part of this research work, the influence of the moisture content, the number of cycles, the water-to-binder ratio and the slag’s addition on chloride profiles has been investigated and analysed. The results showed that the decreasing of relative humidity from 90% to 50% enabled to increase by ≈2–9 times the apparent chloride diffusion coefficient, which decreased when the number of cycles increased. A correlation between apparent diffusion coefficient and relative humidity has been obtained.

[1]  P. K. Mehta.  Concrete: Structure, Properties, and Materials , 1992 .

[2]  Olivier Coussy,et al.  Characterization and identification of equilibrium and transfer moisture properties for ordinary and high-performance cementitious materials , 1999 .

[3]  Michael D.A. Thomas,et al.  Performance of Slag Concrete in Marine Environment , 2008 .

[4]  Katrien Audenaert,et al.  Chloride binding of cement-based materials subjected to external chloride environment – A review , 2009 .

[5]  Y. Xu.  The influence of sulphates on chloride binding and pore solution chemistry , 1997 .

[6]  Olivier Truc,et al.  Prediction of Chloride Penetration into Saturated Concrete Multi-Species Approach , 2000 .

[7]  Carmen Andrade,et al.  Calculation of chloride diffusion coefficients in concrete from ionic migration measurements , 1993 .

[8]  S. Bonnet,et al.  Influence de la présence des ions chlorures sur les propriétés à l'équilibre de différents mortiers , 1999 .

[9]  J. J. Kollek.  The determination of the permeability of concrete to oxygen by the Cembureau method—a recommendation , 1989 .

[10]  Bishwajit Bhattacharjee,et al.  MODELING OF CHLORIDE DIFFUSION IN CONCRETE AND DETERMINATION OF DIFFUSION COEFFICIENTS , 1998 .

[11]  Mehmet Gesoğlu,et al.  A study on durability properties of high-performance concretes incorporating high replacement levels of slag , 2008 .

[12]  Vincent Picandet,et al.  Effect of axial compressive damage on gas permeability of ordinary and high-performance concrete , 2001 .

[13]  C. Andrade,et al.  A test method for measuring chloride diffusion coefficients through nonsaturated concrete. Part I. The instantaneous plane source diffusion case , 2002 .

[14]  R. D. Hooton,et al.  Effects of cyclic chloride exposure on penetration of concrete cover , 1999 .

[15]  Mette Rica Geiker,et al.  Chloride diffusion in partially saturated cementitious material , 2003 .

[16]  V. Baroghel-Bouny.  Water Vapour Sorption Experiments on Hardened Cementitious Materials: Part I: Essential Tool for Analysis of Hygral Behaviour and its Relation to Pore Structure , 2007 .

[17]  A. J. Al-Tayyib,et al.  USE OF POLYPROPYLENE FIBERS TO ENHANCE DETERIORATION RESISTANCE OF CONCRETE SURFACE SKIN SUBJECTED TO CYCLIC WET/DRY SEA WATER EXPOSURE , 1990 .

[18]  Patrick Dangla,et al.  Modelling of coupled ion and moisture transport in porous building materials , 2008 .

[19]  Kazuo Yamada,et al.  Chloride Binding of Cement Estimated by Binding Isotherms of Hydrates , 2005 .

[20]  Alaa Chateauneuf,et al.  A comprehensive probabilistic model of chloride ingress in unsaturated concrete , 2011 .

[21]  Mohamed Saafi,et al.  Temperature and moisture monitoring in concrete structures using embedded nanotechnology/microelectromechanical systems (MEMS) sensors , 2008 .

[22]  Tetsuya Ishida,et al.  Modeling of chloride transport coupled with enhanced moisture conductivity in concrete exposed to marine environment , 2009 .

[23]  Byung Hwan Oh,et al.  Effects of material and environmental parameters on chloride penetration profiles in concrete structures , 2007 .

[24]  Koichi Maekawa,et al.  Modeling of structural performances under coupled environmental and weather actions , 2002 .

[25]  Eugen Brühwiler,et al.  Capillary Suction and Diffusion Model for Chloride Ingress into Concrete , 2008 .

[26]  R. Vitaliani,et al.  Analysis of Chloride Diffusion into Partially Saturated Concrete , 1993 .

[27]  G. Bastian,et al.  Etude expérimentale du couplage hydro-chimique dans les bétons en cours de maturation: incidence sur les retraits , 1998 .

[28]  Ravindra K. Dhir,et al.  Developing chloride resisting concrete using PFA , 1997 .

[29]  E. Samson,et al.  Predicting the performance of concrete structures exposed to chemically aggressive environment—Field validation , 2002 .

[30]  Nick R. Buenfeld,et al.  Factors influencing chloride-binding in concrete , 1990 .

[31]  William John McCarter,et al.  NEAR-SURFACE SENSORS FOR CONDITION MONITORING OF COVER-ZONE CONCRETE , 2001 .

[32]  Lars-Olof Nilsson,et al.  Chloride binding capacity and binding isotherms of OPC pastes and mortars , 1993 .

[33]  Véronique Baroghel-Bouny,et al.  Water vapour sorption experiments on hardened cementitious materials. Part II: Essential tool for assessment of transport properties and for durability prediction , 2007 .

[34]  Yunping Xi,et al.  Chloride Penetration in Nonsaturated Concrete , 2003 .

[35]  James J. Beaudoin,et al.  Modeling ion and fluid transport in unsaturated cement systems in isothermal conditions , 2005 .

[36]  R. de Borst,et al.  Computational results of a model for chloride ingress in concrete including convection, drying-wetting cycles and carbonation , 2005 .