A CFD Study of Hong Kong Refuge Floor Design: Floor Height Effect

Abstract Since 1996, the provision of a refuge floor has been a mandatory feature for all new tall buildings in Hong Kong. These floors are designed to provide for the building occupants a fire safe environment that is also free from smoke. However, the desired cross ventilation on these floors to achieve the removal of smoke, assumed by the Building Codes of Hong Kong, is still being questioned so that a further scientific study of the wind-induced ventilation of a refuge floor is needed. This paper presents an investigation into this issue. The developed computational technique used in this paper was adopted to study the wind-induced natural ventilation on a refuge floor. The aim of the investigation was to establish whether a refuge floor with a central core and having cross ventilation produced by only two open opposite external side walls on the refuge floor would provide the required protection in all situations taking into account behaviour of wind due to different floor heights, wall boundary conditions and turbulence intensity profiles. The results revealed that natural ventilation can be increased by increasing the floor height provided the wind angle to the building is less than 90°. The effectiveness of the solution was greatly reduced when the wind was blowing at 90° to the refuge floor opening.

[1]  Nur Demirbilek,et al.  Effects of building wall arrangements on wind-induced ventilation through the refuge floor of a tall building , 2008 .

[2]  Wan Ki Chow,et al.  Numerical Studies on Fire-Induced Flow in a Highrise Residential Building , 2000 .

[3]  K. M. Lam,et al.  Wind environment around the base of a tall building with a permeable intermediate floor , 1992 .

[4]  Charles C.K. Cheng,et al.  A fire safety study of Hong Kong refuge floor building wall layout design , 2009 .

[5]  George T. Tamura,et al.  Smoke movement and control in high-rise buildings , 1994 .

[6]  T. Jin,et al.  Experimental Study Of Human Behavior In Smoke Filled Corridors , 1989 .

[7]  Timothy A. Reinhold,et al.  Wind tunnel modeling for civil engineering applications : proceedings of the International Workshop on Wind Tunnel Modeling Criteria and Techniques in Civil Engineering Applications, Gaithersburg, Maryland, USA, April 1982 , 1982 .

[8]  Siuming Lo,et al.  A CFD Study of Air Movement in Designated Refuge Floor , 2001 .

[9]  Kohyu Satoh,et al.  A Numerical Study of Window-to-Window Propagation in High-Rise Building Fires , 1991 .

[10]  Siuming Lo,et al.  A preliminary investigation of airflow field in designated refuge floor , 2001 .

[11]  C. C. K. Cheng,et al.  A Cfd Study Of Wind-Induced Flow Of Refuge Floor Designs Using Centred Service Core Shapes , 2007 .

[12]  Gordon E. Hartzell,et al.  Criteria and methods for evaluation of toxic hazard , 1987 .

[13]  K. K. Yuen,et al.  CFD wind tunnel test: Field velocity patterns of wind on a building with a refuge floor , 2005 .

[14]  Christopher Baker,et al.  Experimental measurements and computations of the wind-induced ventilation of a cubic structure , 2000 .

[15]  Takashi Kurabuchi,et al.  Study on airflow characteristics inside and outside a cross-ventilation model, and ventilation flow rates using wind tunnel experiments , 2001 .

[16]  Siuming Lo,et al.  A study of natural ventilation in a refuge floor , 2007 .

[17]  Siuming Lo,et al.  Wind Tunnel and CFD Studies on Wind Flow Around a High-Rise Building with a Refuge Floor , 2005 .

[18]  O. Sugawa,et al.  Flow behavior of ejected fire flame/plume from an opening effected by external side wind , 1997 .

[19]  Charles Chor Kwan Cheng.  Wind-induced natural ventilation of the refuge floor of a high-rise building in Hong Kong , 2006 .

[20]  Siuming Lo,et al.  An Investigation of the Impact of Floor Setting on Airflow and Smoke Extraction in Designated Refuge Floor , 2001 .