Automated fibre placement based composite structures: Review on the defects, impacts and inspections techniques

Abstract Automated fibre placement (AFP) offers high throughput, efficient and accurate manufacturing methods for making multi-stiffened laminated composites. However, processing conditions, machine tolerances and steering of tape can induce small random defects within the laminate, which may compromise the structural integrity. Thus, this paper presents a comprehensive review on the processing/steering-induced defects in AFP and their influence on the quality of the final product. Three key processing parameters in AFP, specifically consolidation force, lay-up speed and curing/melting temperature are attempted elaborately. Additionally, the paper attempted to present the discussions on in-situ process monitoring as well as the Machine Learning (ML) based predictive models for AFP based composites.

[1]  Simon Haykin,et al.  Neural Networks: A Comprehensive Foundation , 1998 .

[2]  Sanjay Mazumdar,et al.  Composites Manufacturing: Materials, Product, and Process Engineering , 2001, The Aeronautical Journal (1968).

[3]  T. K. Gangopadhyay,et al.  Fibre Bragg gratings in structural health monitoring—Present status and applications , 2008 .

[4]  Ignacio Maqueda Jiménez,et al.  High-strain composites and dual-matrix composite structures , 2014 .

[5]  Dawn C. Jegley,et al.  Design and Manufacture of Elastically Tailored Tow Placed Plates , 2002 .

[6]  Damiano Pasini,et al.  Defect layer method to capture effect of gaps and overlaps in variable stiffness laminates made by Automated Fiber Placement , 2013 .

[7]  Clemens Schmidt-Eisenlohr.  INTRODUCTION OF AUTOMATED 3D VACUUM BUILDUP IN THE COMPOSITE MANUFACTURING CHAIN , 2015 .

[8]  Peter Joyce,et al.  A Technique for Characterizing Process-Induced Fiber Waviness in Unidirectional Composite Laminates-Using Optical Microscopy , 1997 .

[9]  Michael R Wisnom,et al.  The Effect of Fibre Waviness on the Relationship between Compressive and Flexural Strengths of Unidirectional Composites , 1994 .

[10]  Xavier Maldague,et al.  Theory and Practice of Infrared Technology for Nondestructive Testing , 2001 .

[11]  Mahmood M. Shokrieh,et al.  Non-destructive testing (NDT) techniques in the measurement of residual stresses in composite materials: an overview , 2014 .

[12]  Patrick Tyler Langley,et al.  Finite Element Modeling of Tow-Placed Variable-Stiffness Composite Laminates , 1999 .

[13]  Anand Asundi,et al.  Structural health monitoring of smart composite materials by using EFPI and FBG sensors , 2003 .

[14]  Carlos Ramos,et al.  Health monitoring of composite structures by embedded FBG and interferometric Fabry-Pérot sensors , 2008 .

[15]  Rong-Sheng Lu,et al.  A Review of Optical NDT Technologies , 2011, Sensors.

[16]  John Huber.  Automated Lamination of Production Advanced Composite Aircraft Structures , 1981 .

[17]  Tobias Wille,et al.  ASSESSING THE STRUCTURAL RESPONSE OF AUTOMATED FIBRE PLACEMENT COMPOSITE STRUCTURES WITH GAPS AND OVERLAPS BY MEANS OF NUMERICAL APPROACHES , 2015 .

[18]  Ginu Rajan,et al.  Optical fiber Bragg grating sensors for process monitoring in advanced composites , 2016, 2016 IEEE Sensors Applications Symposium (SAS).

[19]  Douglas S. Cairns,et al.  Response of automated tow placed laminates to stress concentrations , 1993 .

[20]  Woon Lee,et al.  Composite Development and Applications for Cryogenic Tankage , 2005 .

[21]  Andrew C. Long,et al.  Textile Wrinkling in Composite Forming , 2006 .

[22]  Anand Asundi,et al.  On-line health monitoring of smart composite structures using fiber polarimetric sensor , 1999 .

[23]  H. Brussel,et al.  Design principles in filament winding , 1994 .

[24]  V. V. Bolotin.  Delaminations in composite structures: Its origin, buckling, growth and stability , 1996 .

[25]  Paul Compston,et al.  A combined optical-thermal model for near-infrared laser heating of thermoplastic composites in an automated tape placement process , 2015 .

[26]  R. A. Shenoi,et al.  A procedure to embed fibre Bragg Grating strain sensors into GFRP sandwich structures , 2007 .

[27]  Harald E.N. Bersee,et al.  Residual stresses in thermoplastic composites—A study of the literature—Part II: Experimental techniques , 2007 .

[28]  Y. Rao.  Recent progress in fiber-optic extrinsic Fabry–Perot interferometric sensors , 2006 .

[29]  Norman A. Fleck,et al.  Compressive Failure of Fiber Composites , 1997 .

[30]  Akshya Swain,et al.  Machine learning based process monitoring and characterisation of automated composites , 2017 .

[31]  Philippe Olivier,et al.  Assessment of cure residual strains through the thickness of carbon–epoxy laminates using FBGs, Part I: Elementary specimen , 2009 .

[32]  Isaac M Daniel,et al.  Elastic properties of composites with fiber waviness , 1996 .

[33]  Darryl P Almond,et al.  A new technique to detect defect size and depth in composite structures using digital shearography and unconstrained optimization , 2012 .

[34]  Joël Cugnoni,et al.  Monitoring and characterization of the interfacial fracture in sandwich composites with embedded multiplexed optical sensors , 2013 .

[35]  Hwa-Yaw Tam,et al.  Fundamentals and applications of optical fiber Bragg grating sensors to textile structural composites , 1998 .

[36]  A. Sawicki,et al.  THE EFFECT OF INTRAPLY OVERLAPS AND GAPS UPON THE COMPRESSION STRENGTH OF COMPOSITE LAMINATES , 1998 .

[37]  Carroll Grant,et al.  Automated processes for composite aircraft structure , 2006, Ind. Robot.

[38]  Kevin D Potter,et al.  Sources of variability in uncured aerospace grade unidirectional carbon fibre epoxy preimpregnate , 2007 .

[39]  Roberto Montanini,et al.  Simultaneous measurement of temperature and strain in glass fiber/epoxy composites by embedded fiber optic sensors: I. Cure monitoring , 2007 .

[40]  Brian Murphy,et al.  Safety & Certification Initiatives for Composite Airframe Structure , 2005 .

[41]  Michael R Wisnom,et al.  Analysis of Shear Instability in Compression Due to Fibre Waviness , 1993 .

[42]  Ralf Schledjewski,et al.  Identification of some optimal parameters to achieve higher laminate quality through tape placement process , 2010 .

[43]  Daniel O. Adams,et al.  Compression strength reductions in composite laminates due to multiple-layer waviness , 1995 .

[44]  Orlando Frazão,et al.  Simultaneous measurement of strain and temperature using fibre Bragg gratings in a twisted configuration , 2005 .

[45]  Xavier E. Gros,et al.  Current and future trends in non-destructive testing of composite materials , 2000 .

[46]  Antonio Quintela Incera,et al.  Fiber Optic Sensors in Structural Health Monitoring , 2011, Journal of Lightwave Technology.

[47]  A. Arockiarajan,et al.  Defects in composite structures: Its effects and prediction methods – A comprehensive review , 2013 .

[48]  John W. Gillespie,et al.  Influence of Ply Waviness on the Stiffness and Strength Reduction on Composite Laminates , 1992 .

[49]  A. Méndez,et al.  Overview of Fiber Optic Sensors for NDT Applications , 2013 .

[50]  Nobuo Takeda,et al.  Real-time Detection of Debonding between Honeycomb Core and Facesheet using a Small-diameter FBG Sensor Embedded in Adhesive Layer , 2007 .

[51]  Paul M. Weaver,et al.  Limitations of fibre placement techniques for variable angle tow composites and their process-induced defects , 2011 .

[52]  Tomasz R. Wolinski,et al.  The influence of thermal expansion of a composite material on embedded polarimetric sensors , 2011 .

[53]  Anthony M. Waas,et al.  Effect of Fiber Waviness on the Compressive Strength of Unidirectional Carbon Composites , 2012 .

[54]  K. Potter,et al.  The engineering aspects of automated prepreg layup: History, present and future , 2012 .

[55]  Ginu Rajan,et al.  In situ process monitoring for automated fibre placement using fibre Bragg grating sensors , 2016 .

[56]  Z. Gurdal,et al.  Design and Manufacture of a Variable-Stiffness Cylindrical Shell , 2009 .

[57]  Isaac M Daniel,et al.  Effects of material and geometric nonlinearities on the tensile and compressive behavior of composite materials with fiber waviness , 2001 .

[58]  Ginu Rajan,et al.  Thermal sensitivity and relaxation of carbon fibre-foam sandwich composites with fibre optic sensors , 2016 .

[59]  Ranga Pitchumani,et al.  Design and Optimization of a Thermoplastic Tow-Placement Process with In-Situ Consolidation , 1997 .

[60]  Raúl Rojas,et al.  Neural Networks - A Systematic Introduction , 1996 .

[61]  James H. Starnes,et al.  Structural Response of Compression-Loaded, Tow-Placed, Variable Stiffness Panels , 2002 .

[62]  Todd Rudberg,et al.  Automated In-Process Inspection System for AFP Machines , 2015 .

[63]  Vadakke Matham Murukeshan,et al.  Cure monitoring of smart composites using Fiber Bragg Grating based embedded sensors , 2000 .

[64]  M. Lizaranzu,et al.  Comparison and analysis of non-destructive testing techniques suitable for delamination inspection in wind turbine blades , 2011 .

[65]  Z. Qureshi,et al.  In situ consolidation of thermoplastic prepreg tape using automated tape placement technology: Potential and possibilities , 2014 .

[66]  Norman A. Fleck,et al.  Compression Failure Mechanisms in Unidirectional Composites , 1992 .

[67]  S. M. Grove,et al.  Thermal modelling of tape laying with continuous carbon fibre-reinforced thermoplastic , 1988 .

[68]  Remko Akkerman,et al.  Intimate contact development in laser assisted fiber placement , 2016 .

[69]  Norman A. Fleck,et al.  Microbuckling of fiber composites with random initial fiber waviness , 1994 .

[70]  Lei Wang,et al.  EFFECTS OF IN-PLANE FIBER WAVINESS ON THE STATIC AND FATIGUE STRENGTH OF FIBERGLASS , 2001 .

[71]  Paul Compston,et al.  The effect of processing temperature and placement rate on the short beam strength of carbon fibre-PEEK manufactured using a laser tape placement process , 2015 .

[72]  G Dorey,et al.  Carbon fibres and their applications , 1987 .

[73]  Paul Compston,et al.  Laser-Assisted Tape Placement of Thermoplastic Composites: The Effect of Process Parameters on Bond Strength , 2014 .

[74]  Paul M. Weaver,et al.  Continuous tow shearing for manufacturing variable angle tow composites , 2012 .

[75]  Ginu Rajan,et al.  Characterization of process-induced defects in automated fiber placement manufacturing of composites using fiber Bragg grating sensors , 2018 .

[76]  Zafer Gurdal,et al.  A Theoretical Model to Study the Influence of Tow-drop Areas on the Stiffness and Strength of Variable-stiffness Laminates , 2009 .

[77]  Stepan Vladimirovitch Lomov,et al.  Influence of fibre misalignment and voids on composite laminate strength , 2015 .

[78]  Ginu Rajan,et al.  In-situ simultaneous measurement of strain and temperature in automated fiber placement (AFP) using optical fiber Bragg grating (FBG) sensors , 2017 .

[79]  Damiano Pasini,et al.  Experimental study of the effect of automated fiber placement induced defects on performance of composite laminates , 2011 .

[80]  Ran Y. Kim,et al.  Strength Prediction and Measurement in Model Multilayered Discontinuous Tow Reinforced Composites , 2004 .

[81]  Gary L. Anderson,et al.  Current and potential future research activities in adaptive structures: an ARO perspective , 2001 .